Latest pe coating Tenders | Government pe coating Tenders

Central Government/Public Sector

CTN :43151722

15 Dec, 2025 NA

Rourkela - Odisha

Tender For epoxy based coating for walk way guide l(3items) comprising of following: 1 - sprinkle quartz f / floor tech sl , 2 - floortech sl,compres strength:650kg/cm2 , 3 - epoxy primer f / floortech sl ,

Corporations And Associations And Others

CTN :43117081

17 Dec, 2025 67.97 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments in najafgarh zone and central zone under mplads funds for various locations of parks in municipal corporation of delhi. - supply and installation of open gym equipments in najafgarh zone and central zone under mplads funds for various locations of parks in municipal corporation of delhi., seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)., cross trainer /elliptical exerciser dimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall b

Central Government/Public Sector

CTN :43030849

24 Dec, 2025 NA

Bangalore - Karnataka

Tender For supply of huntsman araldite with hardner : :--adhesive , stardner adhesive , araldite , araldite 2014 2 , primer coating , hardener , araldite aw 106 english 1 kg can

CTN :43017739

23 Dec, 2025 NA

Cuttack - Odisha

Tender For supply of cold applied coating tape 3ply inner warp , cold applied coating tape 2ply outer warp , primer, cold tape coating , liquid epoxy kit

CTN :43018230

23 Dec, 2025 NA

Allahabad - Uttar Pradesh

Tender For supply of aircraft consumables--polyurethane filler , grease mil g27617 , epoxy primer , polyurethane coating international black , anti corrosive compound z11906 , dry film lubricant molykote 3400 a , polyurethane sealant

CTN :42998827

16 Dec, 2025 NA

Coimbatore - Tamil Nadu

Tender For equipment - purchase of equipments - purchase of equipment- electrostatics spray, the equipment should include spray gun, control unit, powder injector, and powder hopperit should able to coat/spray peek, epoxy & teflonit must work in the following operating conditions1. voltage: 1kv -110 kv2. current: 1ma-100 ma.3. main air pressure: 3.5 bar to 6.5 bar4. powder carrier air pressure: 2.0 bar to 6.0 bar5. powder hopper pressure: 0.5 bar to 4.0 bar 6. powder feeding rate: 1 g/min to 100 g/min7. fluidised powder feeder capacity: min. 1.0 litre air pressure and powder volume must be controlled by digital valve controllercontrol panel must show air pressure, powder feed rate, voltage, current and hopper pressurecontrol panel and powder hopper should be mounted on a suitable trolley connecting hoses must have anti-static propertiese-app for monitoring and programming the coating process is preferablecomprehensive warranty : 2 yearsequipment must be installed and demonstrated at bharathiar university, coimbatore at free of costone day training must be provided at free of costjustification: this equipment is required to carry out the work proposed in the r&d/ consultancy project entitled development of epoxy and peek coatings on ndfeb magnets by electrostatic spray technique

CTN :42972556

29 Dec, 2025 NA

Ernakulam - Kerala

Tender For supply of anti seize compound (ams2518) , general purpose liquid detergent(mil-d-16791) , dry cleaning solvent (mil-prf-680) , corrosion preventive compound, arosol ty3 (mil-c-81309 ty3cl2) , isopropyl alcohol, technical (tt-i-735) , ethyl alcohol (ar) (a-a-53880) , alcohol, denatured, ethyl (o-e-760, type iii) , primer (ar) (dc-1200) , sealing retaining compound (mil-s-22473) , solvent, cement adhesive(mmm-a-121) , chemical conversion coating (ar) (ams-m-3171) , compound, aircraft cleaning (milprf-85570 type ii) , adhesive (rtv-133) , acetone (astm d329) , rtv 732, silastic (mil-a-46106) , compound, corrosion preventive (mil-prf-81309 tycl2gr134a) , thread lockers, loctite (thereadlocker 262) , chemical conversion coating (ar) { ea 9394 (04347) } , adhesive, silicone (mil-a-46146) , 3m neoprene high performance contact(ec 1300l) , sealing compound (astm d5363 an0141) , adhesive (82c18) , resin (ar) { epikure 3223 (07452) q} , compound, corrosion preventive (cor-ban 27l) , corrosion preventive compound (ar) { mil-prf-16173 grade 4) , corrosion preventive (ar) (cor-ban 35) , corrosion preventive compound (mil-c-16173, grade 4) , sealing compound (ams-s-8802) , sealing compound low adhesive (ar) (ams3284) , corrosion preventive compound(ar) (milprf-16173) , chemical conversion coating sempen (ar) (alodine 1132) , primer, mastinox (6856kd150-2) , sealants(astm d5363) , loctite hydraulic sealant (ar) (gr. 69 (05972) , chemical conversion coating (mil-dtl-81706) , compound corrosion (mil-prf-81309) , compound anti seize (mil-prf-83483) , anti seize compound (mil-prf-907) , sealing retaining compound ((ar) (mil-s-22473 grn) , silicon fluid (ar) (dc-200 (94499) , alkaline cleaner (ar) (daraclean 282) , av-dec connector sealing kit (en110589-01) , high solid polyurethane coating (mil-prf-85285) , thread lockers, loctite (loctite 262) , thread lockers, loctite (loctite 222) , adhesive (ar) (ec1357) , k & n filter cleaner (99-0635)

CTN :42938289

17 Dec, 2025 NA

Ernakulam - Kerala

Tender For tender for supply of 17 by type hazmats d d - sealant , thread locking , primer , zinc chromate , sealing retaining compound , compound , cleaning , alcohol , denatured , ethyl , coating , epoxy primer , anti seize compound , sealing compound (torque stripe) , yellow , compound , corrosion preventive , isopropyl alcohol technical , acetone , sealing compound , paint , polyurethane , corrosion preventive compound , adhesive , cleaning compound solvent , lubricant , solid film

CTN :42533810

23 Dec, 2025 NA

Delhi - Delhi

Tender For procurement of spares for rafale aircraft - hardener,enamel, filter cartridge, screw, primer coating, coating compound,nonslip, ewmprs ise softeare, chinstrap, mineral petrolatum, screw,cap,socket head, spacer, washer,flat, socket, plate,instruction, pin straight headless, setscrew, stencil tail aircraft number "2", sealing compound, thread

Pe Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

Central Government/Public Sector