Latest patch cord scrap Tenders | Government patch cord scrap Tenders

State Government

CTN :41340893

26 Aug, 2025 NA

Rupnagar - Punjab

Tender For supply of pipe and fitting c c - copper alloy gate valve for waterworks purpose as per is 778 (q3) , sluice valve for water works purposes (50 to 1200 mm size) (v2) as per is 14846 (q3) , swing check type reflux valves for water works purposes (single door pattern) (v2) as per is 5312 (part1) (q3) , grinder pipe cutting blade 4 inches , grinder pipe cutting blade 8 inches , emery paper , g.i pipe 2 inches , rubber sheet , stainless steel nut bolt , pipe flanges rubber sheet , binding wire , steel wire brush , slide wrench , pipe wrench , plier 200 mm , water proof tape , rust remover wd 40 spray , water pressure guage meter

corporations/Associations/Others

CTN :41342191

14 Aug, 2025 NA

Bharuch - Gujarat

Tender For auction sale of meter scrap as per lot description,transformer scrap as per lot description,11 kv ctpt units scrap all size,22 kv ctpt units scrap all size,all aluminum alloy conductor scrap,acsr consuctor scrap,theft attempted transformers only body scrap,iron scrap,wooden scrap,alluminium misellenius scrap,empty oil barrel scrap,alluminium power cable scrap lt abc,alluminium power cable scrap ht abc/xlpe cable,pvc alluminium wire scrap (all type),mild steel m s scrap (steel cash box with key)

corporations/Associations/Others

CTN :41342219

19 Aug, 2025 NA

Surendranagar - Gujarat

Tender For auction sale of m.s. girder scrap,vir/pvc wire (allu),pvc coated alloy conductor,pvc armoured service cable scrap,empty oil barrel,tvm meter & transformer scrap as per lot description,wooden scrap,m.s. scrap,acsr cond. scrap,cable

Central Government/Public Sector

CTN :41332548

16 Aug, 2025 34.80 Lacs

Ranga Reddy-T - Telangana

Tender For tender for supply of procurement of raw materials c c - austenitic type (303 se) free machining non-magnetic bright quality stainless steel hexagonal bar conforming to hal std 1206 / 303 se , astm a 582 / ams 5641 / ams 5640 type 2 / mil-s-7720 , 303 se / bs 303 s 41 , bs 970 / aisi 303 se size a/f 6 mm x 2 to 3 meters in length. , brass round hal std 1301 , is 319 , type-1 1/2hard , dia 4mm x 2 to 3 meters length , half finished brass material tube dia 4 x 0.5 of 1000mm hal std 1307/is407-81 grade cuzn37 , naval brass rods , condition annealed , conforming to is 291 1989 , grade 1 , / hal std 1302 / bs 2824 gr cz-112 , size dia 4mm x 2 to 3 meters in length , cold rolled brass sheet , strip& foil th cond half hardcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cu zn 37 , cw508l-en1652-r350/ th. 0.2 mm , min. size 350 x 1200 mm. hal std 1300-hb. it should be protected with pvc coating morethan 50micro on both sides , cold rolled brass sheet , strip& foil th cond half hardcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cu zn 37 , cw508l-en1652-r350/ th.0.4 mm , min. size 350 x 1200 mm. hal std 1300-hb. it should be protected with pvc coating morethan 50micro on both sides , rivetting quality brass wire conf.hal std 1303 , is 4413-cuzn-37 annealed condition dia 4mm , bare copper wire , condition annealed , conforming to hal std 6054 grade b / is 8130 / bs 128 / astm b-3 , size dia 0.5 mm in spools , alluminium alloy sheet , hal std 1252-1/2h , confirming to is gr 31000(ns3) is 737 en 573-3-3003 or 3013 , dh bs 1470 - 3103 h-14 (ns-3) - 1/2h (h4) , size thickness 1.0 x 1000 x 2000 mm with pvc coating on both sides. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 th.thickness 12 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250 , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 14 mm , min. size 1000x2000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 16 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy sheets , spec. 2014/2014 a-t6 /wp , cladding 1050 a /1070/19500/19700/6003 on both sides as per bs l165/bs l167 / en 4400- 2/en 2087/gr 24345-wp al.clad , is 3436/al.clad 2014 , astm b209/ams 4029 clad/hal std 1250 , th.thickness 2.0 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std.1250. it should be protected with transparent pvc coating morethan 50micro on both sides. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 6.0 mm , min. size 1000x2000mm , tolerances as per ansi h35.2/ hal std.1250. , one side/two sides polished(ra 0.2 micro m) non-fading black electro coloured anodized ( as per mil-a-8625 , type ii , class 2 ) sheet aluminium specification hal-1255 condition 3/4 hard or is737-19000- h6 size thickness 0.5 mm x 300mm x 300mm , ptfe/teflon round conforming to hal std 6251 mil-p-19468a or astm-d-1710 , grade-ii , type -3 , class-d dia 6 mm x 500 mm in length , nylon round type -66. dia 12 mm.hal std 1851 , glass epoxy laminated sheet , conforming to hal std 1807 , nemali -1- 98 , gr fr4 / bsen 60893 - 3- 2 epgc 202 / bs 3953 type ep4 / mil - 1 - 24768 / 27 type gee - f(fr4) size thickness 1.5 mm x 1220 mm x 1220 mm. , copper claded glass epoxy laminates conf. to ipc-4101 b/26 with tg greater than or equal to 170 degree c with 1 oz copper on bo

