Latest petroleum testing machine Tenders | Government petroleum testing machine Tenders

State Government

CTN :45274161

01 Jun, 2026 12.50 Lacs

Chhindwara - Madhya Pradesh

Tender For supply of laboratory equipment and others materials for existing, accredited district water testing distt. laboratories of division chhindwara - external calibration of laboratory equipment refrigerator/ , visi cooler rtd probe with sensar, glass thermometer, thermometer, wet and dry , thermometer, balance, analytical weight box,ph meter, tds meter, turbidity meter through iso/iec 17025:2017 accredited calibration laboratory with calibration certificate , smart uv-vis spectrophoto meter; 2206 touch screen uv-vis spectrophoto meter, wavelength range 190-1100 nm, accuracy + 1.0 nm, resolution 1.0 nm, bandwidth 1.0 nm. cuvette holder 50 mm path length. with display, with two years amc. with calibration certificate of control of absorbance, resolution power, limit of stray light. light source xenon flash lamp/tungten lamp/ deuterium lamp. to be supplied with 2 pairs of quartz cuvette. size 10 mm. including cost of supply, installation & training to lab staff for making graph of iron, nitrate, flouride, maganese test at nabl accredited lab with certificate. (nabl ceritified) make systronics , color comprator for color analysis , hot plate: rectangular body- heating upto 300'c are fitted with insulated elements. workable on 220/230 volts a.c. surface with cast iron top 300x450x150 mm rating 2 km with digitally , bacteriologycal incubator (memmert type with digital controllar): double walled, outer made of gi/ms powder coated. element of three sides' ss chamber digitally controlled temp. range 5'c above rt to 70 c + 0.5'c fitted with fan having double viewing sindow, supplied with shelves workable on 220/230 volts a.c. size 455x445x455 mm deluxe model with nabl certificate , ion meter versastar banch top modal (ph/ise)with flouride combination, epoxy body electrode with range form 0.01 mg/l ph ross electrode bnc connector, power syplly card opration manual, usb cable, universal ac power adaptor 90-260v ac electrode holding stand, stirrer (1) one pack flouride filling solution 475 ml (2) flouride standard 100 ppm 475 ml solution (3) flouride electrode storing solution 475 ml x 2 no (4) tisab iii solution 475 ml x1 including cost of supply, installation & training to lab staff for making graph of iron, nitrate, flouride, maganese test at nabl accredited lab with certificate. (nabl ceritified lab) , fluoride electrodes (combination fluoride electrode epoxy body with bnc connector) thermo orien -960913 nwp , monoquartz distillation unit-3362 dist. water output cap. (approx) 4.0 lt.hr/ electrical requirements 230-250 volts single phase 3.5x 2kw quartz heater/minimum cooling water requirment 2.5 lit/ min (ea)/ biological activity pyrogen free/ conductivity s/cm <1 x 10-6/ distillate temp 65-75'c , plate colony counter model no. cc-100 220 woult 1 year worenty measurement range 0 to 999 semi autometic precise colony counting metal plastic , laboratry refrigerator rlr-300 cooling type frost free temp. rang 2'c to 8'c glass dour 1, width 584, depth 584,hight 1702,220-240 woult 50 hz singal face , sampling bottel capicity 1 itr , membran filter assembley 5360 all galss filter holder 47mm filtretion assembley made for borosilcate glass with filter base capicity-21tr , spare for all glass filter holder 47mm dai capicity 2000ml for filter holder . tissu paper roll 3 layer

State Government

CTN :45275049

05 Jun, 2026 14.76 Lacs

West Tripura - Tripura

Tender For providing security guard for 24 hours in 3 shifts for guarding the o/o the c.e.,pwd(dws),dws circle agartala,rig division, wsso, state water testing laboratory at agartala with agencies name embedded uniform and others equipment for the year 2026-27

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

CTN :45294459

30 May, 2026 6.87 Lacs

Ananthnag - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of equipment allied accessories for restoration of awlrs at stations namely doodhganga nallah, sukhnag nallah, sindh nallah, ferozpora nallah, wullar at ningli,river jhelum at asham - data logger xlink 500 without modem with 4 analogue channel, sdi-12 port/ rs 232, rs 485 ports and digital inputs compatible with existing equipment (radar water level sensor ott rls output sdi-12 rs-485 (using sdi 12), or 4-20ma), cell modem (smart modem bn300- lte) for existing data logger (sutron 9210/8310), gprs antenna with accessories, gprs antenna with jumper cable, installation charges (to be done vide the amc already in place

CTN :45077014

22 May, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : e – tender for the purchase of medical college equipment for directorates of medical education, government of chhattisgarh - barometer (mercury based instruments to be replaced with other alternatives), filter, pasteur chamberland, complete set, filter, berke fed, hydrometres, spirit, hydrometres, milk, hydrometers, wet and dry bulb, incubator, electric (can be procured from microbiology), museum jars, balance analytical 200 gm., balance for weighing food stuff(capacity 2 kg)., centrifuge clinical, weighing machine adult, baby weighing machine, salters baby weighing machine, harpender calipers (for skinfold thickness), height measuring stand, ice lined refrigerator (i.l.r.) (at health centre), dissecting microscope, microscope oil immersion, autoclave (can be shared with pathology/microbiology department), chloroscope, horrock’s apparatus, muac tapes, haemoglobinometer, bp apparatus (digital), stethoscope, kata thermometer, globe thermometer, anemometer, sound level meter, soil testing kit, water sampling bottle from any depth, needle shredder, vaccine carrier, craft water testing kit, protective devices for occupational safety, ear muffs, ear plugs, safety helmet, goggles, safety boots, swine flu kit, gloves, triple layer surgical mask, high efficiency mask, long sleeved cuffed gown, protective eye wear, cap, disposable delivery kit, treatment kits as per national health programs, glucometer, treatment kits as per national health programs, glucometer, first aid kit, spirometer, otoscope, ophthalmoscope, table with marble or stainless steel tops with a minimum size of 6’ x 2’ x3’, tables with marble or stainless steel tops - half standard size, drill machine, hand saw, preferably metal, band saw for sectioning body and limbs, brain knife, mortuary cooler with arrangement to keep 4 body, storage tank to hold 10 cadavers, static/movable, durable tank with input and output, facility with lid, plastic tanks for storing soft and dissected parts, trolley table (steel), x-ray viewing lobby, charts, diagrams, models, slides etc., dissecting instruments for cadaveric dissection, meat cutting machine for thin body sections (trans and vertical) for gross anatomy, sectional study, embalming machine, microscopes, monocular, dissection microscope, microtomes, rotary (optional), microtomes, sledge, large cutting, cabinet for slides (1000), incubators, paraffin embedding bath, hot plates for flattening sections, hot air oven for drying slides (45 oc), refrigerators (minimum 165 litres), marking pencils, articulated skeleton set, bones (dis-articulated) sets, sherrington starling kymograph (electrically driven), myograph stand, inductorium, simple key, short circuiting key, pohl's commutator, vibrating interrupter, muscle trough, muscle lever, muscle grip of femur clamp, hook and weight set, heart lever (simple &starling), enamel tray, low voltage unit for tapping 2 and 4 volts for stimulation, electromagnetic time marker, tuning fork time marker 100 hz and 125 hz 2 each, electrodes, x-blocks, spirit lamps, marey's tambour, microscopes, oil immersion, demonstration eye piece, double demonstration eye piece, stage incubator, westergren's pipette for e.s.r. on stand(with space pipette), wintrobe’s pipette for esr and pcv with stand, perimeter pristely smith s/lp.984 b & t, digital perimeter, hemoglobin-meter sahli's or hellige (with spaces), hemocytometer, sphygmomanometer (digital) (mercury based instruments to be replaced with, suitable, alternatives), stethoscopes, stethoscopes, demonstration with multiple ear pieces, polygraphs, venous pressure apparatus, spirometer, ordinary, digital spirometer, gas analysis apparatus, halden's student type, van slyke's apparatus manometric, gas analyser automatic for co2, o2, n2, douglas bag, complete, basal metabolism apparatus, mosso'sergograph, clinical thermometer (mercury based instruments to be replaced with suitable, alternatives), compass aesthesiometer, thermo-aesthesiometer,

CTN :45244477

25 May, 2026 NA

Pondicherry - Pondicherry

Tender For providing and fixing of kitchen chimney gas poipeline connection and kitchen equipments for the canteen building inside the ptu campus under rusa fund - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

State Government

CTN :45291650

08 Jun, 2026 NA

Ukai - Gujarat

Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - wt-5177g work of environmental sampling and analysis ie monitoring of stack emission ambient air quality and water effluent at utps-eeec; as per scope of work in atc;..

Central Government/Public Sector

CTN :45181197

08 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For electrical/g work for :- jhs div : provision of electric water load testing equipment for power car of passenger trains at jhansi & gwalior.

CTN :45199189

05 Jun, 2026 NA

Karwar - Karnataka

Tender For fabrication, supply, erection, testing and commissioning of electrical water load testing equipment for power cars of mail exp. trains of konkan railway of madgaon depot under karwar region.

Petroleum Testing Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector