Latest pf motor Tenders | Government pf motor Tenders

State Government

CTN :42024338

07 Oct, 2025 86.0 Thousand

Kupwara - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of single phase submersible pumping unit of 1000 gph, 90 m head with corresponding head motor and desired switch gear protection equipment along with cable. mccb and 10kva manual voltage stabilizer at w

Central Government/Public Sector

CTN :41260177

06 Oct, 2025 NA

Bhopal - Madhya Pradesh

Tender For bid to ras corrigendum : supply of e4953051 numerical relays 01-sg4950067141-numerical o_slash_c and e_slash_f relay for incomer_slash_tie_slash_bc as per annexure-a it-001 _50_slash_51_slash_50n_slash_51n_slash_25_ , 02- sg4950067150-numerical o_slash_c and e_slash_f relay for trafo_slash_og as per annexure-a it-002 _50_slash_51_slash_50n_slash_51n_ , 03-sg4950067168- numerical o_slash_c and e_slash_f relay for capacitor feeder as per annexure-a it-003. , 04-sg4950067176- numerical motor protection relay as per annexure- a it-004. , 05-sg4950067184-numerical trafo differential relay with ref as per annexure-a it- 005. , 06-sg4950067192-numerical line diff relay for both ends as per ann-a it-006 uom-set , 07- sg4950067206-numerical bus diff relay as per annexure-a it-007. , 08-sg4950067214-numerical under voltage relay as per annexure-a it-008. , 09- sg4950067222-metrocil as per ann-a it-009. , 10- sg4950067230-stabilizing resistor _0-2kohms_ as per ann-a it-010. , 11-sg4950067249-ethernet switches _16fo_ as per ann-a it-011. , 12-sg4950067257-fo patch cords as per ann-a it-012. uom-meter , 13- sg4950067265-fo cable as per ann-a it-013. uom-meter , 14-sg4950067273-data concentrator panel as per ann-a it-014. , 15-sg4950067281-human machine interface _hmi_as per ann-a it-015. , 16-sg4950067290- relay parameterization device for switchboards as per ann-a it-016. , 17-sg4950067303-relay parameterization device for dc as per ann-a it-017. , 18-sg4950067311-global positioning device as per ann-a it-018. , 19-sg4950067320-report printing device as per ann-a it-019. ) /bid number : gem/2025/b/6511909 * /dated: 30-07-2025 & & / bid document 1 / 19

Central Government/Public Sector

CTN :41799867

10 Oct, 2025 NA

Raigad - Maharashtra

Tender For corrigendum : tender for supply of crc 2-26, 300 gms self spraying aerosal for elec maintainence., nexus (germany) make, two leg puller model no. 100-1.5,, dia. 25-130mm, leg: 100mm, torque: 80nm, spindle measurements:, m14 x 1.5 x 130., residual current circuit breaker [rccb], 63a 440v rating, three phase and nuetral, sensitivity 100 milliamp trip free mechanism, touch proof terminals ip20, resistance against unwanted tripping, conforming to relevant iec/bis standard, make: siemens/l and t/ legrand/havells/ge/abb/ schneider., plug top suitable for 16 amp. flameproof. weatherproof switch socket, 3 pin (2p+1e), in lm6 (cast a1) construction for single phase switch so cket. cat.no.ss/oa/1011, make: sudhir switchgear for urea plant., black ink ribbon part no lm ir508 for ferrule printing machine model lm-550a2/pc, make max co ltd. japan, reversible 2 way screw driver, magnetic hex shank, size: 6 inch, head type: one side flat/ slotted head and one side, phillips head, holder material: plastic, blade material: steel, make: taparia 905 h/jhalani/equivalent, industrial metal clad ap20 plug top 20 amp., 250 volts, cast aluminium 3 pin, crompton make, industrial metal clad ap10 plug top 10 amp 250 volts, cast aluminium 3 pin, crompton make, battery flat 9 volt of make duracell/energizer, insulation tape type p 101 frlt tape, size: 1.9 cm x 20me roll, fire retardant type, breake down voltage 2kv make permacel., battery pencil cell 1.5 volt heavy duty everedy model no.: 1015 r6/aa/um3 guaranted upto 0.6cv eveready make, battery cell 1.5volt, make: novino national neo type-r03 nt aaa, masonary (concrete) drill bit straight shank size: 4mm., masonary (concrete) drill bit straight shank size 6mm., masonary(concrete) drill bit straight shank, size: bmm, masonary (concrete) drill bit straight shank, size: 10mm, box spanner set-24 piece socket wrench set: 1/2" square, drive set-consisting of: 1-250 reversible ratchet handle, 1-250 slidin gt-bar, 1- universal joint, 1-420 mm speeder handle, 2 extension, box spanner set gadre or equivalent reputed make containing complete set of box spanner sockets, rachets, handles and other adoptors size: 6 mm to36 mm., ink ribbon case part no lm-rc500 for ferrule printing machine model lm-550a2/pc,make max co ltd. japan, heating element zero bend type. rating-2kw, 230vac, 50hz., mocnickel chromium steel complete with 1/2" bsp fixing nut. length 1350mm, suitable for surface load 3.2/cm2. as per attached drawing., motor fan for 0.75kw, 1500 rpm, 805 frame motor., coating: the fan shall be powder coated, cooling fan moc-ms., sheet thickness shall be minimum 3 mm., motor fan for 30hp (22kw)/1500 rpm 180 1 frame motor, motor fan for 75 kw, 1500 rpm (motor of ie2 class) 280 m & 280 s motors, motor fan for 75 kw, 3000 rpm, 280 s & 280 m frame size motor, motor fan for 3.7 kw,3000 rpm, motor of iez class) 132 s frame motors, moc: cast iron, motor fan for 60hp (45kw)/3000 rpm 225 s frame motor, motor fan cover for 7.5 kw, 1500 rpm, 132 m frame size motor (motor of ie2 class), moc: ms

Central Government And Public Sector

CTN :42121360

08 Oct, 2025 NA

Jamnagar - Gujarat

Tender For rates for electrical items of csr praposal for construction of education building of boys hostel managed by shri kalavad taluka meghvar seva samajeducation & cheritable trust in kalavad jamnagar- ht vcb , hv gas insulated breakers , power transformers , distribution transformers , resin cast transformers , a) resin cast impregnated , b) dry cast , ht xlpe cables , lt xlpe cables , lt acb , protection relays , lt panel , change over switch , sfu for main lt distribution panels , sfu for distribution panels & feeder pillers , mccb for main lt distribution panels , mccb for distribution panels , mcb distribution board , multi function digital meter for main lt distribution panels/digital kwh meters , analog , volt/ampare meter for distribution panels and feeder pillers , slector switch for voltmeter/ampa , power contactor & over load relays , quartz time clock switch , pvc wire with copper conductor , flush type , switches, sockets, holders and ceiling roses & electronic regulators , door bells/call bells , modular switches, sockets, plates & boxes , pvc conduit/oval , conduit & cassing capping and accessories , ignitors for hpsv, , metal helide , lamps , luminaries , led luminaries , ceiling fans , wall mounting fans , exhuast fans , heavy duty , industrial wall , mounting fans , water cooler , air conditioners , refrigerators , voltage stabilizer , inverters , d.g. sets , a) engine , b) alternator , electric motor , water pumps , water geyser , lugs & cable , glands

Central Government/Public Sector

CTN :42127795

03 Nov, 2025 NA

Ajmer - Rajasthan

Tender For supply of 16 amp, 415v ac, 3-phase contactor, coil voltage 110v ac, with 2 no + 2 nc contacts, suitable for condenser fan motor, heater, and blower motor of rmpu ac coaches, similar to bch make catalogue no. ce 15 dn 3a or equivalent. conforming to rdso specification no. elps/spec/ac/04 (rev-3) with amendment no. 1.accepted make: siemens, abb, schneider, and bch only, or any other rdso-approved make.

State Government

CTN :42063740

03 Oct, 2025 4.95 Lacs

Kinnaur - Himachal Pradesh

Tender For fabrication, supply, erection, testing and commissioning of reduced-voltage star–delta starter control assembly for 40 hp induction motor drive at ganvi power house stage-i, including associated protection, control, and auxiliary systems.

Central Government / Public Sector

CTN :42094991

14 Oct, 2025 NA

Mathura - Uttar Pradesh

Tender For supply of design manufacture supply installation testing commissioning of stp equipments c c - online 5 headed auto flaring unit capacity of the system min 150 cylsper hr , online valve screwing and unscrewing machine , designmanufacture supply of closed loop automatic degassing machine , design, manufacture, supply, installation of caustic soda and fresh water washing unit complete , supply of low voltage lamp and magnetic bar for internal cleaning of cylinder and inspection unit before hydro test. , supply of l1 and l9 plug gauges soft wire brush and 3 by 4 inch ngt thread cleaning tap. , design manufacture sitc of online electronic flp check scale , online plc based 5 by 5 head hydro test unit of min capacity 150 cyls by hr , design, manufacture, supply, installation, testing and commissioning of online water ring vacuum pump of displacement capacity min 100 cub ft by min , air dryer post hydro testing , design, manufacture, , supply, installation, testing and commissioning of heat chambers along with insulated chamber where hot air , automatic man less painting booths for primer and finished painting , sitc of manual primer 01 booth and painting and 01 booth for repainting shed , semi automatic punching , stenciling machine. , online valve screwing unscrewing machine , 5 cylinder pneumatic test unit for lpg cylinder pneumatic machine , 4 wheel overhead conveyor for conveying lpg cylinders. , overhead conveyor chain drive units, compatible flp motors etc supply and installation , gi chain conveyor system , air compressor for stp unit process air 150 cfm , 45 cfm reciprocating air compressors with working pressure 14-20 kg persqm, motor flp 15hp air cooled , electrical and electronic unit panel , design, installation, testing commissioning of entire plc system for stp automation and to get system output of minimum 150 cylinders per hr , sitc of 25 klpd plant ) /bid number : gem/2025/b/6739081 * /dated: 29-09-2025 & & / bid document 1 / 18

