Latest patient bed Tenders | Government patient bed Tenders

CTN :45275091

28 May, 2026 5.38 Lacs

Chandigarh - Chandigarh

Tender For providing & fixing of sanitary items and allied work in model jail sector- 51, u.t. chandigarh (fansi chakki, midday meal, music room) - excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10, all kinds of soil .2.10.1, pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : .4.1, 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4, 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and size in : .6.4, cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2, providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 300mm x 600mm) .8.31, providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868), transparent. .9.96, 250x16 mm .9.96.2, as per detail attached ., providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97, 200x10 mm .9.97.2, as per detail attached ., providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1, 125 mm .9.100.1, as per detail attached ., providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge: .10.14, profile b .10.14.1, fixing with adjustable lugs with split end tail to each jamb .10.14.1.1, providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. .11.56, polished granite stone slab of all colour and texture exceptblack,

CTN :43781155

27 May, 2026 6.40 Lacs

Vyara - Gujarat

Tender For bid to ras corrigendum : supply of patient bed (fowler) (q2)

State Government

CTN :45073459

27 May, 2026 NA

Karur - Tamil Nadu

Tender For corrigendum : dismantling, erection and testing of bed evaporator tubes, bed super heater coils and their clamps in power boiler4 at energy mechanical in tnpl unit i

Central Government/Public Sector

CTN :45277077

01 Jun, 2026 2.24 Crore

Multi City - Karnataka

Tender For supply of furnitures to 250 bedded hospital of vijayanagara district - crash cart(vij2026), iv drip stand(vij2026), semi fowler medical cot with mattress (for hdu/icu/ special wards)(vij2026), patient cots with mattresses(vij2026), bed side lockers(vij2026), bedside screen stand (for general) wards(vij2026), revolving stool (for patients)(vij2026), plastic chairs (for visitors and patients)(vij2026), cushion chair (for nursing station)(vij2026), almirah / big metal almirah/steel cupboard(vij2026), executive chair (for officers)(vij2026), examination couch (patient) bed with steps(vij2026), stretcher /patient shifting trolley(vij2026), dressing trolly(vij2026), steel director /metal rack storage(vij2026), five color coded foot operated bin with trolley(vij2026), three bucket mopping trolley(vij2026), linen trolley(vij2026), glass metal almirah/book shelf(vij2026), office tables with double drawers (for officers)(vij2026), department notice board (4ftx4ft) (wooden)(vij2026), rotating chair for other staff(vij2026), six step ladder(vij2026), visitors bench/stainless steel bench (at corridor)(vij2026), wheel chairs(vij2026), podium(vij2026), foot steps(vij2026), dust bin (big)(vij2026)

CTN :45292362

12 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of examination couch with screen curtains , stethoscopes adult and paediatric , bp apparatus adult and paediatric , pulse oximeter , weighing scale adult , weighing scale infant , measuring tape , penlight , tongue depressor , reflex hammer , otoscope , tuning forks , ecg machine , oxygen cylinder 10 litre with flow meter and both adult and paediatric , ambu bag adult and paediatric , suction machine manual electric , nebulizer machine , laryngoscope with blade , iv cannulas iv set , defibrillator , emergency crash cart with drugs like adrenaline , atropine and other imp meds , minor ot table , sterlizer autoclave or hot air oven , instrument tray , dressing drums , surgical instruments 20 pcs sets , arery forceps 2 pcs set , surgical scissors , needle holders , forceps toothed and non toothe set , suturing set f 14 pcs , bp cuffs for procedure , kidney traps , dressing materials gauze bandage and cotton , torniquet with double lock , splint , near and distant vision chart , colour vision chart , night vision chart led , delivery table , fetal doppler , neonatal resuscitation kit , radiant warmer , baby weighing scale , mucus sucker , cord clamp and cutting instruments , partograph charts , iud insertion kit set , microscope cbc check , haemoglobin meter , glucometer , urine analysis strip , centrifuge , slide staines 25 set for microscope , ice lined refrigetor , deep freezer , ice packs , auto disable syringe , hub cutter auto disable syringe machine , cold chain temperature log device , patient bed with mattress , bedside locker , iv stands , curtains , bedpans , online inverter with battery stands , 100 lph ro system , bio medicals dustbins coloured , sharp disposal container , gloves non sterile , gloves sterile pack of 10 , masks caps and gowns all medical grade , syringe different size pack of 10 , iv fluids sodium chloride saline , antiseptic 250 ml liquid type , emergenacy stretcher frame , portable cholesterol testing machine //bid details 2 / 59

CTN :45103081

25 May, 2026 NA

Palakkad - Kerala

Tender For corrigendum : supply of patient bed (fowler) (q2)

CTN :45103225

25 May, 2026 36.01 Lacs

Lucknow - Uttar Pradesh

Tender For corrigendum : supply of patient bed (fowler) (q2) , saline stand (v2) (q3)

CTN :45022049

12 May, 2026 NA

Multi City - Chhattisgarh

Tender For corrigendum : design, construction, testing, commissioning of all the components of interception and diversion based sewage treatment plant (stp) work including 05 years of operation and maintenance of the entire system.• survey, investigation, design and construction of various diversion drains of inner size 0.50m(w) x 0.50m(h) for a length of 10m, 1.00m(w) x 1.20m(h) for a length of 10m and 1.00m(w) x 1.00m(h) for a length of 210m• survey, investigation, design and construction of coarse, medium screen, grit chambers of various sizes as detailed in scope of work for each wet well.• design and construction of 3 no. wet wells with overhead pump house as per the technical specification• survey, investigation, design, supply, laying, jointing and construction of rising main (di-k9 pipe) of inner dia. 150 mm for a length of 950m and dia. 100 mm for a length of 100m• stp (2 nos) - designing (aesthetically), providing, and constructing and giving satisfactory trials of sewage treatment plant consisting of receiving chamber, screen chamber, grit chamber, measuring flume, distribution chamber with primary and secondary treatment, etc. as per the technical specification of capacity 0.50 mld of facultative aeration lagoon convensional technology including allied units for waste disposal with all civil and mechanical, electrical works involved including administration cum laboratory building of minimum carpet area of 800 sqft. complete with all electrical works.• design and construction of planted drying bed for co-treatment of faecal sludge - 4 nos. of size l- 5.00 x w- 2.00 x height as per design + free board 0.30)• boundary wall around entire stp area, internal and external electrification.• operation and maintenance (o&m) for the proposed works / entire sewerage system (proposed) for a period of 5 years after successful completion of trial run period or handing over whichever is later.

Corporations And Associations And Others

CTN :45224409

01 Jun, 2026 46.00 Lacs

Basti - Uttar Pradesh

Tender For supply of droni-massage table , nadi swedana yantra , foot stool , patient stool , arm chair , panchkarma accessories , shirodhara vessel , basti yantra , vamna set , kidney tray , male bed pan , nasya karma , stethoscope , sphygmomanometer , thermometer , pressure cooker , female bedpan , small pillow cover with rexin cover , almirah , clock , stop watch , gyser , exhaust fan , heating pan , heating facilities-room heater , autoclave equipment for sterilization , ksharsutra cabinet , autoclave , ot instruments -set , ot table , ot light , hot water bag , sims speculum , anterior veginal wall retractor , vulsellum , glass container 1l capacity , surgical table , surgical trolley , surgical tray , dressing tray with lid , allis forceps , artery forceps , magill forceps , disecting forceps , sponge holding forceps , outlet forceps , first aid kit , needles , scissor , agnikarma shalaka panch dhatu , shoulder pulley set , static cycle exerciser , dumbbell 2.5 kg , dumbbell 5kg , dumbbell 7.5kg , dumbbell 10 kg , dumbbell 15kg , leg exerciser , refrigerator , semi auto analyzer , auto clave , test tube , haemoglobinometer with 1000 hemobloginstrips, 1000 lancet and lancet devices , glucometer with 2000 glucostrips, 2000 lancet and lancet devices , urinometer , colour coded dustbin , xray view box , phototherapy set , office chair , almirah for medicine , attendants chairs , doctor stool , rack , dustbin , patient bed , tables ) /bid number : gem/2026/b/7502766 * /dated: 16-05-2026 & & / bid document 1 / 56

CTN :45226495

05 Jun, 2026 NA

Patna - Bihar

Tender For supply of patient bed (fowler) (q2)

Patient Bed Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Corporations And Associations And Others