Latest paver block laying Tenders | Government paver block laying Tenders

Central Government/Public Sector

CTN :40330612

11 Jun, 2025 37.97 Lacs

Faizabad - Uttar Pradesh

Tender For corrigendum : tender for supply of supply of bakelite sheet with 1nos of 6a dp mcb and stud type connector suitable for 4cx 6sq mm cable complete as required. , supply of 25w led street light luminiare with pre die cast aluminium housing and ip 66 protection , pf greater than equal to 0.95 , thd less than 10 percent , cri greater than equal to 70 as per technical specification complete as required. , supply of lt power cable of 1.1 kv grade of following sizes aluminium conductor xlpe insulated pvc sheathed armoured cable confirming to is 7098 part-i-1988 with upto date ammendment as required. a) 3.5 c x 95 sq. mm , supply of lt power cable of 1.1 kv grade of following sizes 4c x 6sq.mm(copper conductor) , supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket , bend , couplers etc. conforming to is 14930 , part ii complete with fitting and cutting , jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. a) 63 mm dia (od-63 mm & id-50 mm nominal) , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. a) above 35sq.mm and up to 95 sq mm , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. b) up to 35 sq mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. a) 3.5c x 95 sq.mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. b) 4c x 6sq.mm(copper conductor) , itc of gi octagonal pole of following length in reinforced cement concrete 1 ratio 2 ratio 4 (1 cement 2 coarse sand 4 stone aggregate 40mm nominal size) foundation i/c excavation and refilling etc. complete as required a) 5 mtr. height , itc of 30w led street light luminiare on existing pole bracket i/c connection with 1.5sq.mm frls copper wire complete as required. , earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. , providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut , bolt , spring , washer excavation and re-filling etc. as required. , earthing with g.i. earth pipe 4.5 metre long , 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. , providing and laying earth connections , from earth electrode with 6 swg dia , g.i wire in 15mm dia , g.i pipe from earth electrode including connection with g.i. thimble excavation and re-filling as required. , providing and fixing 6 swg g.i. wire on surface or in recess for loop earthing alongwith the existing cable as required. , design , fabrication , supply , installation , testing & commissioning of outdoor feeder pillar , cubicle type , made out of 2 mm thick crca sheet , totally enclosed , ip 55 , free standing , floor mounting , dust and vermin proof , indoor , compartmentalised , suitable for operation on 3 phase and neutral , 415 v , 50 hz ac system , including internal wiring with suitable size wires/cable , interconnection , duly powder coated painting etc. , including supply & installation of following switchgears , metering instruments and accessories in the feeder pillar as required as per attached boq in atc , shifting of 5 mtr height str

corporations/Associations/Others

CTN :40565499

09 Jun, 2025 55.00 Lacs

Ahmedabad - Gujarat

Tender For rcc road and paver block laying work in shahvadi, ranipurgam, motipura gam, lambha gam, laxmipuragam and various other areas in lambha ward of south zone

corporations/Associations/Others

CTN :40565560

09 Jun, 2025 99.00 Lacs

Ahmedabad - Gujarat

Tender For rcc road and paver block laying work in kamodgam,saijpur-gopalpurgam ,piplajgam ,gyaspurgam and various other areas in lambha ward ofsouth zone

CTN :40188524

04 Jun, 2025 2.89 Lacs

Agra - Uttar Pradesh

Tender For bid to ras custom bid for services-emergency repair/ replacement of header in kb line pump house under age e/m (west) of ge (west) agra-1 taking down supplying, fixing, testing and commission of ms header made out of heavy duty erw pipe of size 300 mm dia with end plates of 6 mtrs length with inlet connection 200 mm dia03 , and outlet connection 150 mm dia -03 nos on pcc pillars complete all as specified and directed. note:- all accessories like all fittings ( standard ms fittings with welded joint shall be used on the pipes) including tees, elbows, d-joint, reducer, union , flanges, rubber gaskets, gi nuts bolts, washer, including supporting/ fixing the pipe on floor/wall/ ceiling with clamps, hangers, angles with clamps, hangers, angles as per specification complete with two or more coats of synthetic enamel paint of approved make/ shade over one coat primer complete. 01 job 2 taking down and s&f ms pipe erw steel including specials, nominal 300 mm dia as per is 3589 (1981) thickness 5.4 mm. 3 taking down & s&f ms pipe erw steel including specials, nominal 200 mm dia as per is 3589 (1981) thickness 5.4 mm. 4 taking down & s&f ms pipe erw steel including specials, nominal 150 mm dia as per is 3589 (1981) thickness 5.4 mm. 5 taking down & supply, laying and jointing for the 100 mm bore on floor/wall, galvanized steel tubing medium grade including isi marked gi fittings, including cutting to reducing length, screwing and connecting with existing line including fix existing connection with required size of tee or ms clamp complete all as specified and directed 6 taking down & supply, laying and jointing for the 80 mm bore on floor/wall, galvanized steel tubing medium grade including isi marked gi fittings, including cutting to reducing length, screwing and connecting with existing line including fix existing connection with required size of tee or ms clamp complete all as specified and directed. 7 s&f in replacement 200 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 8 s&f in replacement 150 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 9 s&f in replacement 100 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 10 s&f in replacement 80 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 11 m&l for rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 complete all as specified and directed. 12 excavation with the help of jcb and labour charges.

CTN :40572426

05 Jul, 2025 38.00 Lacs

Sagar - Madhya Pradesh

Tender For inviting rates for construction material supply for financial year 2025-26 - inviting rates for construction material supply for financial year 2025-26, boulder with spreading 0.75 to 20 c.m., fata with spreading rubble stone, soft murrom with spreading, hard murrom with spreading, bajra with spreading, course sand sand, fine sand barman sand, crusher stone duststone dust, 06 mm metal crushed. metal, 12 mm metal crushed. metal, 20 mm metal crushed. metal, 40 mm metal crushed. metal, 90 mm metal crushed. metal, flag stone 50 mm to 100 mm thick flag stone, flag stone 150 mm to 200 mm thick dasa, bricks (fly ash)8 x 4 x 4, bricks (local)9 x 4 x 3, half round r.c.c. pipe150mm dian.p.-2, half round r.c.c. pipe250 mm dian.p.-2, half round r.c.c. pipe300 mm dian.p.-2, half round r.c.c. pipe450 mm dian.p.-2, r.c.c. hume pipe300 mm dian.p.-3, r.c.c. hume pipe450 mm dian.p.-3, r.c.c. hume pipe600 mm dian.p.-3, r.c.c. hume pipe1000 mm dian.p.-3, r.c.c. hume pipe1200 mm dian.p.-3, r.c.c. cement pole2.40 m hight, r.c.c. cement pole3.0 m hight, barbed wire steel9.38 k.g. per 100r. m., wire mesh (steel)50x50 mm strengthing 4mm with nut bolt baser, angle iron all size mild steel, steel bar all size up to 25 mmmild & torsteel, winding wire, stainless steel febrication work with fixing labour charge, steel door & windows with all fittingsangel iron 30x30x5 mm flat iron 25x5 mm sheet 18 gauge, collapsible shutter with all fitting (steel), iron chamber/drain grill (complete spot fitting with labour), corrogated g.i. sheet0.63 mm0.63 mm, cement p.p.c. isi markisi mark 50kg beg, cement o.p.c. isi markisi mark 50kg beg, centring shutering with fitting and cartling below plinth level, centring/shutring with fitting & cartingabove plinth level, putty double coat with finishinglabour, roller machine with diesel & operetor, 16 to 18 mm thik plan white marble/green marble/zebra black marble/red marble, 25mm thick kota stone, 16 to 18 mm thick granite stone of any colour and shade, vetrified tiles60 x 60 cm 10mm thick 15:15622, glazed tiles300 x 300 mm 10 mm thick 15:15622, tiles / marble fitting labour charge, pvc floor carpet, w.c. 580 x 440 mm with footrest & p-trap with fittingodisa petarn, w.c. european type with fittingisi marked white solid plastic seat and lideuropean type, w.c. european type with fittingisi marked black solid plastic seat and lideuropean type, chequr tiles with fitting18 to 20mm thick ordnory cement, m.s. tube steel frame febrication work including all fitting labour charge, m.s. angle steel frame febrication work including all fitting labour charge, providing and laying cement concrete m20 grade work with required & equipmentlabour, aluminium fram work complete (glass/acp sheet/grill), hydra machine, poclain machine, water proofing treatment on roofs of slab by cement slurry mixed with water proofing compound complete, wall painting with plastic emulsion paint of approved paint, removing white or colour wash by scrapping and sand papering complete, distempring with oil bound distamper water proof paint complete, repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq mm including cutting the patches in propper shape, providing & fixing granite bhumipujan / lokarpan patthar with photo and writing work complete, providing and fixing on wall wallpaper complete, providing and fixing 12 mm toughened glass with accessories labour fitting complete, providing ply 19 mm thick, providing and fixing mica sheet complete, providing carpentar for furniture work, providing and fixing 60 mm thick paver block 30 n/sqmm, brick masonary work with open bhatta complete, statue colour paint complete, water proofing treatment on roofs of slab by asian paint, indigo, etc with water proofing compound 3 layer with crakseal, putty, labuar complete, pvc pipe 3 inch dia 4kg/cm2, marble chips flooring completed work with material labour, pvc pipe 3 inch dia 4kg/cm2 elvo

Corporations/Associations/Others

CTN :40555201

13 Jun, 2025 8.47 Lacs

Nanjangud - Karnataka

Tender For construction of compund and work of concrete cement for the floor around sri siddappaji temple beside okkalageri at ward no 03 in nanjangud cmc limit (reserved for 2a contractors)

State Government

CTN :40557204

14 Jun, 2025 NA

Amravati - Maharashtra

Tender For supply of red or , filling in plinth and floors with contractors material or brought from outside and approved by engineer incharge , providing and fixing country cut teak wood double or single leaf second class fully panelled door shutter , providing and fixing partitions made up of cctw frame of size 75 mm x 50 mm at 60 cm , library area table providing and fixing of free standing table at 1350lx750dx 750ht , providing and arrangemnt of mid back, normal syncro mechanism , fixed armrest , gaslift for seat height adjustment, standard 5 prong or nylon base with leather upholstery , free standing table at 1500lx600dx750ht providing and fixing table of size 1500 x 600 x 750 mm. , toughened glass 12 mm , conference table at 3600lx1400dx750ht providing and fixing of main table made up of 18plus18mm thick mdf top with pvc membrane finish and waterfall edge profile. , providing and arrangemnt of high back, synchronized mechanism with multiple locking, adjustable armrest, , supplying and fixing samsung led backlit lcd 55 3840x2160 uhd smart tv,tizen os mount type both table , providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour , providing and fixing rollar blinds ami make or approved make and shade of 38mm round aluminium channel with blackout fabric , providing and laying antiskid ceramic tiles of approved quality of size 30 cm x 30 cm , providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding i.s. for dado and skirting in required position , providing and fixing on walls or ceiling or floor 15 mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion , providing and fixing on walls or ceiling or floor 25 mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion , providing and fixing on walls or ceiling or floor 40 mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion , providing and fixing c.p. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange , providing and fixing 450mm x 550mm size superior type belgium mirror with 16mm dia. nickel plated towel rod , providing and fixing 100 mm dia stabiliser pipe or p.v.c. soil vent or waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps , providing and fixing white european type wall hung pan, of size 350mm x 355mm x 570 mm concealed flush tank with floor mounting frame , providing and constructing brick masonry inspection chamber 90cm x 45cm x 90cm , providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber , sliding window 3 track 2 glass shutter plus 1 flymesh of approved make with dgu, providing and fixing of sliding , carpenter i class skilled , providing and fixing table top white wash basin of size 120x635x405mm rubber plugs and brass chain

corporations/Associations/Others

CTN :40520490

09 Jun, 2025 50.00 Lacs

Ahmedabad - Gujarat

Tender For rcc road and paver block laying work in narolgam chunaravas, vanjaravas and various other area in lambha ward of south zone

CTN :40522831

18 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of surface dressing n exc 15 cm deepin hard oblique dense soil , excavating over areas not exceeding 1 point 5 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 1 point 5 m deep not exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed. , returning filling in including spreading and levelling and watering and well ramming in layers not exceeding 25 cm each , removing excavated material n exc 50m and depositing where directed at a level n exc 1 point 5 m above the starting point , m and l for hard core of gauge n exc 63 mm and deposeted and spread and levelled in layers n exc 15 cm thick and watered and rammed to a true surface complete all as specified and as directed , m and l cement concrete in fdn and 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate in sub base of flooring complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 20 mm graded aggregate complete all as specified and as directed , m and l for rcc m30 reinforced cement concete design mix in foundation including rafts and footing and foundation beams and bases for column and etc basement slabs under reamed piles , m and l for mild steel tmt bar 10 mm dia and over cut to length and bent to shape required , m and l for mild steel tmt bar 8 mmn dia and overm cut to length and bent to shape required , m and l formwork to sides of rough finished flat surface of concrete foundations and footings and bases of colums and raft and raft beams and sides and sffits , m and l formwork to rough finished flat surface soffits of suspended slabs such as roof slabs and floor slabs and landing and similar work not exceeding 200mm thick horizontal or sloping all , m and l formwork to rough finished flat surface in sides and soffits of floor or roof beams and beam haunchings and girders and bressummers , formwork to faces of walls and retaining walls and butments and parapets and staircase railings and similar work including attached pillasters and buttresses , m and l formwork to edges of rough finished surfaces of concrete flats and trends and breaks in floors windows cills and concrete railing and openings in concrete walls and floor and roofs , m and l liquid water proofing compund , m and l for verified ceramic wall tiles light shade 10 mm thick square oblique rectangular polished and area of each tiles not exceeding zero point 36 sqm and in floors , m and l for verified ceramic non skid tiles light shade 10 mm thick square rectangular polished and area of each tiles not exceeding zero point 36 sqm , m and l for screed bed or bedding laver of mortar 15 mm thick for laying floor finished complete all as specified and as directed , m and l rendering 15 mm thick on wall on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick on ceiling on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick in on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed , m and l for preparation of wall surfaces including priming coat and wall care putty and applying two coats of distemper oil emulsion , m and l for preparing new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed , s and f anodised aluminium window and ventilator shutters and side hung type without sash bars and al

CTN :40418443

02 Jun, 2025 11.82 Lacs

Multi City - Karnataka

Tender For corrigendum : supply of matrials to constraction katageri nrlm shed - broken stone aggregate 40 mm size (kat01), broken stone aggregate 20 mm size (kat01), broken stone aggregate 12 mm to 10 mm size(kat01), coarse sand (zone iii) (kat01), portland cement (kat01), mixer (concrete) - 1 cum capacity (kat01), add watering charges at 1 percentage on material (kat01), add sundries charges at 1 percentage on material (kat01), transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution. (kat01), granite/trap broken metal 100 mm and down size (kat01), plasticizer / super plasticizer (kat01), hom of vibrator 0.71 days (kat01), tmt bars fe 500 (kat01), binding wire (kat01), size stone 20 x 20 x 25 cms (kat01), bond stone 20 x 20 x 45 cm (kat01), boulders (kat01), mixer (concrete small used in culvert) (kat01), mason class i (with tools) (kat01), mason class ii (with tools) (kat01), stone chistler class ii (kat01), add sundries charges at 1 percentage on labour (kat01), add watering charges at 1 percentage on labour (kat01), silver oak or equivalent planks 38 mm thick (kat01), casurina poles 100 - 150 mm (kat01), add handling , loading and unloading at 2 percentage on material (kat01), add sundries charges at 2 percentage on material (kat01), casurina poles 75 - 100 mm dia (kat01), jungle wood runners and planks (kat01), solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm (kat01), add handling , loading and unloading at 1 percentage on material (kat01), solid concrete blocks (40x10x20 cms)-4.00 n/sqmm (kat01), add providing and removing scaffolding at 3 percentage on labour (kat01), vitrified tiles 600x600 mm (kat01), mathi/nandi wood planks for panels 25 mm thick (kat01), add cutting and other wastage 5 percentage (kat01), hom of machinaries for planing (kat01), mathi/nandi wood scantling (kat01), unit cost as per the specification (kat01), m.s rods (kat01), ms flat (kat01), fitter class i (kat01), welder grade i (kat01), add hom of welding and grinding machine at 4 percentage on material (kat01), ready mix primer paint (ready mix red lead paint) (kat01), add wire brush, fine steel wool, putty, sand paper, at 3 percentage on cost of paint (kat01), painter class i (kat01), enamel metal paint (kat01), add brush at 1 percentage on cost of paint (kat01), ceramic tiles 30 x 30 cms (kat01), white cement (kat01), plastic emulsion paint (kat01), add brush, putty, sand paper, roller at 5 percentage on cost of paint (kat01), water proofing cement paint (kat01), add brush, putty, sand paper at 2percentage on cost of paint (kat01), liquid wood filler (kat01), add brush, putty, sand paper at 5 percentage on cost of paint (kat01), enamel paint (kat01), polyenthylene water storage tank of specified capacity l (kat01), labour charges for lifting and placing in position and making connection at 7 percentage on material (kat01), handling loading and unloading 3 percentage on material (kat01), indian type water closet of size 580 mm of specified make with footrests (kat01), a 100mm s or p trap (kat01), add white lead paint, gasket, cement, sand for making good the wall and floor at 2 percentage on material (kat01), add cement sand and grit 1 percentage on material (kat01), licenced plumber with tools (kat01), add 5 percentage for fittings and wastage charges (kat01), polythylene pipes high density 25mm external dia (kat01), cost of 6.5mm m.s. coil (kat01), fabrication charges. (kat01), labour charges for handing errection of rcc rings etc. at 5 percentage (kat01), transportation charges of materials beyond 5 km at 10 percentage (kat01), rcc cap 1000 mm dia, 100 mm thick (kat01), pvc pipe of 10kg/cum,90 mm (kat01)

Paver Block Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Corporations/Associations/Others

State Government

corporations/Associations/Others