Pcc Bench Tenders

Get complete information related to latest Pcc Bench Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pcc Bench Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pcc Bench Tenders .

Filter

Loading....

Get Tender in Email

CTN :40563355

05 Jun, 2025 8.19 Crore

Tikari - Bihar

Tender For state scheme (nabard) /25-26/tikari /01 - 1) name of work: construction of high level rcc bridge over morahar river in between mahiyarpur to kurmawaan, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diasmeter all complete job as per specifiactions and direction of e/l, providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 .all complete job as per design upto 5 m height, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications. elastomeric bearing & pad, providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :--furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach s

CTN :40563359

05 Jun, 2025 5.77 Crore

Jhanjharpur - Bihar

Tender For state scheme (nabard)/25-26/jhanjharpur/01 - 1) construction of hl rcc bridge in karhara to malleh road over bhutia balan river-ch-2.10 km, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diameter. all complete job as per specifications and direction of e/i., providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m-30 mechanically mixed concrete in sub structure with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design upto 5 m hieght, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :-- furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach slab:-- reinforced cement concrete approach slab including

State Government

CTN :36800624

25 Jul, 2024 1.30 Crore

Nagaur - Rajasthan

Tender For matarial supply for nrega scheme and other - p.p.c., white cement, fine prechiger, rail/gravel, gravel local, ballast stone brick for other than road work, 400mm measurement hand broken sit boids cart 1/11), 400mm stone broken boids cart 1/11, amin stone broken boids cart 12/10/6 tikesher, samyo for road work, 63-40mm stone broken boids cart 1/11, 63-40mm hand broken stone road boil cut 1/11, 90-45mm. hand broken stone aggregate, kori ravish boyce cart 1/6), yevla boids cut 1/6), binding samayi 14-6) (dal cut 1/, brick (22.5117.50 cm), first class (stassi, second class, solin khareja chilai stone, masonry bera (, masonry ratha (chi, baranja soling (for digging work upto 15cm height), baranja soling (for road paving work 23cm height), arch width of sheet 10-12 length 2-3 morai 2.5-357, stone sheet (flaky materia(3-4" thick & length, 1-2" width, sandstina dpc, sl, coping lintel, tand almira et, 250mm thickness upto 25-40mm thickness, upto 40-50mm thickness, upto 2300 sq. cm, polished kota stone one side side, upto 1000 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble stone carving mirror 20mm thick, upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble chips, marble powder, marble stone (rajasthani 20mm thick), upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, stone grate, single pail 100 x 75 mm, double pail 125 x 75 mm., stone pail, upto 1.5 m length, minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , 2.4 m to 3.0 m length, minimum 65mm thick , above 3.0 in length, minimum 75mm thick , precast tiles/rocks , glazed su-30x45 cm , verified size-60x60 cm , interlock tiles/b rick/block for road work , cement interlocking block m-30grade, 80mm thick , fittings with local cash. for doors, windows and furniture), others / teak, factory made doors (30 mm thick, solid and single sheet), structural steel, iron (tor steel fo-415/500 for reinforcement, widing via 18 gauge, iron girders, conia iron square green/leaf angle aman, jage wine and 14 quaestrad/34 jani, barbed iron lar size 12 guage wire and 12 guage strad/12, iron mesh (24 gauge, 14 mesh, module gi box, 2 for soil, 3 for module, module base and cover plate, 2 for module, 3 for module, modular swaying in, 15 marked, sp 5/6 ampere, sp 15/16 ampere, modular circuit outlet, marked, 6 pin 15/16 amp, steel fastener 5 mm 75 mm, scb db, 2+2 way, spn, single door, 2-4 in, spn, single door, 2+6 in, spn, single door, gi pipe (medium thickness., 15.00 mm dia, 40.00 mm dia, copper wire 8 swg (4.00 mm dia) (0.117 kya/m), ci/ms cover plate attached to frame with locking arrangement, pvc water tank body cover (as per 15:12701-1989, diesel road roller 8 to 10 ton, tractor (25-40 hp), tractor trolley, tractor water tanker samta 4000 liter weight, cement ket mixer 5-7 cubic feet, pumping set 15 hp, niddle/plate better mm operator, -grinding machine with operator big, motor i.e.), compressor, hydraulic excavater/cb (bucket capacity 0.4cum), scraper, shuttering ply with beam and other material, shuttering ply with batti and other material, shuttering nohe plate with batti and other material

Loading, Please wait...

Pcc Bench Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government