Latest perforated sheet Tenders | Government perforated sheet Tenders

CTN :45555702

23 Jun, 2026 NA

Patiala - Punjab

Tender For supply of pleated dust collection filter cartridge, specifications:- item:- pleated air filter cartridge, size:-325 mm dia x 1000 mm long, top:- 3 lug aluminum casted flange, inner :- g.i. perforated sheet, bottom:- g.i. cap, media:- spun bonded polyster 260 gsm, area:- 10 sq. mtrs(104 pleats x 48 mm pleat depth), gasket:- bottom of flange [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45556914

19 Jun, 2026 NA

Chittaranjan - West Bengal

Tender For supply of aluminium perforated sheets, flats & trim angles for flat cab of wag-9hc twin locomotives as per drg.no. as per category no. t/9/0054 specn: clw/ms/3/072 alt.9 or latest, clw/ms/3/075 alt.8 or latest & clw/ms/3/074 alt.13 or latest. [ warranty period: 30 months after the date of delivery ] ]

CTN :45559730

30 Jun, 2026 95.3 Thousand

Bareilly - Uttar Pradesh

Tender For supply of 1old dhoti , 2boiler gauge glass , 3emery cloth fine , 4canvas flat belt , 5rustolene , 6anabond , 7anabond , 8emery paper rough , 9holdite , 10emery tape , 11grinding paste rough , 12grinding paste fine , 13split pin , 14split pin , 15m. seal , 16blue tube , 17brasso paste , 18steel wire brush , 19emery tape , 20rubber adhesive , 21grinding wheel , 22hexa blade , 23belt fastener , 24grinding wheel , 25ms perforated sheet , 26graphite powder , 27hylem sheet , 28cotton waste

State Government

CTN :45516075

22 Jun, 2026 6.90 Lacs

Ferozepur - Punjab

Tender For providing and supplying furniture in integrated public health lab at district hospital ferozepur civil works furniture - almirah 20 gauge sheet heavy duty made with ms sheet size 36x78x18 duly powder coated with multipurpose shelves, heavy lock superior quality, table size 6x3 made with 19 mm thick ply + 1mm sunmica with 1 side drawer and cabinet duly polished heavy locks with footrests, counter size 8x2 operate for 2 persons made with19 mm ply + 1mm sunmica with footrests and shelves for documents with one drawer for each person, waiting area chair 3 seater- supplying & placing three seater bench. the seat and back shall be made up of high quality cold rolled ms perforated sheet of 1.2mm thick, pressed and welded to form the shape. the seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin. the armrest shall be made up of mild steel powder coated tube with 1.2mm thick. the base structure shall be supported by ms powder coated with 40-60 (dft). there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 440 10 mm(d) x 405 10 mm(h) from ground. overall height shall be = 775 10 mm, overall depth = 710 10 mm & overall width = 1765 10 mm., revolving chairs long back with tilt mechanism with arm rest(leather finished, hydraulic, with five castors, nickle polish base)

Central Government/Public Sector

CTN :45486728

12 Jun, 2026 NA

Chittaranjan - West Bengal

Tender For supply of aluminium perforated sheets, flats & trim angles for flat cab of wag-9hc twin locomotives as per drg.no. as per category no. t/9/0054 specn: clw/ms/3/072 alt.9 or latest, clw/ms/3/075 alt.8 or latest & clw/ms/3/074 alt.13 or latest. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45471050

29 Jun, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of set of aluminium chequered sheet for lhb scn coaches, as per planning list number: mplacsscnab version 0. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45431562

12 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot non ferrous scrap - 98230013 scrap released aluminium, mixed aluminium and aluminium casting mixed items such as different types of frames, jali, patti, moulding, avm,aws, door closer,dome cover, boxes, sheet, pipes, wire,arms, junction box,chequered plate, and other aluminium items at this location with or without major /minor attachments of ferrous, non ferrous, fibre, fibreglass, cloth, pvc, rubber, sponge, glass, glass wool, coal tar etc. with or without rust, dust, oil, cement, mud, wet and grease.un serviceable to railway use loading by purchaser. note: bidders are advised to see the lot physically . delivery will be made as on as it basis.

State Government

CTN :45415906

10 Jun, 2026 NA

Birbhum - West Bengal

Tender For local market rate for construction items materials of labpur dev. block jurisdiction of fy-2026-27 (including all taxes). - laying and jointing pvc pipe. heading, welding by electric plant, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), modular fly ash bricks, fly ash bricks(traditional), coloured inter locking c.c. paver block, moorum, fine sand, medium sand, coarse sand, coarse sand, portland cement, white cement, water proofing materials, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ), grade 1 stone metal 63 mm to 45 mm, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble), ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, bitumen vg-30, bitumen emulsion, coal tar, diesel oil, sal silliguri -in/c labour cost, sal malaysia-in/c labour cost, neem wood -in/c labour cost, other local wood -in/c labour cost, ordinary teak wood -in/c labour cost, sisu/gamar wood -in/c labour cost, local sal wood -in/c labour cost, bamboo (8cm-10cm dia) including fixing, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), malayasia sal cleat, wood dust, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, supplying solid flush type doors of commercial quality, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, anodised aluminium hanging type door stopper, brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, ms integrated grill for steel window and ventillator, two point nose steel handle, openable steel windows as per is sizes with side hung shutters and horizotal glazing bars., top hung side hung ventillator, fixed type ventilators as per i.s. sizes with horizontal glazing bars h

CTN :45192099

10 Jun, 2026 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For corrigendum : supply of hardware items - hardware items, chequered plywood, size: 16mm, 8 feet x 4 feet, front laminated windshield glass, thickness: 6mm, 4 feet x 3 feet, aluminium chequered sheet, size: 8feet x 4 feet, thickness 4mm, cowl halves assy rhs,1512c bs3, pop rivet,size: 3/16*1 inch, driver set assy, mesh type, aluminium angle, size 32*32*5, cushion (rest), size: 2 inch x 3 feet x 6 feet, cushion for seat, size 4 inch x 3feet x 6 feet

State Government

CTN :45382897

08 Jun, 2026 13.48 Lacs

Faridabad - Haryana

Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

Perforated Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

State Government

State Government