Latest paving work Tenders | Government paving work Tenders

CTN :45700481

03 Jul, 2026 3.38 Crore

Jabalpur - Madhya Pradesh

Tender For installation of fountain workand end to end paving work at major rotary /parks under ncap.

CTN :45725036

14 Jul, 2026 8.64 Lacs

Bellary - Karnataka

Tender For concrete paving work at metro park amardeep d. dhanarati house to manjunath bellary house in ward no. 40, hubballi

CTN :45724472

14 Jul, 2026 21.34 Lacs

Multi City - Karnataka

Tender For concrete paving work at metro park shrinivas chawhan house to ratan sing lamani house in ward no. 40, hubballi

CTN :45701630

15 Jul, 2026 NA

Bagasara - Gujarat

Tender For block paving work near public plot in meghaninagar street no.-4

corporations/Associations/Others

CTN :45192882

01 Jul, 2026 45.00 Lacs

Jalore - Rajasthan

Tender For corrigendum : construction of store shed, tulpf paving work at sub division store premises at jeewana.

CTN :45622504

25 Jun, 2026 10.24 Lacs

Agra - Uttar Pradesh

Tender For tajganj zone, room no. 70 paving work using interlocking tiles on the side berm from narottam kunj, madhunagar to phulbagh.

State Government

CTN :45595794

08 Jul, 2026 9.94 Lacs

Doda - Jammu And Kashmir

Tender For repair and renovation of hospital at base camp including procurement of lab instruments chanderkote. - demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of engineer-in charge:1:3:6 or richer mix (i/c equivalent design mix), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), providing upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 fine sand), providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. in colour such as white, ivory, grey, fume red brown, providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm, providing and fixing ply wood 5 ply with commercial ply on both faces 6 mm thick, dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : upto 10 mm thick, providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. second class kail wood., providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :budloo / fir wood., providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. first class kail wood 30mm, providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 2nd class teak wood beading 62x19 mm, providing and fixing aluminum tower bolts isi marked anodized (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10mm, providing and fixing aluminum handles isi marked anodized (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 liter low level white p.v.c. flushing cistern,

CTN :45584909

30 Jun, 2026 45.00 Lacs

Jodhpur - Rajasthan

Tender For supply of various material and equipment at gram panchyat ps dhawa 2026-27 yearly rate contract - ghadla/kankar/jhajhra, mud mortar, quicklime (from kiln) for lime masonry work, cement, ppc, white cement, fine aggregate, sand/gravel, gravel – local, fly ash, surkhi (brick dust/powder), stone dust (for masonry work), stone/brick aggregate (for works other than road construction), 40mm stone aggregate (hand-broken grit) (deduct 1/11 for voids), 40mm stone aggregate (crusher-broken) (deduct 1/11 for voids), 20mm stone aggregate (crusher-broken), 12/10/6mm stone aggregate (crusher-broken), brick aggregate, materials for road work, 63-40mm hand-broken stone aggregate (deduct 1/11 for voids), 90-45mm hand-broken stone aggregate, quarry rubbish (deduct 1/6 for voids), gravel (deduct 1/6 for voids), kankar (deduct 1/11 for voids), binding material (pi 4-6) (deduct 1/6 for voids), brick (22.5 x 11 x 7.50 cm), first class, second class, soling / stone paving stone, random rubble (rr) masonry, coursed rubble (cr) masonry, stone soling (for flooring work up to 15 cm height), stone soling (for road/paving work, 23 cm height), jodhpur-type stone slab/strip/flagstone pieces (width 10-12", length 2-3', thickness 2.5-3.5"), stone slab/flake (flaky material) (3-4" thickness & length, 1-2" width) for soling, sandstone (dpc, sill, coping, lintel, shelf/tand, almirah, etc.), up to 25 mm thickness, 25-40 mm thickness, 40-50 mm thickness, 50-75 mm thickness, 75-100 mm thickness, 100-150 mm thickness, flagstone for flooring / slab paving, flagstone for flooring (up to 35 mm thick, min. 3 sq. ft. or more area) - jodhpur slab, flagstone for slab paving (60-75 mm thickness, min.) area of 3 sq. ft. or more (jodhpur chap), unpolished rough kota stone, up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, polished kota stone (single-side polished), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, marble stone (makrana adanga, 20mm thick), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, marble chips, marble powder, marble stone (rajnagar grade ii/local, 20mm thick), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, stone door frame, single rebate size 100 x 75 mm, double rebate size 125 x 75 mm stone slabs, up to 1.5 m length, minimum 40 mm thick, 1.5 m to 2.40 m length, minimum 50 mm thick, 2.4 m to 3.0 m length, minimum 65 mm thick, above 3.0 m length, minimum 75 mm thick, precast tiles / blocks, glazed: size 30x45 cm, mosaic: 40 mm thick, vitrified: size 60x60 cm, interlocking tiles/bricks/blocks for road work, cement interlocking block (m-30 grade), 60 mm thick, cement interlocking block (m-30 grade), 80 mm thick, cement interlocking block (m-30 grade), 100 mm thick, local wood with fittings (for doors, windows, and furniture), mango, mirandi/kapoor, babool, others: ghana teak, factory-made doors (30 mm thick, solid core, single leaf), structural steel, iron (tor steel fe 415/500 for reinforcement), binding wire (18 gauge), iron girders, angle iron/square bar/flat strip/angle iron, barbed wire (sizes: 12g wire & 12g strand / 12g wire & 14g strand / 14g), mesh/jali, iron mesh (24 gauge, 14 mesh), cement concrete jali (40 mm thick), glass, 3 mm thick glass, paints, enamel paint, distemper, lime - for whitewashing (aras / quicklime), primer, petroleum products, diesel (hsd), mobil oil (engine oil), bitumen/shalitex board, plain sheet sheets, gi sheet 22 gauge (0.80 mm), gi sheet 24 gauge (0.63 mm), ms sheet 22 gauge (0.80 mm), ms sheet 24 gauge (0.80 mm), corrugated sheet, gi sheet 1 mm thick, gi sheet 22 gauge (0.80 mm), asbestos cement sheet 6 mm (2.5/2.75 x 1 m), other sheets, pvc sheet 1 mm thick (colored/plain), green-yellow 'lite-roof expo' sheet (183 x 90), pipes, gi 15 mm diameter (b class), gi 20 mm diameter (b class), gi 25 mm diameter (b class), ac 75 mm diameter, ac 100 mm diameter, pvc 90 mm diameter (with ring), pvc 110 mm diameter (with ring), pvc 140 mm diameter (with ring), pvc 110 mm (2.5 kg/sq. cm