Latest patching compound Tenders | Government patching compound Tenders

State Government

CTN :45727491

17 Jul, 2026 NA

Mehsana - Gujarat

Tender For providing and operating paver finisher, pneumatic road roller,miling machine and dumper for laying hot mix material supplied by palodar hot mix plant in judiristriction of r&b division mehsana (annual rate)

State Government

CTN :45744608

18 Jul, 2026 NA

Mehsana - Gujarat

Tender For paver work labour charges for laying of different types of hot mox material to different site prepared from palodar govt hot mix plant dist : mehsana (annual rate)

CTN :45280777

02 Jul, 2026 16.00 Lacs

Srinagar - Jammu And Kashmir

Tender For bid to ras supply of construction sub base and base 168 sqm , supply and stacking of graded stone aggregate , providing and laying wet mix macadam on prepared sub grade sub base , providing and applying tack coat using hot straight run bitumen , providing and laying 15mm thick premix bituminous macadam base course with stone aggregate , providing and laying 15mm thick semidence bituminous concrete using material aggregate , curbing , providing and laying stone soling dully hand packed , providing and laying in position cement concrete , providing and laying in position specified grade of cement concrete , centring and shuttering , synthetic layer , supply and installation of badminton post , badminton racket branded , water remover roller imported , water drainage system , tarpaulin , digital score board with accessories 2 by 3 , led sports light , installation and commission charges

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45700439

27 Jul, 2026 NA

West Nimar - Madhya Pradesh

Tender For providing and supply of civil construction goods and jcb and poklaind on rental basis - providing and supply of civil construction goods and jcb and poklaind on rental basis, 6mm machine broken aggreate, 10mm machine broken aggreate, 12mm machine broken aggreate, 20mm machine broken aggreate, 40mm machine broken aggreate, river send, balu send, moorrum, gobar khad, stone dust, black soil, cement isi mark 43 grade (50 kg), cement isi mark 53 grade (50 kg), hot rolled hyysd bars isi marked 6mm, hot rolled hyysd bars isi marked 8mm, hot rolled hyysd bars isi marked 10mm, hot rolled hyysd bars isi marked 12mm, hot rolled hyysd bars isi marked 16mm, hot rolled hyysd bars isi marked 20mm, hot rolled hyysd bars isi marked 25mm, plastic paint of approved brand isi marked, iron jaali, angle, tube, door, window, chamber plate all type, corrugated gi sheet isi mark, acp pannel installation re erection opening etc, painting steel work boundry wall etc including material etc, painting rcc work boundry wall etc including material etc, cement brick, red farsi 40mm thk, kota stone 20mm thk, mosaiqe tiles 20mm thk, giazed tiles 6mm thk, granite 20mm thk, vitrified tiles, mixer machine including fuel operator etc, viberator including fuel operator etc, concrete breaker machine, latrine seat indian, urinal seat, jcb machine & breaker including fuel operator etc, distember oil bound of approved brand isi mark, tarpin, centering material complete, paver block 80mm thk, tree guard, drainage chamber cober cast iron, rcc pipe np3 150mm dia, rcc pipe np3 200mm dia, rcc pipe np3 250mm dia, rcc pipe np3 300mm dia, rcc pipe np3 400mm dia, rcc pipe np3 450mm dia, rcc pipe np3 500mm dia, rcc pipe np3 600mm dia, rcc pipe np3 1000mm dia, rcc pipe np3 1200mm dia, writing work on stone all type, pot hole repir of exiting bituminous roads with hot mix, black stone / material m send, white cement, white lime chuna, oil paint, poclain machine & breaker including fuel operator etc, tractor with tralli including fuel operator etc, road marking, hyva (heavy duty or dump trucks) with fuel driver & transportion up to 10 km, pvc pipe 6kg 160mm dia, pvc pipe 8kg 160mm dia, pvc pipe 6kg 90mm dia, pvc pipe 4kg 75mm dia, cement concrete grade m-30 (incl. formwork, transportation, excavation, quring all work)

State Government

CTN :45696571

03 Jul, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate (lrm) for supplying of materials (construction plantation materials) for mgnrega work under murarai-ii development block - coal (steam), bitumen vg-30, bitumen emulsion, hire charges of diesel road roller- 8 to 10 tonne, diesel oil, stone screening type a (13.2 mm), stone screening type b (11.2mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, 1st class traditional bricks (kiln burnt), fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, rcc pipe 1000 mm dia np -3 spigot, rcc pipe 1200 mm dia np - 3 spigot, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, mild steel tubes hot finished seamless type, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, galvanised steel plain sheets, seam bolts and nuts 6 mm dia and 25 mm long, g.i. plain washer for seam bolts, stainless steel bolts /square bar and plates, welding by electric plant, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material, stone a

CTN :45692319

06 Jul, 2026 19.24 Lacs

Udhampur - Jammu And Kashmir

Tender For supply of pipe unions confirming to is 1239 (part 2) (q4) , elbow, equal, 135 degrees conforming to is 1239 (part 2) (q4) , elbows reducing confirming to is 1239 (part 2) (q4) , running nipples, close taper nipples and barrel nipples confirming to is 1239 (part 2) (q4) , steel sockets confirming to is 1239 (part 2) (q4) , socket reducing confirming to is 1239 (part 2) (q4) , elbows, tees and crosses, male, equal confirming to is 1239 (part 2) (q4) , elbows, tees and crosses, equal confirming to is 1239 (part 2) (q4) , plug confirming to is 1239 (part 2) (q4) , switch changeover side handle 630a 4p , switch changeover front operated 320a 4p , changeover switch front operated 200a 4p with ss enclosure , changeover switch side handle 100a 4p with ss enclosure , sensolite 9w motion sens led bulb , switch changeover front operated 400a 4p , sensolite 12w motion sens led bulb , tyre coupling s100 for pump and mot 20 no , tyre coupling s100 for pump and motor 17 no , tyre coupling s100 for pump and motor 18 no , tyre coupling s100 for pumpand mot 14 no , tyre coupling s100 for pumpand mot 15 no , float valve complete ptmt 15mm , mak premix ready road repair patching compound f roads flo packing size 25 kg , switch changeover side handle 63a 4p , casing capping 25x25mm , casing capping 20x25mm , rubber flange 12 inch , casing capping 15x25mm , casing capping 15x20mm , rubber flange 10 inch , rubber flange 8 inch , rubber flange 6 inch , float valve complete ptmt 20mm , rubber flange 4 inch , tissue paper stand with flap chrome finished , sliding bolt aluminium 200 mm long , rubber sheet gasket 3mm thickness , hacksaw blade double side1 inch x12 inch , ms studs bolts of size 6mm dia x 25mm length with nut and washer , ms studs bolts of size 6mm dia x 30mm length with nut and washer , ms studs bolts of size 6mm dia x 35mm length with nut and washer , ms studs bolts of size 6mm dia x 40mm length with nut and washer , ms studs bolts of size 6mm dia x 50mm length with nut and washer , ms studs bolts of size 10mm dia x 25mm length with nut and washer , ms studs bolts of size 10mm dia x 50mm length with nut and washer , ms studs bolts of size 10mm dia x 75mm length with nut and washer , ms studs bolts of size 12mm dia x 35mm length with nut and washer , ms studs bolts of size 12mm dia x 50mm length with nut and washer , ms studs bolts of size 12mm dia x 75mm length with nut and washer , ms studs bolts of size 12mm dia x 100mm length with nut and washer , ms studs bolts of size 16mm dia x 75mm length with nut and washer , ms studs bolts of size 16mm dia x 100mm length with nut and washer , ms studs bolts of size 16mm dia x 150mm length with nut and washer , pvc lid for 500 l water tank , ottoseal silicon sealant s70 310ml , mosaic tiles , solvent cement 100 ml tin , incandecent lamp 100w , distilled water for batteries , euroload type switch changeover front operated 160a 25 ka 4p on load , euroload type switch changeover front operated 200a2 5 ka 4p on load , euroload type switch changeover front operated 250a 35 ka 4p on load , euroload type switch changeover front operated 320a 35 ka 4p on load , euroload type switch changeover front operated 400a 50 ka 4p on load , euroload type switch changeover front operated 630a 50 ka 4p on load , tyre coupling s100 for pump and motor 12 no , arc welding rod 3 point 15mm x 450mm 100 nos , dead plug 80mm , ms studs bolts of size 6 point 5mm dia x 75mm length with nut and washer , ms studs bolts of size 5mm dia x 100mm length with nut and washer , ms studs bolts of size 6 point 5 mm dia x 100mm length with nut and washer , ms studs bolts of size 5mm dia x 75mm length with nut and washer , ms studs bolts of size 8 point 5 mm dia x 150mm length with nut and washer , float valve 25mm , float valve 40mm , float valve 50mm , pop up sprinklers 8504 to flow 10 -15 mtr radious suitable for 25mm dia , sliding bolt cp 250 mm long , sliding bolt cp 300 mm long , aluminum sheet 0 point 50mm thick 1220x2440mm , m-se

corporations/Associations/Others

CTN :45657702

14 Jul, 2026 NA

Gulbarga - Karnataka

Tender For supply of titanium reconstruction plate without condylar unit left side , titanium reconstruction plate without condylar unit right side , wire cutter , wire twister , acrylic polishing cake , acrylic teeth high impact , agar agar , airortor lubricant spray , alginate , alloy - pfm , articulating paper , articulator hinge type , autoclavable self sealing sterilization pouches 90 by 260mm , autoclave bin large , autoclave bin medium , autoclave bin small , base former , beading wax , betadine , bonding agent 5th generation , boxing wax , carborundum disc big thick , carborundum disc small thin , cement spatula , ceramic building brush size 4 , ceramic building brush size 6 , ceramic powder dentin a2 , ceramic separating media , cheek retractor large , crown remover kit , curved artery forceps , dental plaster , dental stone , denture adhesive , diamond disc , die hardener , die lubricant , die stone , disc mandrel , disposable patient drape , droppers for resin , fiber post , fox plane , gauze , gingival mask gingifast elastic or gingimask , glass spirit lamp , glaze liquid , green cloth , greenstick compound , hammer , head cap , heat cure acrylic resin liquid , heat cure acrylic resin powder , hot plate , impression compound , impression material addition silicon light body , impression material addition silicon putty , impression trays-dentulous perforated , impression trays- dentulous rimlock non perforated , impression trays- dentulous rimlock perforated , impression trays-edentulous non perforated , impression trays-edentulous perforated , inlay wax soft box , instrument disinfection spray glutaraldehyde 2 percent , intraoral photographic mirror , investment material-packets bego , lacron carver , lignocaine gel , lignocaine spray , local anaesthesia lignocaine hcl 2 percent with adrenaline 1 ratio 80000 , macintosh sheet , metal gauge , metal polishing cake , metal scale , modelling wax , mouth mask , mouth mirror with handle , mouth prop adult or pediatric , nitrile gloves m , non eugenol zinc oxide impression paste , peeso reamer , plaster spatula curved , plaster spatula-straight , polishing buff , porcelain mixing jar , pumice , retraction cord size 000 , ring liner , rubber bowl-large , rubber bowl-small , sandpaper , sandpaper mandrel , self cure resin pink liquid , self cure resin pink powder , separating media , spirit , stainless steel tray-medium with lid 8 by 3 inch , sticky wax , surgical gloves size7 , tooth coloured inlay wax , tooth preparation burs 25ef , tooth preparation burs sf 11 , tooth preparation burs so 12 , tooth preparation burs tc 11 , tooth preparation burs tf 11 , tooth preparation burs tr 13 , universal plier , universal tray adhesive , varsity dental flask , vaseline , wax guage , wax knife , wax spatula , zinc oxide eugenol impression paste saline , bone curettes , bone cutting bur 701,702,703, bone graft , composite kit , d finder #10 25mm, d finder #15 25mm, d finder #8 25mm, dispensing gun , edta gel, edta liquid, etchant , eugenol , gg drill, gic type 1, gp cones 2% no 15 , gp cones 2% no 20, gp cones 2% no 25, gp cones 4% no 20, gp cones 6% no 20, gp cones 6% no 25, high cu amalgam alloy, k file #15 21mm, k file #8 25mm, k-files #10 21mm, k-files #10 25mm, k-files #15 25mm, k-files #6 21mm, metal alloy (all metal), miracle mix, periosteal elevator, probe (straight), retractor - micro tissue forceps gerald, retractor - langenback , splinting wire , tissue forcep babcock, tweezer, allis tissue holding forceps, backhaus towel clamp, bone chisel, bone file, bone mallet, bone ronguer, bp apparatus, bp blade 11, bp blade 12, bp blade 15, composite grinding and polishing kit //bid details 2 / 135

State Government

CTN :45483929

17 Jun, 2026 49.70 Lacs

Gandhinagar - Gujarat

Tender For supply of different type of machine crushed black trap aggregate material from approved quarry to government hotmix plant site at chiloda. district gandhinagar.supply machine crushed b.t. stone aggregates 19.00 to 26.50 mm size kapchi of approved quality to government hot mix plant site at chiloda district gandhinagar..

State Government

CTN :45483931

17 Jun, 2026 49.15 Lacs

Gandhinagar - Gujarat

Tender For supply of different type of machine crushed black trap aggregate material from approved quarry to government hot mix plant site at chiloda. district gandhinagar.supply machine crushed b.t. stone aggregates 13.20 mm to 19.00 mm size of approved quality to government hot mix plant site at chiloda district gandhinagar.

Patching Compound Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others

State Government

State Government