Latest pcr equipment Tenders | Government pcr equipment Tenders

Central Government/Public Sector

CTN :45545879

18 Jun, 2026 NA

Multi City - Multi State

Tender For supply of brass sieve set of size 10 mm, 6.3 mm or 5.0 mm, 5.6 mm, 4.75 mm, 4 mm, 1 mm, 0.5 mm& 0.106 mm, for sieve analysis of miscellaneous consumables like hddrm, dolomite, graphite powder etc. . the sieves should be of brass frame, of 200 mm diameter and 50 mm height., should meet the requirement of is- 410 part 1. the calibration certificate for size conformity to be obtained from a nabl approved laboratory with scope for the same. sieves should be of minimum 0.6 mm thickness gauge, and a minimum weight of 320 gms each. brass sieves should be without any joint machine made, uniformly fabricated with ss cloth, individually packed in printed cardboard boxes. warranty-1 year. the whole sieve set will be rejected even if a single sieve is not meeting the above requirement. if any sieve is damaged within warranty period, the supplier has to replace the same, on no payment basis. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45545922

18 Jun, 2026 NA

Multi City - Multi State

Tender For supply of brass sieve set of size astm 8, 10, 12, 14, 16, pan with lid (lid should be with ring and not head)., for steel shots sieve analysis. the sieves should be of brass frame, of 200 mm diameter and 50 mmheight., should meet the requirement of is- 410 part 1. the calibration certificate for size conformity to be obtained from a nabl approved laboratory with scope for the same. sieves should be of minimum 0.6 mmthickness gauge, and a minimum weight of 320 gms each. brass sieves should be without any joint machine made, uniformly fabricated with ss cloth, individually packed in printed cardboard boxes. warranty-1 year. the whole sieve set will be rejected even if a single sieve is not meeting the above requirement. if any sieve is damaged within warranty period, the supplier has to replace the same, on no payment basis. [ warranty period: 12 months after the date of delivery ] ]

State Government

CTN :45532791

19 Jun, 2026 5.52 Lacs

Jhargram - West Bengal

Tender For verification of weighbridges (calibration, certification and renewal of weighing machine) including repair, annual maintenance contract, replacement of damage spare parts of jhargram k.b, binpur-i and binpur-ii k.b kharikamathani k.b

CTN :45512469

22 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For tender for calibration of rubber tensile testing machine , calibration of spring testing machine , calibration of shore hardness a , calibration of shore hardness d , calibration of vickers hardness testing machine , calibration of digital hardness testing machine , calibration of weighing machine afcoset , calibration of weighing machine scale tech

CTN :45260024

17 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : providing of calibration services - calibration of multi sensor 3d coordinate measuring machine- o inspect plus (vmm) for 3 years; as per scope of work; any other government approved labs / service provider; buyer premises (onsite),calibration services - calibration of multi sensor 3d coordinate measuring machine- o inspect plus (vmm) for 3 years; as per scope of work; any other government approved labs / service provider; buyer premises (onsite),calibration services - calibration of blue light based geometric measurement system-comet 5 m for 3 years; as per scope of work; any other government approved labs / service provider; buyer premises (onsite),calibration services - calibration of blue light based geometric measurement system-comet 5 m for 3 years; as per scope of work; any other government approved labs / service provider; buyer premises (onsite)

CTN :44539190

13 Jun, 2026 NA

Delhi - Delhi

Tender For bid to ras corrigendum : providing of calibration services - mechanical, electrical; mass and volume, dimension, calibration of thermometer max & min qty 01; nabl labs; lab,calibration services - mechanical, electrical; mass and volume, dimension, calibration of thermometer max & min qty 01; nabl labs; lab,calibration services - mechanical, electrical; mass and volume, dimension, calibration of electronic weighing machine qty 01; nabl labs; lab,calibration services - mechanical, electrical; mass and volume, dimension, calibration of electronic weighing machine qty 01; nabl labs; lab

CTN :45492700

19 Jun, 2026 NA

Coimbatore - Tamil Nadu

Tender For providing of calibration services - baa machine; baa machine; any other government approved labs / service provider; hybrid (detailed in scope of work)

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45296561

19 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : providing of calibration services - calibration of dynamic balancing machine (cap) qty 01; calibration of dynamic balancing machine (cap) qty 01; nabl labs; buyer premises (onsite)

CTN :45476070

15 Jun, 2026 2.37 Crore

Saharanpur - Uttar Pradesh

Tender For audyanik proyog avam prashikshan kendra saharanpur mein nirmaanadhin shahad utkrishthta kendra se sambandhit machinery or parts ki apoorti or establishment ka karya - supply & installation of automatic honey bottling filling machine with sensor based calibrator including with filling range (50 grams to 1000 grams), outout/min (any size within range 3000 to 5000 bpd), filling system (pneumatic vmp system synchronize with servo motor), direction of movement (left to right), number of head/syringe (single), drop controller (y- pneumatic stopper), calibration of machine (automatic with sensor), inlet material stopper (fg valve), feed tank (direct connected), feed tank overflow controller (float type), material feed in m-tank (automatic), heating arrangement in m-tank (water bath system), material shaker in m-tank (electrical shaker), bath temperature & material temperture monitoring system (full auto-control with ccp), electric spply (230 cm v/50hz), tempreture controller (pid), machine dimensions (250 cm x 100 cm x 210 cm (approx) and net weight (300 kg). etc all complete with isi marked., supply & installation of automatic linear capping machine including with output/hour (any size with range 4000 bpd), direction of movement (left to right ), machine dimensions (180 cm l x 90 cm w x 170 cm h (approx)), sensor (panasonic), pneumatic accessories (spac) and no bottle- no cap (yes). etc all complete with isi marked., supply & installation of automatic round bottle sticker labelling machine including with output/hour (10000 bpd), direction of movement (left to right), controlling (micro controller base mm interface), conveyor motor (0.25 hp/415 v/ 50 hz), pressing device motor (60 watt / 220 v/ 50 hz), servo motor (750 watt), label accuracy (+/-1mm), gap sensor (u-type), bottle spacer (electronic), variable speed (40 bpm-max), hmi & plc (7 inch coloured touch pad type), pneumatic (spac), pressure roller (sillicon), adjustment (lead screw), label size (up to 100 mm width), bottle dia (up to 120 mm dia), batch counter (yes) and online data indication (yes) etc. all complete with isi marked., supply & installation of air compressor including with type (reciprocating), tank volume (250 ltr), pressure range (10 kg/ cm 2), no of head-(02 nos.), type (industrial) and operation (continue) etc. all complete with isi marked., supply & installation of induction sealing including with automatic induction sealing machine etc. all complete with isi marked., supply & installation of turn table including with 750 mm dia turn table moc ss304, motor - 0.5 hp/440 vac, vfd - invt/delta and model -cgmp etc. all complete with isi marked., supply & installation of packing conveyor including with 10 feet long packing coveyor, width of conveyor 300 mm, motor - 0.5 hp/440 vac and model - cgmp etc. all complete with isi marked., supply & installation of auto honey feed pump including with automatic honey feed system for filling machine from plant etc. all complete with isi marked., supply & installation of bottle washing machine including with automatic bottle cleaning machine tilting action type etc. all complete with isi marked., supply & installation of particle inspection table including with online particle checker etc. all complete with isi marked., supply & installation of online printer including with online ink jet printer etc. all complete with isi marked., supply & installation of slate chain conveyor including with ss304 slate chain conveyor, motor - 0.5 hpx 3 nos, vfd - 3 nos and guider - as per design etc. all complete with isi marked., supply & installation of automatic wax sheet foundation mill including with sheet making roller set (cell size 5.4 mm, length ,600 mm, dia 200 mm), cold water circulation system 0.5 hp, conveyor belt length - 300 mm, sheet cutting system, water cooling system 1.5 - ton cap, wax malting tank, wax filtration system, ss tray, ss bucket, operation by hmi, dat

Pcr Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government