Get complete information related to latest Pedestal Fan Hiring Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pedestal Fan Hiring Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pedestal Fan Hiring Tenders.
Tender For auction sale of rolling stock - pl no.98111061, condemned bg-8 wheeler- icf ac coaches 3 nos, without bogie, with all available ferrous, non-ferrous-wooden fittings thereon but excluding the following reclaimable items. 1} coach no. special repair accn 056905 (year built 2005), ds-8 no. 334716 dt 31.03.26, mechanical rc items are common for all three coaches as per sse/c&w/srr letter dt 24.01.2026- 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 sets, 4] center pivot 2 nos. 5] bogie mounted brake cylinder 4 nos, 6] distributor valve complete full set 1 set, 7] wearing piece( bronze) and plate 4 nos each, 8] auxiliary reservoir 200 l. 1 no 9] main doors -4 nos 10] cut off angle cock- 4 nos. 11] dirt collector- 2 nos 12] non return valve(fp)- 1 no. electrical rc items as per sse/electrical/srr /letter no.elg/srr/6a dt 23.01.2026- 1] alternator - 2 nos 2] regulator - 2 nos 3]vrla battery -56 nos. 4] tensioning device - 4 no 5] bldc fan 400 mm-8 nos. 6] 150mm fan- 4 nos 7] exhaust fan-04 nos 8]5 w led with fittings (double led)- 16 nos 9] 5 w led with fittings (single) - 5 nos 10] 2w led 8 nos 11] emergency light unit-3 nos 12] d type led fitting - 5 nos 13] md switch-32 nos 14] mobile charger - 16 nos 15] axle pulley -4 nos 16] pumb - 2 nos 17] pre cooling unit - 1 no 18] pre cooling socket -1 no 19] inverter panel- 2 units 20] power panel- 1 unit 21] rmpu- 2 units.. 2} coach no. special repair accn 056904 (year built 2005), ds-8 no. 334717 dt 31.03.26, electrical rc items as per sse/electrical/srr /letter no.elg/srr/6a dt 23.01.2026-1] alternator 25 kw - 2 nos 2] regulator - 2 nos 3] vrla battery -56 nos. 4] tensioning device - 4 no 5] inverter 2 nos 6] bldc fan -8 nos. 7] emergency light unit-2 nos 8] 150mm fan- 4 nos 9] exhaust fan-04 nos 10] 5 w led with fittings (double led)- 18 nos 11] 5 w led with fittings (single) - 1 no 12] 5 w led -5 nos 13] axle pulley -4 nos 14] pump - 2 nos 15] pre cooling unit -1 no 16] pre cooling socket - 2 nos 17] inverter panel -2 units 18]power panel- 1 unit 19] rmpu- 2 units.. 3} coach no. special repair accn 041198 (year built 2004), ds-8 no. 334718 dt 31.03.26, electrical rc items as per sse/electrical/srr /letter no.elg/srr/6a dt 23.01.2026-1] alternator - 2 nos 2] regulator - 2 nos 3]vrla battery -56 nos. 4] tensioning device - 4 no 5] inverter 2 nos 6] bldc fan -8 nos. 7] 150mm fan- 4 nos 8] exhaust fan-04 nos 9]5 w led with fittings (double led)- 18 nos 10] 5 w led with fittings (single) - 6 nos 11] d type 5 w led 2 nos 12] 2 w led-8 nos 13] md switch-32 nos 14] mobile charger - 8 nos 15] axle pulley -4 nos 16] pump - 2 nos 17] pre cooling unit - 1 no 18] pre cooling socket -2 nos 19] inverter panel- 2 units 20] power panel- 1 unit 21] rmpu- 2 units. custodian sse/ c&w/ shoranur.
Tender For auction sale of rolling stock - pl no.98111061, condemned bg-8 wheeler- icf ac coaches 2 nos, without bogie, with all available ferrous, non-ferrous-wooden fittings thereon but excluding the following reclaimable items. 1} coach no. special repair accn 051083 (year built 2005), ds-8 no. 334705 dt 02.04.2026, mechanical rc items as per sse/c&w/srr letter dt 14.01.2026, coach no. special repair accn 051083- 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos each 3] cbc/screw coupling complete set [draw bar with hook, draft gear assembly] 2 set, 4] bogie mounted brake cylinder 4 nos, 5] main doors 4 nos, 6] wearing piece( bronze) and plate 4 nos each, 7] distributer valve complete full set 1 set, 8] cut off angle cock- 4 nos. 9] dirt collector- 2 nos electrical rc items as per sse/electrical/srr letter no. elg/srr/6a dt 03.03.2026 and lot inspection report dtd 10.06.26- 1] alternator 25 kw 2 nos, 2] regulator - 2 nos, 3]vrla battery 1100 ah -56 nos, 4] tensioning device 4 nos, 5] inverter 2 nos, 6] pre-cooling transformer amalgamated 1 unit, 7] power panel 1 unit, 8] mobile charger 16 nos, 9] emergency light unit 2 nos, 10] md switch 32 nos, 11] fan 400 mm sweep 1 no, 12] 150mm fan 4 nos, 13] exhaust fan 04 nos, 14] fan 200 mm 7 nos, 15] 5 w led with fittings 24 nos 16] 2w led (night lamp) 8 nos, 17] axle pulley 4 nos, 18] wra 2 nos, 19] change over switch 02 nos, 20] inverter panel 2 units, 21] rmpu 2 units 22] pre-cooling socket 2 nos 2} coach no. special repair wgaccn 056143 (year built 2005), ds-8 no. 334708 dt 21.04.2026, mechanical rc items as per sse/c&w/srr letter dt 15.04.2026, coach no. special repair wgaccn 056143. 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos each 3] cbc/screw coupling complete set [draw bar with hook, draft gear assembly] 2 sets, 4] bogie mounted brake cylinder 4 nos, 5] main doors 4 nos, 6] wearing piece( bronze) and plate 4 nos, 7] distributor valve complete full set 1 set, 8] cut off angle cock- 4 nos. 9] dirt collector- 2 nos. electrical rc items as per sse/electrical/srr letter no. elg/srr/6a dt 17.04.2026 and lot inspection report dtd 10/06/2026-1] regulator 25 kw 2 nos, 2]vrla battery 56 nos, 3] inverter 2 nos, 4] bldc fan 8 nos, 5] emergency light unit 2 nos, 6] 150mm fan 4 nos, 7] exhaust fan 04 nos, 8] 5 w led with fittings 21 nos, 9] night lamp 8 nos, 10] d type light fittings 4 nos, 11] mobile charger 16 nos, 12] pump 2 nos, 13] pre-cooling unit 1 no, 14] pre-cooling socket 1 no, 15] power panel 1 unit, 16] inverter panel 2 units, 17] rmpu 2 units 18] alternator 2 nos 19] axle pulley 4 nos 20] md switch 32 nos 21] tension device 4 nos.. custodian sse/ c&w/ shoranur.
Tender For tender for supply of suction transition for id van typkan 25025125 suspension assembly for igv unit ansly of idyan type an 25 bracket for igy emt assely of of induced draft fan type an 256 bgy shart of induced draft fan tupean 25 driving lever for igy unit assly of of induced draft fan type an 25 bearing pedastal poligy unit assey of of induced draet kan jount rod assembly as part no. 177551150igiri, id fan inlet guide vane unit assembly of id fan angularjantai partn exchangeable vane, part no tp7551240111s, id fan inlet guide vane init assembly of id flange hearing with t 0012 for ed fan an 20l nimiseer ringxxbafor flange bearing inner bearing ansly of libean type an 25 lock nut km 11, part n tp550150002106 fan flange bearing assembly farts of id olskal ha 78x 10x13, flange bearing assly.parts of induced draft fan stage-je bearing housing assembly part no titan external bearing assembly parts of id fan grease quantity control hing, part no. 755124811211, id fan external bearing assembly parts of id fan felt gaskets part o tpaid fan external bearing assembly farts of ir external bearing spacer, part me ip715124827215, idean external bearing assembly paris of id fan lock nut me parynol 1950158071 id fan external beaming assembly farin of id ban patan nd 220 нуни circlip a-26 sparecedend lock nut km36 fome papantype nde it, drgno-55-815-0000 spare code no-5550063600 make-bhel lock nut km 445501500040055-015-0006481or fa fan nif 228 lock wasziel mb-mbhel spare code-55014 adaptor sleeve lock waszier mr 44 angular rings-244 for patan 220 hybrid on 200 mw boiler coupling set with bolt a hush for pa fan nde-228 make-briel domw unit 14 αατικαι tes bearing bush for pa, fannde 228 hybrid as per drawing n1-48-a-187-263 clamp seal assey partno 132187 for pafantypend 22 ring for clamp seal ansly part no. 418945 for papan type ndv 22 tief stack skal for impeller set for fa fan typendy 12 tief stack sealing for impeller part notp7541345 of primary air fan type nov 22 theestack coupling set with holtash fur pa fan type nov-22 tieustack mohel as per drawing no.3-56-434-006 make-bhel, 218 mw unitatsκαι τρα labyrinthshalambly for pafan typendv-22 smobel as per drawing stack no.354269477 & spare co notp75622684100 make-bel, 119 mw unit-sat ukai ips assembly of forced draft fan type api 18/11 angulair heng part nix panmain bearing assembly of idean beaming assembly of for draft fan type apt 1/11
Tender For corrigendum : supply of sector plate hot end (primary to secondary) for αρη τυρε 27.5 vimt 2000 sector plate hot end (gas to primary) for aph type 27.5 vimt 2000 sector plate hot end (gas to secondary) for aph type 27.5 vimt 2000 sector plate cold end (primary to secondary) for αρη τυρε 27.5 vimt 2000 sector plate cold end (gas to secondary) for aph type 27.5 vimt 2000 sector plate cold end (gas to primary) for aph type 27.5 vimt 2000 static seal assembly (hot end + cold end) for aph type 27.5 vimt 2000 radial seals (hot & cold ends) for air preheater 27.5 vimt 2000 by-pass seals for air preheater 27.5 vimt 2000 steam soot blower nozzle for apη τυρε 27.5vmit 2000 , over running clutch assembly for guide trunnion with bolts air preheater 27.5 vimt 2000/over running clutch fso-400 for aph type: 27.5 vmit 2000 fixing pin as per drg. no. 4-55-335-00983 p.a fan ap2-17/12 for unit no 3 & 4 of sikka tps rectangular ring as per drg no. 0-55-334-00661 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps cylindrical helical spring as per drg no. 4-55-214-00246 for p a fan ap2-17/12 for unit no 3 & 4 of sikka tps cheese head bolt m 16x50 as per drg no. 0-55-334-00661 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps nut as per drg. no. 4-55-335-00993 for pa fan ap2-17 /12 for unit no 3 & 4 of sikka tps bearing cover assy as per drg no. 0-55-335-00619 for pa fan ap2-17/12 for unit 3&4 of sikka tps distance ring as per drg no. 4-55-335-00859 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps sealing ring as per drg. no. 3-55-335-00651/01 for pa fan ap2 17/12 expansion delivery side drg no. 3-55-334-00673 for pa fan ap2-17/12 for unit 3&4 of sikka tps split thrust coller as per drg no. 2-56-134-01102 for id fan ndzv 33 sidor for unit no 3 & 4 of sikka tps end closure kit as per drg no:3-56-135-00911 for for id fans ndzv 33 sidor for unit no 3 & 4 of sikka tps. circlip sb 26, blade bearing assembly of forced draft fan tyρε αρ1 18/11 , hfo oil gun nozzle spray plate 90-j16 i,rsb traviirsii csain assiimbly radial brg 200fxm85 skf-61840 of hydraulic turning motor, item no. 6, drg-11150146000/6 for 250 mw of sikka tps unit no. 3&4. sleeve of hydraulic turning motor, item no. 9, drg νο. 11150146000/9 for 250 mw of sikka tps unit no. 3&4. shaft b48x44 of hydraulic turning motor, item no. 3, drg no. 11150146000/3 for 250 mw of sikka tps unit no. 3&4. shaft nut of hydraulic turning motor, item no. 11, drg no. 11150146000/11 for 250 mw of sikka tps unit no. 3&4. lock washer dia 55 skf-mb1155 of hydraulic turning motor, item no. 12, drg no. 11150146000/12 for 250 mw of sikka tps unit no. 3&4. ring of hydraulic turning motor, item no. 10, drg no. 11150146000/10 for 250 mw of sikka tps unit no. 3&4. scru cap soc a12.9 m10x75 of hydraulic turning motor, item no. 19, drg no. 11150146000/19 for 250 mw of sikka tps unit no. 384. scru cap p-8.8 m12x90 of hydraulic turning motor, item no. 20, drg no. 11150146000/20 for 250 mw of sikka tps unit no. 3&4. throttle valve of hydraulic turning motor, item no. 22, drg no. 01165524000/22 for 250 mw of sikka tps unit no. 3&4. scru cap p-8.8 m20x60 of journal bearing no. 2, item no. 16, drg no. 01170318000/16 for 250 mw of sikka tps unit no. 3&4.
Tender For providing of custom bid for services - repair, rectification and balancing of primary air fans, forced draft fan, induced draft fans and seal air fans rotor assembly of bhel make fans of spp, nalco, damanjodi
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-wc-081581/ accnh /rcf 2-wc -081405 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/12/0048. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-wc-081432/ accnh /rcf 2-wc -081390 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/12/0049. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-wc-081505/ accnh /rcf 2-wc -081431 accnh/rcf 3-wc -081327 accnh/rcfnote : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/12/0050. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.
Tender For auction sale of rolling stock - pl no.98111061, condemned and over aged bg-8 wheeler icf coach 2 nos. with all available ferrous non-ferrous wooden fittings thereon but excluding the following rc items. 1}coach no. special repair cn 046245 (year built 2004), ds-8 no. 334714 dt 31.03.26, mechanical rc items as per sse/c&w/srr letter no.s-98/coach condemnation/rc items dt.04-11-2025 , coach no.srcn 046245 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 set, 4] center pivot 2 nos. 5] bogie mounted brake cylinder 4 nos, 6] distributer valve complete full set 1 set, 7] wearing piece( bronze) and plate 4 nos each, 8] auxiliary reservoir 200 l. 1 no 9] main doors -4 nos 10] water tank-4 nos 11] cut off angle cock -4 nos 12] dirt collector- 2 nos 13] non return valve(fp)- 1 no, electrical rc items as per sse/electrical/srr letter no.elg/srr/6a dt.09.09.25. 1] bldc fan 400 mm-27 nos. 2]9w led lamp-26 nos. 3]2w lamp -8 nos 4]eml- 4 nos 5]mobile charger socket-18 nos. 6] regulator 4.5 kw- 1 no 7]vrla battery with tray-19 nos. 8] battery tray- 4 nos.9] rotary switch with panel board- 1 no 10] alternator to regulator wire ( copper ) -1 kg 11] one alternator(4.5 kw) & one set of axle pulley ( with bogie), 2} coach no. special repair cn 046213, (year built 2004) ds-8 no. 334715 dt 31.03.26, mechanical rc items as per sse/c&w/srr letter no.s-98/coach condemnation/rc items dt.04-11-2025 , coach no.srcn 046213 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling complete set [draw bar with hook, draft gear assembly] 2 set, 4] bogie mounted brake cylinders- 4 nos 5] distributer valve complete full set 1 set, 6] wearing piece( bronze) and plate 4 nos each, 7] auxiliary reservoir 200 l. 1 no 8] main doors -4 nos 9] water tank-4 nos 10] cut off angle cock -4 nos 11] dirt collector- 2 nos 12] non return valve(fp)- 1 no, electrical rc items as per sse/electrical/srr letter no.elg/srr/6a dt.25.07.25. 1] bldc fan 400 mm-27 nos. 2]9w led lamp-26 nos. 3]2w lamp -8 nos 4]5w westibal 2 nos 5]eml- 4 nos 6]mobile charger socket-18 nos. 7] regulator 4.5 kw- 1 no 8]vrla battery with tray-19 nos. 9] battery tray- 4 nos.10] rotary switch with panel board- 1 no 11] alternator to regulator wire ( copper ) -1 kg, custodian sse/ c&w/ shoranur.
Tender For corrigendum : supply of boq misc c c - cs seamless impulse lines for oil (od 17mm, id 10mm) max. press 25kg, ss hose (bellow) pipe with ss brading having ss union socket with end fittings at both sides-, dimensions:, length: imtr hose pipe dia: 20 mm, (excludind brading), other details as per drawing, flexible hose pipe (length - 370 mm) dia-1/4" (6mm), (as per sample provided by user division), seal kit for induced draft fan actuator (as per sample), seal kit for forced draft fan actuator (as per sample), seal kit for 12" bore power cylinder (as per sample provided by user division)