Central Government/Public Sector

CTN :42095012

20 Oct, 2025 NA

Jorhat - Assam

Tender For supply of consumables for construction of hybrid energy device - mild steel sheet, 8ft x 4ft x 1.2 mm, mild steel angle rod, 1.5 inch x 20 ft, mild steel angle rod, 1 inch x 20 ft, mild steel welding rod, diameter: 3.15 mm, mild steel perforated sheet, 8ft x 4ft x 1.2 mm., stainless steel 304 sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 perforated sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 pipe, 1.5 inch dia, 1.5 inch dia, 1.2 mm, 20 ft, zinc alloy door handle lock, stainless steel 304 welding rod, 2.5 mm diameter, ceramic fibre blanket insulation, 24"x12"x1", ceramic fibre rope, 10 mm diameter, 30 m length, heat insulating gasket, 8 ft x 4 ft, 5mm thickness, heat resistant spray paint 225 ml, silicon pipe 1/2 inch inner dia, 10 m, high temperature silicon hose pipe, 2 inch inner dia, 12 feet, worm-drive tubing clamps.chrome steel, hose clamp, 1/2 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 1 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 2 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 3 inch dia, galvanized mild steel set of nut, bolt and washer, 8 mm diameter, 2 inch length, temperature sensor with digital display, k type, 0-1250 с, adruino uno r3 development board, rod heater, 8.2 mm diameter, 12 inch length, quartz furnace observation glass, temperature: 1200 °c, 10 em diameter, 5 mm thickness, copper tube 1/2 inch dia, 23 swg, copper electric wire 6 sq. mm, 90 m, copper electric wire 2.5 sq. mm, 90 m, mcb dp 32 a, electric socket 16 a, electric plug 16 a, combined box 20 a, anabond gasket maker 85 g, heavy load caster swivel diameter: 100 mm, galvanized iron pipe b class diameter: 1.5 inch, length: 40 ft, galvanized iron pipe b class diameter: 1/2 inch, length: 20, galvanized iron pipe b class diameter: 3/4 inch, length: 20 a, stainless steel 304 ball valve diameter: 1.5 inch, stainless steel 304 ball valve diameter: 3/4 inch, stainless steel 304 hall valve diameter: 1/2 inch, check valve, brass diameter: 1.5 inch, check valve, brass diameter: 3/4 inch, check valve, brass diameter: 1/2 inch, metal cutter grinder disc, pack of 10, grit number 220, diameter: 4 inch, grit material: aluminium oxide, metal cutter grinding wheel, pack of 5, grit number 4., diameter: 4 inch, grit material: aluminium oxide, flap disc, pack of 10, grit number 80, diameter: 4 inch, grit material: aluminium oxide, flexible heavy duty 3 layer pvc water pipe, diameter: % inch, length: 30 m, teflon tape for plumbing, pack of 10, 12 mm thick and 10 m length, heat resistant gloves, material: leather, size: 30.48 cm, nitrile disposable hand gloves, pack of 50 pieces, size: l, 150 microfarad capacitor, 230 v, 150 microfarad, 230 v, anti vibration rubber ribbed pads, pack of 4, 150mm x 150mm x 12mm, square pillow block bearing ucf204, 20 mm diameter, inner ball mounted pillow block insert bearing kp08, 8 mim bore, step down transformer, 220v ac to 12-0-12 v.1.5a, single strand wire, diameter 0.51mm,5m, moc3021 moc 3021 optocoupler, bta16-600b triac, 600v 16a, switch. sw-spst, in4007 diode, 100%via, bldc motor with compatible e-bike controller, 48v 900w 3300rpm, lithium-ion battery, a grade 3.2v 2000mah (5c), battery management system, li-ion 135 48v 20a, nickel strip, 0.2 mm thickness, 10 mm width, 5 m length, silicon wire, 12awg, insulation paper, 65mm, glue gun, 40 w, spot welding rod 5000 w, cpu fan 12 v dc, thermoelectric generator (teg), 150°c, module., configuration: sp1848-27145, tungsten rhenium thermocouple, minimum temperature reading: 0°c, maximum temperature reading: between 2300°c and 2871°c, max31856 instrumentation amplifier,, resolution: 0.0078125°c, supply voltage: 3.3v to 5v, arduino uno r3 with adapter cable, miniature circuit breaker fuse, d type, 32 a, power rocker switch, voltage rating: 24 vdc, current, rating: 14 ma, 19mm size red power symbol led s.s. momentary type, push button switch 5v-24v dc, potentiometers 100 kohm, potentiometers 1 m ohm, relay module-(ssr-2 channel), 2 chann

CTN :41985354

11 Oct, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of automatic voltage regulator , over load relay , motor protection unit , generator protection , connector main , connector load , time delay relay , automatic voltage regulator , avr

Central Government/Public Sector

CTN :42106799

13 Oct, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of dc shunt motor, rated kw -7.5, rpm-1500/3000, frame size- asbg112m, mounting: b35, arm. voltage: 220v

Pf Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors