Latest percussion primer Tenders | Government percussion primer Tenders

CTN :45584909

30 Jun, 2026 45.00 Lacs

Jodhpur - Rajasthan

Tender For supply of various material and equipment at gram panchyat ps dhawa 2026-27 yearly rate contract - ghadla/kankar/jhajhra, mud mortar, quicklime (from kiln) for lime masonry work, cement, ppc, white cement, fine aggregate, sand/gravel, gravel – local, fly ash, surkhi (brick dust/powder), stone dust (for masonry work), stone/brick aggregate (for works other than road construction), 40mm stone aggregate (hand-broken grit) (deduct 1/11 for voids), 40mm stone aggregate (crusher-broken) (deduct 1/11 for voids), 20mm stone aggregate (crusher-broken), 12/10/6mm stone aggregate (crusher-broken), brick aggregate, materials for road work, 63-40mm hand-broken stone aggregate (deduct 1/11 for voids), 90-45mm hand-broken stone aggregate, quarry rubbish (deduct 1/6 for voids), gravel (deduct 1/6 for voids), kankar (deduct 1/11 for voids), binding material (pi 4-6) (deduct 1/6 for voids), brick (22.5 x 11 x 7.50 cm), first class, second class, soling / stone paving stone, random rubble (rr) masonry, coursed rubble (cr) masonry, stone soling (for flooring work up to 15 cm height), stone soling (for road/paving work, 23 cm height), jodhpur-type stone slab/strip/flagstone pieces (width 10-12", length 2-3', thickness 2.5-3.5"), stone slab/flake (flaky material) (3-4" thickness & length, 1-2" width) for soling, sandstone (dpc, sill, coping, lintel, shelf/tand, almirah, etc.), up to 25 mm thickness, 25-40 mm thickness, 40-50 mm thickness, 50-75 mm thickness, 75-100 mm thickness, 100-150 mm thickness, flagstone for flooring / slab paving, flagstone for flooring (up to 35 mm thick, min. 3 sq. ft. or more area) - jodhpur slab, flagstone for slab paving (60-75 mm thickness, min.) area of 3 sq. ft. or more (jodhpur chap), unpolished rough kota stone, up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, polished kota stone (single-side polished), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, marble stone (makrana adanga, 20mm thick), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, marble chips, marble powder, marble stone (rajnagar grade ii/local, 20mm thick), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, stone door frame, single rebate size 100 x 75 mm, double rebate size 125 x 75 mm stone slabs, up to 1.5 m length, minimum 40 mm thick, 1.5 m to 2.40 m length, minimum 50 mm thick, 2.4 m to 3.0 m length, minimum 65 mm thick, above 3.0 m length, minimum 75 mm thick, precast tiles / blocks, glazed: size 30x45 cm, mosaic: 40 mm thick, vitrified: size 60x60 cm, interlocking tiles/bricks/blocks for road work, cement interlocking block (m-30 grade), 60 mm thick, cement interlocking block (m-30 grade), 80 mm thick, cement interlocking block (m-30 grade), 100 mm thick, local wood with fittings (for doors, windows, and furniture), mango, mirandi/kapoor, babool, others: ghana teak, factory-made doors (30 mm thick, solid core, single leaf), structural steel, iron (tor steel fe 415/500 for reinforcement), binding wire (18 gauge), iron girders, angle iron/square bar/flat strip/angle iron, barbed wire (sizes: 12g wire & 12g strand / 12g wire & 14g strand / 14g), mesh/jali, iron mesh (24 gauge, 14 mesh), cement concrete jali (40 mm thick), glass, 3 mm thick glass, paints, enamel paint, distemper, lime - for whitewashing (aras / quicklime), primer, petroleum products, diesel (hsd), mobil oil (engine oil), bitumen/shalitex board, plain sheet sheets, gi sheet 22 gauge (0.80 mm), gi sheet 24 gauge (0.63 mm), ms sheet 22 gauge (0.80 mm), ms sheet 24 gauge (0.80 mm), corrugated sheet, gi sheet 1 mm thick, gi sheet 22 gauge (0.80 mm), asbestos cement sheet 6 mm (2.5/2.75 x 1 m), other sheets, pvc sheet 1 mm thick (colored/plain), green-yellow 'lite-roof expo' sheet (183 x 90), pipes, gi 15 mm diameter (b class), gi 20 mm diameter (b class), gi 25 mm diameter (b class), ac 75 mm diameter, ac 100 mm diameter, pvc 90 mm diameter (with ring), pvc 110 mm diameter (with ring), pvc 140 mm diameter (with ring), pvc 110 mm (2.5 kg/sq. cm

Corporations And Associations And Others

CTN :45523190

19 Jun, 2026 4.76 Lacs

Delhi - Delhi

Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm

Corporations And Associations And Others

CTN :45523194

19 Jun, 2026 4.67 Lacs

Delhi - Delhi

Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt

State Government

CTN :45564663

25 Jun, 2026 50.00 Lacs

Sawai Madhopur - Rajasthan

Tender For supply of various good and materrials in gram panchayat maksudanpura under all schemes- ghadla/kankar/jhajhra , mortar/mud mixture, , kali kiln lime for lime masonry work, , cement, , ppc, , white cement, , fine aggregate, , sand/gravel, , gravel - local, , rakhi (fly ash), , surkhi, , stone dust (in masonry), , ballast stone/brick (for other than road work), , 40mm measuring stone (hand-broken grit) (voids carte 1/11), , 40mm grit stone (crushed) (cut voids 1/11), , 20mm grit stone (crushed), , 12/10/6mm grit stone (crushed), , brick mortar, , material for road work (including 5 km lead), , 63-40 mm crusher broken stone crushed (cut voids 1/11), , 63-40 mm hand-broken stone aggregate (voids cart 1/11), , 90-45 mm hand-broken stone aggregate (voids cart 1/11), , quarry rubbish (cut the voids 1/6), , gravel (voids cart 1/6), , conker (voids cart 1/6), , binding material (pi 4-6) (cut voids 1/6"), , brick (22.5 x 11 x 7.50 cm), , first class (ist class), , ii class, , soling / kharanja / masonry stone, , chinnai berdha (rr), , masonry rubble (cr), , kharanja soling (for floor work up to 15cm height), , kharanja soling (23cm height for road kharanja work), , jodhpuri type stone slabs/arches/slabs (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material (3-4" thick & length and width 1-2"), , sandstone (dpc, sill, coping, lintel, tand, almirha etc.), , up to 25mm thickness, , up to 25-40mm thickness, , up to 40-50mm thickness, , up to 50-75mm thickness, , up to 75-100mm thickness, , up to 100-150mm thickness, , flooring / patti patan katla stone, , floor slabs upto 35mm thick, min, 3 sqft or more area, , katla for patti patan 60-75mm thickness, min, 3 sqft or more area, , unpolished rough kota stone, , up to 900 sq cm, , - 901 to 2300 sq cm, , more than 2300 sq cm, , polished kota stone (one side polished), , up to 900 sq cm, , = 901 to 2300 sq cm, , more than 2300 sq cm, , marble stone (makrana adanga 20mm thick), , up to 900 sq cm, , = 901 to 2300 sq cm, , more than 2300 sq cm, , marble chips, , marble powder, , marble stone (rajnagar || quality/local 20mm thick), , up to 900 sq cm, , - 901 to 2300 sq cm, , more than 2300 sq cm, , stone frame, , single pattern size 100 x 75 mm,, , double patam size 125 x 75 mm,, , stone slabs, , up to 1,5 m length, minimum 40mm thick, , 1.5 m to 2.40 m length, minimum 50mm thick, , 2.4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles/blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , cement interlocking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core cable isi marked, , 1.50 sq mm, , 2.50 sq mm, , 0,50 sq mm, , 1,00 sq. m,, , 4.00 sq mm, , 6.00 sq mm, , local wood with fittings (for doors, windows and furniture), , mango, , acacia, , other, , factory made doors (30 mm thick, solid core single pane), , structural steel, , iron (or steel fe 415/500 for reinforcement), , winding wire 18 gauge, , iron guard, , conical iron/squared bar/patti/angle iron, , barbed iron wire (size 12 guage wire and 12 guage strad/12 guage, , wire and 14 guage strad/14 guage, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky patal 40mm thick, , glass, , 3mm thick glass, , color paint, , inamil paint, , distemper (water bound), , for lime-plastering (aras / bud), , primer (for iron/wood), , petroleum products, , diesel hsd, , mobil oil, , bitumen shalitax board (25 mm thick), , plain sheet, , gi sheet 22 gauge (0.80 mm), , gi sheet 24 gauge (0.63 mm), , m.s. sheet 22 gauge (0.80 mm), , m.s. sheet 24 gauge (0.63 mm), , corrugated sheet, , gi sheet 1 mm thick, , gi sheet 22 gauge (0.80 m.m.), , asbestos cement sheet 6mm(2.5/2.75x1m), , other sheets, , pvc sheet 1 mm thick (coloured/plain), , green yellow literoof expo sheet (183x90)

State Government

CTN :45502939

19 Jun, 2026 4.65 Lacs

Perumbavoor - Kerala

Tender For work includes new toilet near verandah of high school block and ramp.estimate includes dr foundation, rr basement, solid block masonry, rcc roofing, ceramic floor and wall tiles,vitrified tile primer painting fittings rcc septictank waste pit etc

CTN :45484439

19 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of supply installation testing and commissioning of 58.5 kva under job no 2561 as per store list att , cement 43 grade opc packed in hdpe bag each 50 kg wt conforming to is 8112 1989 , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , hard core 40 to 63 mm graded , stone for rr masonry less than 6 inch , pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50 mm thick an colour having a tensile strength , ms pipe med grade 50mm dia confirming to is 1611 1998 , painting brush 4 inch , anti corrosive red oxide zinc chromate primer , synthetic paint enamelled og , thinner , self driving screw for ppgi sheet , iron welding rod , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5m long , on load change over switch within sheet steel enclosure , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of , cable xlpe insulated screened pvc bedded galvanised steel strip or wire armored electric power cable heavy duty 1100 volts grade , switch piano 5 amp 230 volts flush type one way , switch socket combination , led tube light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete , screw full thread 6x19 mm isi marked , pvc switch board snow white of size , ceiling rose three terminal , pvc round squire block , distribution box 4 way double door spn 240 volts copper bus bar and neutral link earthing stud , service cable pvc insulated aluminium conductor 1100 volt grade heavy duty served with inner sheathing of pvc tap and overall pvc sheathed , earthing plate 600x600x6mm galvanised steel suitable for gi strip fittings, drilled with two nos holes for 6 mm dia near one side , ci earthing pit cover of size 300x300x6mm with angle iron isa 20x20x3mm thick ms frame , funnel fitted with 20mm dia gi pipe 1.5m long , galvanized iron strip 32 x 6 mm , charcoal , salt normal , cement 43 grade opc packed in hdpe bag each 50 kg wt //bid details 2 / 32

State Government

CTN :45482296

13 Jun, 2026 49.9 Thousand

Nadia - West Bengal

Tender For notice for the vbgram materials supply - supply of first aid box including medicines (specified by pia) at, model citizen information board for ibs( specification-made of, with a height of 3ft, width 2ft and thickness of 4 inch & 30 degree, head with pentagonal shape including fixing the mgnrega, biswa bangla logo in upper side of the board and supply in, mgnrega worksite anywhere., model citizen information board for community (specification-, of brick structure with plastering and colour ( back colour, and black for writting) with a height of 4ft, width 3ft and thickness, 4 inch & 30 degree in head with pentagonal shape including fixing, the mgnrega and biswa bangla logo in upper side of the board, supply in the mgnrega worksite anywhere., g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size, mmx47 mm with a wall thickness of 5 mm, made out of extruded, mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated, factory made solid panel pvc door shutter consisting of outer, made out of m.s. tubes of 19 gauge thickness and size 19 mmx19, mm for styles, top and bottom rails, m.s. frame shall have cost, steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame, made of flat bent bar, end bifurcated with necessary screws etc., cement concrete(1:2:4) as per direction. (cost of concrete will be, paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured, from extruded section conforming to i.s. specification (i.s. 205/66), and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x, 4.0mm, anodised aluminium barrel / tower / socket bolt (full covered) of, approved manufactured from extruded section conforming to i.s., 204/74 fitted and fixed with cadmium plated screws: (vi) 200mm, long x 10mm dia. bolt., anodised aliminium d-type handle of approved quality, manufactured from extruded section conforming to i.s. specification, (i.s. 230/72) fitted and fixed complete: (a) with continuous plate, base (hexagonal/ round rod) (iii) 100 mm grip x 12 mm dia rod., (c) supplying 6 levers 'godrej' crystal satine mortice lock with keys, including fitting & fixing complete., i) iron hasp bolt of approved quality fitted and fixed complete, (oxidised) with 16mm dia rod with centre bolt and round fitting. (, 200mm long, door stopper.(brass), red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings, conforming to is-13592-1992 (a) (i) single socketed 3 meter length, (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings, conforming tois:13592-1992 with all necessary clamps nails,, including making holes inwalls, floor etc. cutting trenches in any soil, through masonry concrete, structures etc if necessary and mending good damages including, joining withjointing materails (spun yarn, valamoid/bitumen/m-seal, etc) complete. a) upvc pipes: (ii) 110 mm. dia., s, d) shoe (ii) 110 mm. dia, qgs seed(10 variety), g.i. hollow pipe squre or

CTN :45442671

19 Jun, 2026 10.00 Lacs

Palakkad - Kerala

Tender For material supply for works in mgnregs action plan - material supply for mgnregs individual and common asset creation - stone aggregate:40mm nominal size, stone aggregate:20mm nominal size, stone aggregate:10mm nominal size, stone aggregate:06mm nominal size, course sand(zone3), portland cement, concrete mixer, vibrator, stone for masonry work, twisted steel/deformed bars, structural steel such as tees,angles,channels and r.s joists, second class kail wood in planks, second class kail wood in scantling, wall form panel 1250*450mm, corner angle 45*45*5mm 2.5long, column clamp 450*1070mm, prop 2m(2-3.5m), laterate stone of size 40*20*15cm, solid block of size 30*20*15cm, mild steel plates, mild steel rivets, flats up to 10mm in thickness, 20 mm dia.holding down bolts, mild steel sheets for tanks, galvanised wire mesh, iron pintels including welded pin, mild steel sheets with bolts and nuts, mild steel hooks, gi trafford profile sheet 0.35mm thick, galvanised steel jor l hooks 8 mm dia, galvanised steel bolts and nuts 6mm dia and 25mm long round head with slots, wire nails, fine sand, pvc pipe 63 mm outer dia., pvc bend 63 mm dia., pvc pipe 110mm outer dia., pvc elbow 63 mm dia, pvc tee 63*63*63 mm dia, pvc end cap 63 mm dia, pvc reducer 63*50mm dia, pvc pipe 160mm outer dia., gi pipes 50 mm dia., gi pipes 40 mm dia, quarry waste, precoated galvanised plain ridge, vitrified floor tile 60*60cm, welding by electric plant, hire charge of 10hp engine and pump set, diesel oil, 200 mm aluminium aldop, pvc socket/coupling 63 mm dia, polythene water storage tank, red oxide zinc chromate primer, deharadun white lime, smooth wheeled roller 8 to 10 tonne, water tanker 5 to 6 kl capacity, interlocking c.c. paver block (80 mm thick, m-30), sundries

CTN :45161541

08 Jun, 2026 50.00 Lacs

Palakkad - Kerala

Tender For corrigendum : supply of material for mgnrega - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, stone aggregate(single size): 10 mm nominal size, solid blocks of size 10x20x15cm, solid blocks of size 30x20x15cm, twisted steel/deformed bars, royality of good earth, red oxide zinc chromate primer, quarry waste, mangalore tile 20mm thick, mangalore ridge tile 20mm thick, fine sand (zone iv), galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm, mild steel hot finished welded type, welding by electric plant, average rate of mild steel round bars for reinforcements, galvanised steel j or l hooks 8 mm dia, bitumen washer, pvc socket /coupling 63mm dia, precoated aluminium trafford sheet 0.350mm thick

CTN :45416190

11 Jun, 2026 30.00 Lacs

Palakkad - Kerala

Tender For ananganadi grama panchayath ,vendor selection for supply of various mterials for mgnregs - quarry waste, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, fine sand (zone iv), coarse sand (zone iii), gravel 5mm to 10mm, stone for masonry work, portland cement, m.s. tube 40 mm dia, mild steel tubes hot finished welded type, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, mild steel sheets with bolts and nuts to rest on pintels, iron pintels including weldded pin, mild steel sheets for tanks, mild steel hooks, mild steel plate, mild steel tubes electric resistant or induction butt welded, welding by electric plant, wire nails, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, flats up to 10 mm in thickness, galvanised wire mesh of average width of aperture 1.4 and nominal dia.of wire 0.63 mm, g.i trafford profile sheet 0.35mm thick, precoated aluminium traffored sheet 0.450 mm thick, structural steel such as tees,angles,channels and rs joists, stainless steel screws 50 mm, red oxide zinc chromate primer, precoated galvanised steel plain ridges, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates, g.i pipe 40mm dia, gi plain washer thick, twisted steel/deformed bars, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charge of 10 hp engine and pump set - materials, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), adjustable span eso+si (2.35-3.40), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, solid blocks of size 30x20x20cm, solid blocks of size 30x20x15cm, hollow blok of size 40x20x10cm, interlocking c.c. paver block (80 mm thick, m-30), pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 25 mm outer dia . 12 kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 20 mm outer dia 10 kfg/cm2, pvc pipe 63 mm outer dia . 4kgf/cm2, pvc pipe 32 mm outer dia 6kgf/cm2, pvc pipe 40 mm outer dia. 6kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm2, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc pipe 160 mm outer dia. 4kgf/cm2, pvc elbow 75 mm dia, pvc 45 degree elbow 75 mm dia, pvc socket/coupling 75 mm dia, pvc reducer 63x50 mm dia, pvc vent cowl 75 mm dia, vitreous china orrisa type w.c. pan size 580 mm, brass stop-cock 15 mm dia, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type water closet, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, c.i. bracket for wash basin and sinks, polyethylene water storage tank with cove

Percussion Primer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Corporations And Associations And Others

State Government

State Government

State Government