Central Government/Public Sector

CTN :41317323

25 Aug, 2025 NA

Delhi - Delhi

Tender For supply of tools , m and s , mavic ent , mavic zoom , mavic pro , phantom pro multifunction protected hot air and iron digital rework station, desktop magnifier lamp with led light, soldering iron 35 w, soldering iron 50 w, desoldering pump, variable dc power supply 0-30 v variable 30 a , hand held digital multimeter, clamp meter , fume extractor table top for soldering purpose , pcb holder table top for soldering purpose , glue gun 30w , glue sticks super strong, glue sticks transparent, soldering flux , soldering flux liquid , allen keys, hex screwdriver set, torx screw driver set, long nose plier size standard 20.5 x 7.4, lxw, combination plier size 21l x 1.2 w cms weight 340 gms , multi bit screw driver set size 24 x3 x 3 cms lwh, electric mini screw driver , precision screw driver 6 set made of alloy steel, insulated tweezer various sizes, smart tweezer , automatic wire stripper and cutter, wire cutter , crimping tool , silicone magnetic soldering repair mat , rivet gun , rivets for rivet gun, needle file set, hammer set, snap off cutter knife, snap off cutter knife blade, magnetic screw tray 140 x 240 mm size shape rectangular, isopropyl alcohol, multipurpose adhesives t 9000, spudger set for uav dissembling, opening tool for uav dissembling, normal plastic tray 16 inch x 16 inch, air duster, dust ball dust cleaner, hacksaw small 20x20x 5 cm, soldering tip iron cleaner, esd wrist band size 16x8x6 cm weight 50 g, magnetizing demagnetizing tool, fireproof battery bags, gimbal signal cable tester ptz flat cable roll axis tester for mavic , gimbal signal cable tester ptz flat cable roll axis tester for phantom 4, multifunctional puller looping splitting stripping wire and crimping tool , rj 45 , cat 6 utp cable , battery cycleranalyzer li po li- ion 6 cell to 8 cell capacity , lora module , zigbee module , raspberry pi ) /bid number : gem/2025/b/6528749 * /dated: 03-08-2025 & & / bid document 1 / 138

Central Government / Public Sector

CTN :41339522

12 Sep, 2025 NA

Guntakal - Andhra Pradesh

Tender For set of slings consisting of two items: (1) 4 legged steel wire rope sling of total capacity (swl): 3ton, ea ch leg 12mm dia x 8 feet length with master round ring dia: 32mm x 250mm id with subring at top and 2ton capac ity alloy steel eye hook at bottom. qty-01 no./set (2) 4 legged polyester sling of total capacity (swl): 3ton, each leg 2ton x 8 feet length with master round ring dia: 32mm x 250mm id with subring at top and 2ton capacity alloy ste el eye hook at bottom. qty-01 no./set. note: test certificate to be provided along with supply of material. ]

Corporations/Associations/Others

CTN :41314785

18 Aug, 2025 25.40 Lacs

Multi City - Karnataka

Tender For package-02 - slm at ward no.1,2,18,19,20,21 & 22. - hpsv lamp fixtures should be of single piece gravity die cast lm6 alloy, isi marked street light luminaries suitable for watt elliptical high pressure sodium lamp made by gravity die cast aluminium housing. high transparent acrylic bowl firmly held with the canopy by means of stainless steel toggles and rubber, gasket. optical control is provided by reflectors, supplying & fixing led drivers suitable for 5700k led fitting outdoor fixtures. operating voltage range from 180v to 265v, 50hz ac power supply, 150w 5700k suitable for outdoor led fitting., supplying & fixing led drivers suitable for 5700k led fitting outdoor fixtures. operating voltage range from 180v to 265v, 50hz ac power supply, 70w 5700k suitable for outdoor led fitting., supplying & fixing led drivers suitable for 5700k led fitting outdoor fixtures. operating voltage range from 180v to 265v, 50hz ac power supply, 40w 5700k suitable for outdoor led fitting., hpmh lamp fixtures should be of single piece gravity die cast lm6 alloy, isi marked street light luminaries suitable for watt elliptical high pressure sodium lamp made by gravity die cast aluminium housing. high transparent acrylic bowl firmly held with the canopy by means of stainless steel toggles and rubber, gasket. optical control is provided by reflectors, operation and maintenance of 120/400 watt bay integeal induction luminary fittings die cast aluminum base with suitable prewired electronic control gear to operate on 230v/50hz/ac supply and suitable wattage induction lamp., single piece aluminum deep drawn street lighting luminaire with acrylic cover 85 wats cfl lamp with all accessories. cfl lamp-85, operation and maintenance of light sources mentioned below as 1(a) to (d) and (2) and cost of men and material as directed by the engineer in-charge here the work includes supply and replacement of all components/materials such as lamps, chokes /ballasts, starters, condensers, ignitors, side holders, wire etc

Corporations/Associations/Others

CTN :41314858

18 Aug, 2025 25.41 Lacs

Multi City - Karnataka

Tender For package-01- slm at ward no.3,4,5,6,14,15,16 & 17. - hpsv lamp fixtures should be of single piece gravity die cast lm6 alloy, isi marked street light luminaries suitable for watt elliptical high pressure sodium lamp made by gravity die cast aluminium housing. high transparent acrylic bowl firmly held with the canopy by means of stainless steel toggles and rubber, gasket. optical control is provided by reflectors, supplying & fixing led drivers suitable for 5700k led fitting outdoor fixtures. operating voltage range from 180v to 265v, 50hz ac power supply, 150w 5700k suitable for outdoor led fitting., supplying & fixing led drivers suitable for 5700k led fitting outdoor fixtures. operating voltage range from 180v to 265v, 50hz ac power supply, 70w 5700k suitable for outdoor led fitting., supplying & fixing led drivers suitable for 5700k led fitting outdoor fixtures. operating voltage range from 180v to 265v, 50hz ac power supply, 40w 5700k suitable for outdoor led fitting., hpmh lamp fixtures should be of single piece gravity die cast lm6 alloy, isi marked street light luminaries suitable for watt elliptical high pressure sodium lamp made by gravity die cast aluminium housing. high transparent acrylic bowl firmly held with the canopy by means of stainless steel toggles and rubber, gasket. optical control is provided by reflectors, operation and maintenance of 120/400 watt bay integeal induction luminary fittings die cast aluminum base with suitable prewired electronic control gear to operate on 230v/50hz/ac supply and suitable wattage induction lamp., single piece aluminum deep drawn street lighting luminaire with acrylic cover 85 wats cfl lamp with all accessories. cfl lamp-85, operation and maintenance of light sources mentioned below as 1(a) to (d) and (2) and cost of men and material as directed by the engineer in-charge here the work includes supply and replacement of all components/materials such as lamps, chokes /ballasts, starters, condensers, ignitors, side holders, wire etc

Corporations/Associations/Others

CTN :41315136

18 Aug, 2025 25.41 Lacs

Multi City - Karnataka

Tender For tender for fluorescent lamp, 250 w hpsv, 400w metal halide (mh) lamp fixtures, 40 w 5700 k suitable for outdoor led fitting, 70 w 5700 k suitable for outdoor led fitting, 150 w 5700 k suitable for outdoor led fitting - hpsv lamp fixtures should be of single piece gravity die cast lm6 alloy, isi marked street light luminaries suitable for watt elliptical high pressure sodium lamp made by gravity die cast aluminium housing. high transparent acrylic bowl firmly held with the canopy by means of stainless steel toggles and rubber, gasket. optical control is provided by reflectors, supplying & fixing led drivers suitable for 5700k led fitting outdoor fixtures. operating voltage range from 180v to 265v, 50hz ac power supply, 150w 5700k suitable for outdoor led fitting., supplying & fixing led drivers suitable for 5700k led fitting outdoor fixtures. operating voltage range from 180v to 265v, 50hz ac power supply, 70w 5700k suitable for outdoor led fitting., supplying & fixing led drivers suitable for 5700k led fitting outdoor fixtures. operating voltage range from 180v to 265v, 50hz ac power supply, 40w 5700k suitable for outdoor led fitting., hpmh lamp fixtures should be of single piece gravity die cast lm6 alloy, isi marked street light luminaries suitable for watt elliptical high pressure sodium lamp made by gravity die cast aluminium housing. high transparent acrylic bowl firmly held with the canopy by means of stainless steel toggles and rubber, gasket. optical control is provided by reflectors, operation and maintenance of 120/400 watt bay integeal induction luminary fittings die cast aluminum base with suitable prewired electronic control gear to operate on 230v/50hz/ac supply and suitable wattage induction lamp., single piece aluminum deep drawn street lighting luminaire with acrylic cover 85 wats cfl lamp with all accessories. cfl lamp-85, operation and maintenance of light sources mentioned below as 1(a) to (d) and (2) and cost of men and material as directed by the engineer in-charge here the work includes supply and replacement of all components/materials such as lamps, chokes /ballasts, starters, condensers, ignitors, side holders, wire etc

corporations/Associations/Others

CTN :41327496

20 Aug, 2025 NA

Chandigarh - Chandigarh

Tender For auction sale of steel scrap class b,s.s. wire scrap,copper scrap grade 1,tinned copper wire scrap,copper scrap gr c-137 c-1-3t,tin copper dross,zinc iron dross scrap,galvanised steel wire scrap,mixed plastic scrap (dana u/s),pvc scrap,cable scrap pure copper plastic coated,cable mixed scrap,a.p.mine cable scrap,tyre and tube rubber scrap,kevlar 49 yarn2160 denier ty 9,scrap of different types of mixed cables,mixed plastic scrap,mixed conductor scrap,it e-waste disposal discord it equipments,mixed scrap alluminium alloy, glass, rubber etc.,coal dust/coal,aceton bottle 2.5 ltrs

Patch Cord Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors