Get complete information related to latest Pet Tray Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pet Tray Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pet Tray Tenders.
Tender For supply of vestibule bellow top complete for gangway of lhb type coaches as per icf drg. no. lwscz ac-2-5-005, alt-nil or latest with bellow securing fasteners item no. 8(qty 04 nos.), item no.9 (qty 04 nos.), & item no. 10 (qty-04 nos) of drawing. no. lwsczac-2-5-002. note: (a) packing condition: coverd in trans parent polythene and packed in suitable length wooden case as shown in icf drg. no. icf/sk-2-5-090 (b) it em should be procured from approved vendors as per rcf item id-2400023 (c) material conforming to rds o spec. no. rdso/2007/cg-05(rev-1) or latest. [ warranty period: 60 months after the date of delivery ]
Tender For construction material and structural material of a at shelter c c - 2400 mm , sunshades of size 1500mm x 500mm shall be provided for outside windows oblique doors , eaves board as per requirement will be provided in each shelter as shown in drawing , foundation bolt 25mm dia and 600mm long welded with bottom anchor plate of size 250mm x 250mm x 10mm and fixed with bottom base plate of column using nuts and bolts , anchor fastner as ms tubular hooks of dia 100 mm and thickness 16mm , nut bolt of size 12mm dia 75mm long with washer , nut bolt of size 12mm dia 125mm long with washer , nut bolt of size 12mm dia 150mm long with washer , rivet full size , self tapping screw 100 mm long , self tapping screw 75 mm long , star screw 15mm long , star screw 25 mm long , star screw 75mm long , auto rechargable led tube light complete set 20w 4feet long with electronic choke , auto rechargable led bulb 15w , angle holder , modular switch piano and flush type 5 amp , bulk head fittings with 8w short body cfl , pvc switch board 8 x 10 inch isi mark , pvc switch board 6 x 4 inch isi mark , pvc casing and capping of size 25 mm , pvc casing capping tee bend , pvc casing capping l bend , wire single core copper conductor 1 point 5 sqmm , wire two core copper conductor 6 sqmm , mcb 10 to 32 amp sp , pvc square box 4 x 4 inch , insulation tape one and half x 25 mtr with isi mark , ceiling rose , change over switch 32 amp , star screw full thread 20 mm each pkt 320 , gi wire 14 swg , earthing of building will be provided using 4mm dia gi set earth wire connecting to main board to gi earth plate of size 60cmx60cmx6mm thick , lightening conductor made of copper tube 1500mm long x 25mm dia with five copper prongs of length 150mm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , solar street light 25w including pole having length 5 mtr long and 75mm dia and complete accessories warranty for street lighting system including battery min 2 years , provision of fire extinguisher 6 kgs abc dry powder stored pressure type , locking arrangements with 16mm iron tubular rings of dia 100mm to be provided and fixed in floor , cgi sheet 3000x900mmx0 point 60mm of isi mark , gi pipe 2400mm long and 50 mm dia and 1 point 5mm thick , pvc pipe 110 mm dia , pvc tee 110mm dia , pvc elbow 110 mm dia of isi mark , pvc socket 110 mm dia , pvc bend 110mm dia , riveting machine with 100 rivets as per isi specification , pan motor tasala 18 inch dia , showel with wooden handle , axes picks 03 kg head with handle , wire mess for seving sand 8 x 5 feet , trowels as per isi mark , brick hammer 500 gm with handle , water level pipe for mason 100 mtr long , sprit level , plum bob steel , nylon mason thread 100 mtr long , measuring tape 05 mtr retractable grade ai 16 , safety helmet , gum boot , hand gloves rubber , drilling machine portable , steel oblique wood cutter circular saw , cutting blade 4 inch steel , cutting blade 14 inch steel , hexa blade 350 mm long isi 1st quality , welding rod , welding goggles , welding gloves
Tender For corrigendum : supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 , stone aggr
Tender For corrigendum : supply and application of insulation materials on pipe, equipment for part a and part b as per standard specification by providing all required materials in connection with the composite work for setting upof hpg-2, butene-1 and psa units atlepetkata - legends / notes for insulation workstypes of insulation : ih = insulation for heat conservation it = insulation for steam traced lines is = insulation for personal safety ic = cold insulation for anti-condensation ie = insulation for electrically traced lines ij = insulation for jacketed lines ik = insulation for dual insulated lines basic line surface materials : cs = carbon steel (including lt carbon steel), as = alloy steel, ss = stainless steelnotes :1. for insulation type it,tracer size and tracer numbers shall be as per specification.2. insulation thickness for ic where insulation material is poly urethane foam (puf) / poly isocyanurate (pic) + cellular glass includes outer layer of 50mm of cellular glass and inner layer of balance thickness of puf/pic.3. insulation for ie consists of inner layer of rockwool and outer layer of puf / pic. the thicknesses have been specified as thk(i) and thk(o) for inner and outer layers respectively., part a, hot insulation (units)providing thermal insulation including supply of all insulating and ancillary materials, vapour barrier, weather protective coverings, consumables and other necessary materials , testing of materials as required, including transportation of materials to work site, duly inspected by 3rd party inspector(llyods/bv/dnv or any other client approved party) at manufacturers shop & sample check/inspection at site by eil construction inspector, applying insulation on surfaces as specified including all preparatory work there on, binding, tying, lacing, stitching and/or otherwise securing , finishing with sheet cladding as per spec. , providing bolts, rivets, and self tapping screws wherever specified , providing inspection windows, end seals for flanges etc., colour coding and identification. providing steel scaffolding, all tools , tackles , equipments etc. , labour, supervision and completing the work in all respect, at all heights as per drawings , specifications and instructions of engineer-in-charge. (refer legend for applicable eil specification), insulation type : ih ; surface material : cs & as ; operating temp. range : upto 125 (deg c) ; insulation material : rockwool, pipes, nb 00.75 inches; thickness 25 mm, nb 01.00 inches; thickness 25 mm, nb 01.50 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, nb 03.00 inches; thickness 25 mm, nb 04.00 inches; thickness 25 mm, nb 06.00 inches; thickness 25 mm, blind flange assemblies, nb 00.75 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, valve assemblies, nb 00.75 inches; thickness 25 mm, insulation type : ih ; surface material : cs & as ; operating temp. range : 126 (deg c) to 350 (deg c) ; insulation material : rockwool, pipes, nb 00.50 inches; thickness 25 mm, nb 00.50 inches; thickness 40 mm, nb 00.75 inches; thickness 25 mm, nb 00.75 inches; thickness 40 mm, nb 00.75 inches; thickness 50 mm, nb 01.00 inches; thickness 25 mm, nb 01.00 inches; thickness 40 mm, nb 01.00 inches; thickness 50 mm, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 40 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 02.00 inches; thickness 65 mm, nb 03.00 inches; thickness 25 mm, nb 03.00 inches; thickness 40 mm, nb 03.00 inches; thickness 50 mm, nb 03.00 inches; thickness 65 mm, nb 04.00 inches; thickness 25 mm, nb 04.00 inches; thickness 40 mm, nb 04.00 inches; thickness 65 mm, nb 06.00 inches; thickness 40 mm, nb 06.00 inches; thickness 65 mm, flange assemblies, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 03.00
Tender For periodical services(internal) including repairs to flooring,sanitary and plumbing items works in otm and md accn at ridge, raulki area under age b/r-i of ge satwari - notes : (1) work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions., taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each and removing from the site complete all as specified & directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed., demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed., taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed., dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed, s&f pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick bwp commercial plywood .the size of rail and stiles as per is: 1003(part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed., s&f factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed, m&l for 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed., s&f in repair solid pvc door frame of size 50mm x47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifi
Tender For providing of custom bid for services - load adjustment of over loaded wagons & making even (by distribution of material) of unevenly loaded wagons of loaded rakes, rake checking and securing wagon doors at nmdc kirandul railway yard
Tender For load adjustment of over loaded wagons & making even(by distribution of material) of unevenly loaded wagons of loadedrakes, rake checking and securing wagon doors at nmdc kirandulrailway yard is manpower supply with fixed service charge.
Tender For supply of securing cup dia 160 x 40mm as per drawing: emu/m-0-2-007 alt 'n' for motor coach & hcc. material and specification as per drawing [ warranty period: 30 months after the date of delivery ]
Tender For diagnostic and therapeutic items for cardiac cath lab (group b) - manifold with two side ports for ptca (fda/ce approved), manifold with three side ports for ptca (fda/ce approved), teflon coated guide wires (j-tip & straight-tip) standard length-145 or 150cm (fda/ce approved), teflon coated guidewires(j-tips & straight-tip) exchange length-260 or 300cm (fda/ce approved), femoral introducer sheath with puncture needle for adults (sizes 5 - 11 fr.) standard length; 10-16-25 cm long; 0.021 or 0.025-inch guide wire compatible. material of sheath tubing should be made of etfe, cross cut valve should be made up of silicon rubber & should have silicone coating. dilator tube should be made up of polypropylene and should have silicon coating. must have with haemostatic crosscut valve; with integrated side arm with attached 3-way stopcock; with suture eye for securing sheath and click sound; kink resistant. must have with dilator-hub lock mechanism to prevent its back-out during insertion; pack must include with or without metallic needle usfda approved, long introducer sheath (20-50cm long) (fda/ce approved), extra-long introducer sheath (>50 cm) (fda/ce approved), radial introducer kit with puncture needle for adults (sizes 5 - 7 fr.) standard length 7 cm long; 0.035 or 0.038-inch guide wire compatible, include surflash 20g*2 entry needle (plastic iv catheter) and 0.025 mini plastic guidewire must have etfe sheath tubing, dilator tube should be made up of polypropylene and should have silicon coating.should contain a haemostatic crosscut valve to prevent back leak of blood and aspiration of air; with integrated side arm with attached 3-way stopcock., trans radial coronary diagnostic catheter (us fda approved) of various lengths, syringe for pressure injector-150ml with pressure tubing compatible with the available system in the cath lab(medred-mark-7) arterion, high pressure connecting tubing up to 50 cms long for pressure syringe, a). coronary diagnostic angiography catheter(judkins type- left and right) (us fda, b). coronary diagnostic angiography catheters ( judkins type) europeance approved), a). diagnostic coronary angiography catheter(amplatz type- left and right) (us fda), b). diagnostic coronary angiographic catheter ( amplaz type left & righce approved), pigtail catheters (fda/ce approved), short pigtail for pericardiocentesis, diagnostic multipurpose catheters (fda/ce approved), nih catheter (fda/ce approved), ima catheter (fda/ce approved), ptca inflation device-analog display (balloon inflationdevice analog display, 30 atm pressure with tubing and 3way stopcock) (fda/ce approved), y-connector set with extension tubing tuohy burst, pci,needle and 3-way, special y-connector set with both fixed and haemostaticvalve with upto 10 fr inner diameter, pci needle with/without torquer device, disposable plastic sterile luer lock syringer for angiography and ptca (leur lock), large lumen ptca guiding catheters of 5 to 8 fr sizes-fda approved, large lumen ptca guiding catheters of 5 to 8 fr sizes-ce approved, brk needle (fda/ce approved) for paediatrics/adults, embolic protection (distal protection) device (epd) for ptca (fda approved), embolic protection (distal protection) device (epd) for ptca (ce approved), manual thrombosuction catheter for ptca (fda approved), manual thrombosuction catheter for ptca (ce approved), radial artery compression device, cross over arterial sheaths(fda approved), snare loop (fda approved), snare loop (ce approved), micro grabber (fda approved), micro grabber(ce approved), intra vascular retriever snare of various sizes with single foldable loop, intra vascular retriever snare-two loops (gooseneck type), intra vascular retriever snare-three or more loops (gooseneck type), pericardiocentesis kit (fda/ce approved), pigtail catheter with multiple markers (fda approved), rotalink plus system, rotalink pro system, rotalink guidewire, intracoronary pressure wire (ffr) for ptca-compatible with