Latest pcc work Tenders | Government pcc work Tenders

State Government

CTN :45313816

01 Jun, 2026 11.69 Lacs

Delhi - Delhi

Tender For maintenance of completed scheme finishing and furnishing vikas sadan

State Government

CTN :45290039

01 Jun, 2026 1.72 Lacs

Rohtak - Haryana

Tender For job no.1245/2026 (hew) work for repairing of children playing equipment and distempering on mature tree plants and providing and fixing of garden iron bench in pt. shri ram sharma park sector-13 at u/e rohtak with 06 months defect liability period - 11.66.1 interior finishing distempering with 1st quality acrylic distemper, having voc (volatile organic compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 1 one coat, 26.58.3 supply and installation of garden bench 3 cast iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. seat and back shall be made of 10 strips of m.s. pipes 63 mm x 25 mm of 14 gauge with one m.s. flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. spray painted with approved brand paint. fixed by grouting with 1:2:4 cement concrete (minimum weight of each bench 105 kg). all materials required to be as per bis specifications., job work repair of children playing equipments. , job work repair of sea saw , job work repair of bridge ladder. , job work multiplay station repairing welding and new plastic slide and top roof fiber shade any colour.

Central Government / Public Sector

CTN :45076868

02 Jun, 2026 NA

Belgaum - Karnataka

Tender For corrigendum : supply of thinner f/enamel paint , two pack aliphatic acrylic polyurethane finish paint off white , zinc ethyl silicate primer is 14946: 2001 , two pack epoxy polyamide mio undercoat , enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 , ready mixed paint, air drying, red oxide - zinc phosphate, priming as per is 12744

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

corporations/Associations/Others

CTN :45294905

03 Jun, 2026 2.97 Lacs

Kolkata - West Bengal

Tender For supply and installation of various electrical equipments in place of burn out and damaged ones at different panels and allied works at shanagar burning ghat. - supply and delivery of mccbs with thermal magnetic release breaking capacity thermal release rang 125-160a, breaking capacity icu at 415v ac, 50hz, 50ka4pole , supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range: 24-40, mn2, , power contactors: supply and fixing the power contactor t.p 70a, l & t make (ml-4) having 240v, 50hz, coil incl. 2 no + 2 nc aux contact block., , power contactors: supply and fixing the power contactor t.p 16a, l & t make having 240v, 50hz, coil incl. 1no+1nc aux contact block., , supply & fixing of 415/440 volt, hrc fuse (make: l&t/havels/cgl/ge).for 250 amp supply and fixing of analog ammeter ranging 0-100amps having c.r ratio of 100/5a, 144 mm sq size (make: ae/kappa/mp)., , supply and fixing of analog voltmeter ranging from 0-500 v of 144 mm sq size (make: αε/καрралмр)., , supplying and fixing 415v, tpn sfu open execution in existing ss enclosure/cubical with nuts bolts etc incl. s & f 3 nos. din type hrc fuse as per rating. 125a siemens, , supplying and fixing 240/415 v mcb of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection legrand 63 a fp, , supplying of 1.1 kv. grade pvc insulated conductor of following cables (make: polycab/gloster/havells/):size in sq. mm, no & dia. of wire in mm, no of core - 4 1/2.24 3, , annexure - i basic rate of materials: (all rates of materials from k-1 to k-14 are excluding vat) 70.1.5 sq.mm 'fr' stranded copper wire, , compression glands.supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture(proof entry of xlpe/pvc armoured cables as below: for, , 3 core.(i)upto 4 sqmm, , finishing cable ends.(b)finishing the end of following xlpe/pvc, , armoured cables by crimping method incl. supplying and fixing solderless socket (dowels make), tapes, anticorrosive paste & jointing materials. (ii) 2 core 6 sqmm cable, , temperature controller: a) supply and fixing the digital type temperature controller of range (0-1200) deg. c of overall dimension 92 sq mm dia x 105mm depth having (cr-a1) heat sensor and 1 no + 1 n.c change over contact to be actuated at crossed of desired temperature in deg.c complete power supply unit of 230v 50 hz., , blue max make

Central Government/Public Sector

CTN :45321128

05 Jun, 2026 NA

Multi City - Multi State

Tender For finishing stickers;2 items

State Government

CTN :45198711

28 May, 2026 45.0 Thousand

Noida - Uttar Pradesh

Tender For corrigendum : supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , ready mixed paint, air drying, red oxide zinc chrome, priming (v2) as per is 2074 (q3)

State Government

CTN :45311997

03 Jun, 2026 14.00 Lacs

Udaipur - Rajasthan

Tender For miscellaneous finishing work at vc residence, mlsu

State Government

CTN :45308147

03 Jun, 2026 14.00 Lacs

Udaipur - Rajasthan

Tender For miscellaneous finishing work at vc residence, mlsu

CTN :45318020

08 Jun, 2026 NA

Khurda - Odisha

Tender For supply of modification of existing wooden tables including cutting resizing strengthening fixing alignment and finishing , providing and pasting decorative printed stickers on the front side of tables including surface cleaning and smooth application , and providing fixing wooden platform of size 08 ft x 04 ft x 01 ft made of seasoned wood with proper framework , providing and pasting approved quantity sunmica laminate on wooden platform including adhesive edge finishing and cleaning , general wooden work carpenter labour tool and finishing including hardware

Pcc Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors