Latest pebble stone Tenders | Government pebble stone Tenders

Central Government And Public Sector

CTN :40534153

09 Jun, 2025 16.93 Lacs

Agra - Uttar Pradesh

Tender For repairs to jere hamam and langer khana area at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (packing in bags 25kg & 50 kgs) (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (bansi paharpur qurry).(rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), water proofing compound (rate including g.s.t.)., clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), taking out of angle iron frame 40x40x6 mm having 12mm square bar with spikes 1.25mtr high and hold fast by manual labour and stacking within 50 meters lead etc. complete in all respect. (rate including g.s.t.), taking out stone masonry manually bit by bit without disturbing to the adjoining structure including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge : in cement mortar. (rate including g.s.t.), random rubble stone masonry with hard stone in super structure in cement mortar 1:6 (1cement 6 c. sand) including pointing, t&p, scaffolding etc. complete. (rate including g.s.t.), cr stone masonry with 70% available stone and 30% new stone in super structure and plinth with cement mortar 1:6 (1 cement: 6 coarse sand), pointing, scaffolding etc. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement: 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), repairing of old existing grills in boundary wall including supply of required materials, welding, fabricating & labour etc. complete. (rate including g.s.t.), providing & fixing m.s. gates of required pattern with angle iron frames (50x50x6)mm size graded with 10 cm c/c sq. bars 16mm size pointed at the top extra with same curved bar and each frame having gusset plate 6mm thick at corners & center and provision for hinges and locking arrangement with supply of r.s. joist (200x100x5.7)mm section for hanging m.s. gate including nut bolts, cutting fabricating welding etc. complete. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6) mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), coursed rubble masonry with hard stone (first or second sort) in facing up to 22.50 cm thick random rubble masonry in back side in superstructure above p

CTN :40537574

06 Jun, 2025 4.67 Lacs

Belagavi - Karnataka

Tender For supply of materials for improvements of smashan of survey no 313 in kudremani village - fitter(grade1).,., mason (brick layer) ist class.,., carpenter 2nd class.,., mason (brick layer )2nd class.,., air compressor (1 hour initial + 1 hour final), concrete jiont cutting machine for initial and final cuts,., plate vibrator having 3 ton compaction force.,, screed vibrator .,, needle vibrator.,, super plasticizer admixture is marked as per 9-103, joint sealant,, sealant primer,, seperation membrane of impermeable plastic sheeting 125 micron thick, coarse aggreages 12 mm,.,, plate vibrator having 3 ton compaction force,, mason class i (with tools).,.,, cobble stones of 75mm thick,, crushed stone chippings 13.2 mm.,, granite metal 20 mm.,, granite metal 40 mm.,, crushed stone course aggregate 53.,, vibratory roller 8 tonne,., water tanker,, gravel 2.36 mm/murrum,, water.,., tractor - 40 hp.,, laboratory asst. (sslc passed)/mate/supervisor,, unit cost as per the specification,, enamel metal paint.,, painter class i.,, ready mix primer paint (ready mix red lead paint)., hom of cutting and grinding machine.,, add,, hom of welding and grinding machine.,, welder grade 1., corbon electrodes.,, anchor bolts 750mm.,, base plate/ base plate, gusset plates 6 mm thick., ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre,., ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at4.5 kg per metre, binding wire,., tmt bars fe 500,., mixer (concrete small used in culvert.), burnt bricks class 35 (non modular).,, casurina poles 100 - 150 mm.,, hom of vibrator 0.71 days.,, plasticizer / super plasticizer.,., casurina poles 75 - 100 mm dia., jungle wood runners and plank.,, silver oak, or equivalent planks 38 mm thick.,, mixer (concrete) - 1 cum capacity.,, portland cement,., coarse sand (zone iii),, broken stone aggregate 12 mm to 10 mm size,, broken stone aggregate 20 mm size,, broken stone aggregate 40 mm size

CTN :40508238

18 Jun, 2025 NA

Kamrup - Assam

Tender For supply of construction material for bty comd post 8.06m x 6.02m x 3.40m as per technical specification and drawings attached , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 - 1989 make birla gold or ambuja or ultratech or acc or jk or dalmiya , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40-63 mm graded , stone boulder 9 inch to 12 inch , water proofing compoundconfirming to is 2645-2003 make pidilite or dr.fixit or fevicol , hdpe sand bag og colour of size 15 inch x 30 inch , painting brush 4 inch isi marked , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make berger or asian or nerolac , synthetic paint enamelled og confirming to is 5-2004 make berger or asian or nerolac , thinner make nerolac or berger or asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw camouflage pattern , ismb hot rolled ms 200 x 100 3m maketata or sail or jsw , ismb hot rolled ms 200 x 100 4m make tata or sail or jsw , polythene sheet colour less and weight of sheet shall be not less than 70gm per sqm , pbs roll 20m long width of 0.9mtr isi marked with min weight of 34 kgs per roll , prefeb mild steel door of size 900x 1700mm outer frame made out of isa 40x 40x6mm , shuttering and nails wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , lightning conductor air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal or tata or kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make - presto or polycab or finolex , charcoal , slt , double sleeping bunk complete with plywood matress and all connected accessories all as per technical specification. , study chair of size length 56cm height 82 cm width 56 cm lacqured finish with arm seat and back cushion velvet holestry make supreme or equivalent , study table of size 4x2 wooden top on round tube structture with three drawers unit , steel bed side locker of size 1000mm x 1520mm x 450 mmcomplete with all accessories as per tech spec. , water dispenser of 230 v 500 watts without refrigerator with normal cold and heating capacity of 5 lts per hour , plastic dustbin of capacity 40 ltrs make neelkamal or cello or supreme. , solar system comprising of 1 x 500 watt monocrystaline pv panel 100ah solar bty min 550va ac or dc inverter with inbuilt mppt and charge controller equivalent , portable indoor type high quality kero heater metal body ignites type of continues heating duration min 8 hrs

CTN :40492370

16 Jun, 2025 NA

Mathura - Uttar Pradesh

Tender For tender for supply of cooker oil blamp vlve cont mk 3 washer , washer leather pump cup shaped cobl mk 1 , cobl burner jet vaporiser mk 2 , cooker oil blow lamp pump washer packing , s cotton thread 165 dtex x6 og 1000m , mask dust , plane plough complete with 8 single iro , chisel firmer strong complete fitted wi , spnr o j f d e stl pltd mm 19x22 , brushes paints and varnishes flat 25 mm , pins cotter split steel 4.0 mm x 40 mm , nail brad steel cut 12mmx1 25mm , cloth dosutie cotton og 91 cm wide , paint finishing matt rfu air drying b , electrodes welding steel mild general p , glue ordinary , wire steel mild annealed o.56mm , paint rfu fin syn ena br spr mid stone , chloroxylenol solution , electrodes welding steel mild general pu , solder soft grade f rosin cored 50 tin , adhesive syn resin araldite ay 103 , nails steel wire round 150 mm x 6 3 mm , paint rfu priming red oxide , paint rfu air dry br spr ena green grass , powder cleansing , twine jute , polish leather black , polish wax , adhesive padding glue mowicol l , paint rfu finishing general service , paint remover inflammable , abrasive cabrasive cloth glass is grit 1 , flux soldering paste , varnish oil g s , rod welding steel mild 3 15mm , soap soft , flux welding aluminium 110g container , nails steel wire round 25mm x 2 mm , paint rfu marking black , wire steel mild annealed 4mm , abrasives cloth emery 280 x 230mm , wire stl mild drawn glvd 2 mm , chalk frenchtechnical , tape adhesive transparent waterproof wid , paint r f u marking golden yellow , wire steel mild bright 2 50mm , paper wrapping brown unglazed 560 mm x 7 , abrasives cloth emery or corundom size , paint rfu fin airdrying br spr syn enam , abrasives cloth emery or corundum size o

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

Central Government/Public Sector

CTN :40485339

10 Jun, 2025 NA

Delhi - Delhi

Tender For supply of repairing items of air dryer, make: stone india, consisting of 04 items (1) pressure switch, part no: 09871901-01 no. (2) drain valve assembly, part no: 09890101- 01 no. (3)purge valve right, part no: 09890201-01 no. (4) purge valve left, part no: 09890202-01 no.or similar [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40446986

13 Jun, 2025 5.20 Lacs

Tawang - Arunachal Pradesh

Tender For supply of stone cursher 20 tph abhishek - jcab a01 002 2 fix jaw plate , jcab a01 003 3 side plate lh rh , jcap a02 02 34 swing jaw plate , 1005607 air cleaner primary , 1005606 air cleaner tertiary , f8835100 fuel filter element , f7a01500 oil filter , jcab a01 028 29 v belt standard , sda a10 03 157 v belt , sba a09 15 148 wire mesh deck 01 , sba a09 15 149 wire mesh deck 02 , sba a09 15 151 wire mesh deck 04 , cua500 a12 24 215 return roller , cua650 a13 23 260 return roller , jcab a01 013 13 tie rod spring

CTN :38924592

06 Jun, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester

CTN :39038234

06 Jun, 2025 13.98 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin operator advanced machine tools (oamt) tradeat iti suart, gujarat, india (package 4: oamt trade) - surface grinding machine , cnc machining centre , cnc milling tools for above machine , cnc turn centre , edm , cnc simulator , vertical-spindle five-axis machining centres , cnc tool pre setter , ss and sc centre lathe (all geared) with having minimum specification , universal milling machine with minimum specification , horizontal milling machine with minimum specification , vertical milling machine , universal tool and cutter grinding machine , cnc lathe machine , tool holders to suit the cnc turn centre , jig boring , gear hubber , gear shaper machine , power saw machine-hydraulic feed system , cylindrical grinder , power saw machine , pedestal grinder double end type. , radial drill motorized with tapping attachment , drilling machine pillar type with drill chuck & key. , slotter , double column planer , shaping machine , shaping machine , co-ordinate measuring machine , cnc wire cut edm (electrical discharge machining) , special tools and equipment , involutes gear module , surface plate , marking table , scribing block universal , v-block , combination set , spanner double ended metric , adjustable spanner , reduction sleeve morse taper , angle plate adjustable , oil stone , number drill h.s.s(parallel shank) , drill (parallel shank) , twist drills , drill chuck , centre drill , grinding wheel dresser(diamond) , grinding wheel dresser hunting type , c- clamp , c-clamp , tap & die set inbox metric pitch , reamer , reamer adjustable , machine vice , machine vice , machine vice , universal machine vice , universal table angle plate , taper shank twist drill set , shaper tool holder turret type , knurling tools (set of 3) straight and diamond , carbide tipped tools of different sizes and shapes (through away tips) , micrometer outside , micrometer outside , micrometer outside , digital micrometer outside , digital micrometer outside , digital micrometer outside , digital vernier calliper , micrometer depth gauge , dial vernier calliper , vernier height gauge , vernier bevel protractor with blade , bevel gauge , telescopic gauge , sine bar , inside micrometer , inside micrometer , dial test indicator , slip gauge set (normal set) metric , plug gauges , ring gauges , snap gauge , vernier caliper , cylindrical cutter , cylindrical cutter , side and face cutter , side and face cutter , side and face cutter , side and face cutter , equal angle cutter , equal angle cutter , equal angle cutter , t" slot , t" slot cutter , t" slot cutter , t" slot cutter , single angle cutter , single angle cutter , single angle cutter , single angle cutter , double unequal angular cutter , double unequal angular cutter , end mill cutter , concave cutter , convex cutter , corner rounding cutter , corner rounding cutter , slotting cutter , slotting cutter , slitting saw cutter , slitting saw cutter , slitting saw cutter , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , shell & end mill cutter , shell &end mill cutter , face mill cutter with inserted tip , face mill cutter with inserted tip , face mill cutter with inserted tip , involutes gear module , air conditioner split , dg set , air conditioner , wall charts, transparencies and dvds , air conditioner , steel rule , divider , centre punch , hammer ball pane , combination plier , file flat bastard , file flat 2nd cut , engineers screwdriver , file flat smooth , cold chisel flat , try square , straight edge steel , steel tape , soft hammer , sprit level , hammer ball pein , screwdriver, heavy duty , hammer lead , screwdriver , allen hexagonal keys , angle plate , solid parallel sine pair (different size) in metric , oil can pressure feed , file flat 2nd cut , file flat smooth , fi

CTN :40388394

09 Jun, 2025 NA

Chandigarh - Chandigarh

Tender For supply of adopter for pneumatic grinder 3 by 4 inch , air hose clamp 20 mm dia with nut and bolt , air hose joint nipple 20 mm dia , air line lubricator make atlas copco model glg 10 , bracket for pusher leg jack hammer rh 656w for pusher leg , claw coupling with hose nipple 3 by 4 inch 20mm , claw coupling rubber washer 20 mm , pneumatic straight grinder make atlas copco model lsr48 so90 10 , grinding stone size 150x25x15mm , heavy duty pneumatic rubber air hose 20 mm for 10 point 2 kg cm 2 pressure conforming to is 911 1968 is 446 1980 , pneumatic jack hammer make atlas copco type rh 658 5l , lubricator coupling , pneumatic pusher leg make atlas copco model bmt 51 , rubber washer for lubricator , tct drill rod 22 mm 7 by 8 inch chisel bit integral rod hex 22 mm shank hex comma 22 mm x 108 mm length 800 mm bit dia 34 mm make atlas copco , tct drill rod 22 mm 7 by 8 inch chisel bit integral rod hex 22 mm shank hex 22 mm x 108 mm length 1200 mm bit dia 34 mm make atlas copco , tct drill rod 22 mm 7 by 8 inch chisel bit integral rod hex. 22 mm shank hex 22 mm x 108 mm length 1600 mm bit dia 34 mm make atlas copco , tct drill rod 22 mm 7 by 8 chisel bit integral rod hex. 22 mm shank hex 22 mm x 108 mm length 3200 mm, bit dia 34 mm make atlas copco , r 32 button bit, 51 mm r32 make sandvik , coupling sleeve for extension rod r32 drill rod make sandvik , shank adopter for r32 drill rod make sandvik , coupling sleeve , male female coupling , adopter for air hose , tct drill rod 22 mm 7 by 8 inch chisel bit integral rod hex 22 mm shank hex 22 mm x 108 mm length 600 mm bit dia 34 mm make atlas copco , tct drill rod 22 mm 7 by 8 inch chisel bit integral rod hex. 22 mm shank hex 22 mm x 108 mm length 1800 mm bit dia 34 mm make atlas copco , tct drill rod 22 mm 7 by 8 inch chisel bit integral rod hex 22 mm shank hex 22 mm x 108 mm length 3600 mm bit dia 34 mm make atlas copco , y joint connector , extension rod r 32 comma 3050 mm long make sandvik

Pebble Stone Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector