Latest peg table Tenders | Government peg table Tenders

Central Government/Public Sector

CTN :45638177

05 Aug, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of ms plate of size 200 x 75 x 5 mm to material spec. is:2062 e250a, table 1. note : the cut plate to be uniform, bend edges are not accepted. [ warranty period: 30 months after the date of delivery ]]

Central Government/Public Sector

CTN :45730255

22 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of m.s. butt hinge cold rolled medium weight 100x58x1.9 mm dully stamped with n.w.rly. initial, table-2 to is:1341/2018 rev-6, amndt. no.2 ]

Central Government/Public Sector

CTN :45736475

30 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of m.s. butt hinge cold rolled medium weight size-75x47x1.7 mm ,dully stamped with n.w.rly initial, table-2 to is:1341/2018 rev-6 amndt.2. ]

Central Government/Public Sector

CTN :45737465

04 Jul, 2026 NA

Jodhpur - Rajasthan

Tender For supply of 3 kvar metallized polypropylene gas-filled, wavy cut, three-phase, self-healing type capacitors, rated at 480v, 50 hz, rated current 3.6 amps, diameter size 2". capacitor should have discharge resistor and over pressure disconnection, as per rdso modification sheet no. rdso/pe/ms/ac/0054-2011 rev.-0 or latest, and conforming to is:13340with isi mark. suitable for use in capacitor banks of lhb ac coaches. make: epcos. type: phicap, cat no. b25671r4032a080, and m/s vishay or any other make conforming to is:13340with isi mark and having properties as defined in table-1 of rdso modification sheet no.rdso/pe/ms/ac/0054-2011 (rev.-0). [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

Central Government/Public Sector

CTN :45726523

20 Jul, 2026 27.00 Lacs

Likabali - Assam

Tender For provn of furniture basic furniture and lockers for certain units at likabali mil stn. - locker steel bed side (drg no.fd-1029 ), almirah steel large (drg no. fd-1031), bed hard steel for officers ( drg no. fd-e6/map/08r), sofa 4 seater (2+1+1) ( drg no. fd/map-ii/02), chair dining officers ( drg no. fd/map/ii/04), table centre 2 tier ( drg no.fd-393/274), table writing (1145 x 600 x 760 mm) ( drg no. fd-275), chair easy steel (drg no. fd-121), peg table (450 x 300 x 380 mm) ( drg no.fd-236/277/384), chair easy cushion ( drg no.fd-358), hat stand with mirror large ( drg no. fd-362), table bed side ( drg no.fd-e6/map/15r), table dining 4 persons ( drg no.fd-map-ii/03), chair writing ( drg no.fd/e6/map/12), sofa set single seater ( drg no. fd/map-ii/02), rack shoe steel ( drg no.fd/e6/map/02r)

CTN :45281937

02 Jul, 2026 41.99 Lacs

Imphal - Manipur

Tender For bid to ras supply of living shelter ojl shelter part , living shelter ojl constr mtrl , single sleeping bunk , bed side locker , writing table , chair writing , chair easy , peg table , water dispenser , hand held fire extinguisher , interlocking paver blocks for pathway

CTN :45739103

10 Jul, 2026 4.47 Lacs

Jalandhar - Punjab

Tender For supply of brass elbow 0.75 inch x 0.50 inch cpvc , over cross 0.75 inch cpvc , plain tee 0.75 inch cpvc , plain elbow 0.75 inch cpvc , cp nipple 0.5 inch x 1 inch , cp nipple 0.50 inch , cpvc solution 250 ml , dhaga , safeda 100 gm , pipe hook , pvc pipe 4 inch , plug 0.50 inch cpvc , mt 0.75 inch x 0.50 inch cpvc , ft 0.75 inch x 0.50 inch cpvc , bend 4 inch , tee 4 inch , full trap 4 inch , brass tee 0.75 inch x 0.50 inch cpvc , fastener 3 inch , pvc connection 18 inch , cpvc pipe 0.75 inch , cpvc pipe 1 inch , washbasin divertor outer part , looking mirror with light size 4 inch x 3 inch , towel ring , towel rod , cp waste 6 inch , waste pipe , plain jali , bottle trap 15 inch , plain reducer 1 inch x 0.50 inch cpvc , ft 0.75 inch x 0.75 inch cpvc , p trap 4 inch , white cement , urinal complete set , soap dispenser , paper holder big , table top washbasin , concealed stop cock complete , concealed tank complete , angle wall , hand jet for wc , wall hung wc , rack bolt for wc , pvc solution 500 gm , teflon tape , hand dryer 1800 w , water tank 500 ltr , ms angle 1.5 inch x 1.5 inch , welding rod size 10 no. , electric wire 1mm , electric wire 1.5 mm , electric wire 2.5 mm , led light 8 w , switch 5 amp , socket 5 amp , power switch 15 amp , power socket 15 amp , pvc pipe 1 inch , pvc bend 1 inch , pvc insulation tape , exhaust fan 12 inch , tarpin oil , distemper , paint brush * /bid number : gem/2026/b/7724200 + /dated: 30-06-2026 ' ' / bid document 1 / 37

CTN :45742480

10 Jul, 2026 NA

West Kameng - Arunachal Pradesh

Tender For supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , ply wood 8 ft , block board 8 ft , ply wood 6 mm , mirror for table dressing gents , plywood 7 ft , plastic laminated sheet , mirror for table dressing ladies , cushion for sofa , blaize cloth green , fevicol , cloth mal mal , nut bolt 15 mm , nut bolt 8 mm , fevicol sh , varnish , french polish , ra sienaa powder , cane plastic , turpentine oil , cane plastic 2mm , nails wire steel 25 mm , pegs brass 75 mm , nails wire steel 100 mm , cloath tapesty 48 inch , rexine cloth , nut bolt 20 cm , nails wire steel 50 mm , nails wire steel 40 mm , nails wire steel 80 mm , lakh dana , chandras gum , sand paper no 50 , ms screw wood 20 mm , lime brush , beeding pvc , ms screw wood 15 mm , ms screw wood 35 mm , beeding wooden , red oxide paint , pink primer , knob arcylic , sand paper no 80 , nut bolt 20 mm by 4 inch , ms screw wood 75 mm , ms screw wood 25 mm , beeding teak wood , ms screw wood 50 mm , painting brush 25mm , nails wire steel 65 mm , ms screw wood 45 mm , shoes pvc , locker bed side steel * /bid number : gem/2026/b/7724446 + /dated: 30-06-2026 ' ' / bid document 1 / 46

CTN :45742546

10 Jul, 2026 NA

Sonitpur - Assam

Tender For supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , plywood bwr 2400 mm by 1200 mm by 12mm , plywood bwr grade of size 8 ft by 4 ft by 18 19mm , plywood bwr grade of size 7 by 3 by 12mm 7 ply , plywood one side teak face bwr grade of size 8 ft by4 ft by4 mm , plywood bwr 8 ft by4 ft by6mm thick , pre laminated mdf board , foam cushion 100mm thick , hard wood well seasoned 10 feet by 3 inch by 2 inch , shellac , particle board pre laminated with one teak face , readymade top of peg table 450 by 300mm , well seasoned 2nd class hard wood scantling , block board 8 ft by 4 ft by19mm , varnish , cane plastic 2mm , lock for almirah 6 lever , continuous piano hinges 18mm by1 pt 8mtr , cloth tapestry 48 inch wide 600 gsm as per sample , sunmica 2400 mm by 1200 mm by 1mm , readymade top of table 3ft by 3ft of 900 by 900mm , tapestry cloth cover only for cushion 530 by560 by100mm , fevicol sh , cane plastic 4mm , readymade top of table 3ft by 2ft of 900 by600mm , pvc shoes for chair verandah , handle for almirah med 100mm steel , beading teak wood half round 9mm thick by 18 19mm wide 7 ft long , french polish , thinner for paint , paint red o byide , readymade top teapoy varandah 600 by450mm , spirits , readymade top of centre table 910 by 450mm , lock small for table , painting brush 25mm , painting brush 50mm , turkey umber powder , dendrite , emery paper no 80 , turpentine oil , grinder paper , pvc shoes round type heavy type , hard wood 2nd class well seasoned beading of size 6mm , pvc shoes sqaure type , raw sienna powder , painting brush 75mm , sand paper no 80 , fevicol type b * /bid number : gem/2026/b/7719726 + /dated: 30-06-2026 ' ' / bid document 1 / 43

Peg Table Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector