Latest ph probe Tenders | Government ph probe Tenders

CTN :45648758

02 Jul, 2026 NA

Udhampur - Jammu And Kashmir

Tender For supply of ketamine hcl 50 mg ml 2 ml inj , dexmedetomidine 100 mcg per ml inj , succinylchloline chloride 50 mg per ml 2 ml inj , bowie dick test pack class 2 chemical indicator designed for testing air removal efficiency of 132 to 1340c dynamic air removal steam sterilizers includes a process indicator on the test pack , chemical indicator class v for steam to verify parameters of steam sterilization time or temperature or steam quality should be compliant with bs or en or iso 011140 1 100 per box , hydrogen peroxide soluion , 2 propanol ip 45gm 1 propanol 30gm ethyl hexadecyl dimethyl ammonium ethylsulphate 0 point 2gm with emollient and moisturizer bott of 500ml with dispenser , sterile surgical blade size 23 100 per packet , sterile surgical blade size 10 100 per packet , sterile surgical blade size 15 100 per packet , rapid readout biological indicators for steam sterilization containing standardized viable population of bacillus stearothermophilus spores 50 pcs per box , sterile surgical blade size 20 100 per packet , chlorhexidine gluconate surgical scrub 4 percent , povidone iodine 7 point 5 percent solution 500 ml , knife bard parker blade size 1 fitting commercial no 11 packet of 6 , peracetic acid bott of 810 gm , steam indicator tape , enzymatic detergent , glutaraldeyde 2 percent aqueous soln with activator , iso propanol 60 to 65 percent and benzalkonium chloride skin disinfectant 63gm or 0 point 025 gm in 100 gm bott of 100 ml , disposable gloves sterile 7 point 0 size , stimulating needle 21g x 4 for regional nerve block , leadercath 20 8cm , extension tubing with three way stop cock 25 cms in length , extension tubing with three way stop cock 200 cms in length , three way stop cock plastic

CTN :45599742

08 Jul, 2026 NA

Silvassa - Gujarat

Tender For supply of ophthalmic instruments & consumables under npcbvi, national health mission, dnhdd > - ophthalmic instruments & consumables under npcbvi, national healthmission, dnhdd (specifications as per tender documents), phaco probe (compatible with amo machine), vitrectomy cutter (compatible with amo machine), disposable knife set, intraocular lens (iol), viscoelastic solution, iris hooks, needle sleeves for (compatible with amo machine), irish claw lens forceps / lens holding forceps, cataract set (set of 20), sodium hyaluronate 10 ml (healon), bi-manual irrigation/aspiration cannula, lensometer automated, black goggles (post-operative)

Central Government And Public Sector

CTN :45532117

29 Jun, 2026 NA

West Champaran - Bihar

Tender For standing order/rate contract for supply of instrument materials on door delivery and callup basis at hbl plant sugauli, east champaran and lauriya, west champaran, bihar. - load cell 100 kg strain gauge type, make-avery/ perciamoleen, 4 load cell junction card 4 input 1 out, make-avery/ perciamollen, signal isolater optical isolation type signal input/output 4-20 ma supply 18- 260 vac/vdc, make-radix, signal converter 0-5 a to 4-20 ma supply voltage 18-240 vac/vdc, make-radix./masibus/ p&f, zss controller with its proximity supply voltage 230vac, make-masibus, hall s effect type top roller lift sensors (asd-he-trls-10) and indicatingtransmitters (asd-he-trlit-1005-1-2), make-yu tech, infra red type donnelly chute level sensors, indicators & transmitters, make-yu tech, hall s effect type cane blanket level sensors( asd-he-cbls-10) and indicatingtransmitters (asd-he-cblit-1005-1-2), make-yu tech, pressure transmitter strain gauge type range 0-16 kg/cm2 output 4-20 ma looppowered processe connection 1/2 inch male threaded, make- honywell/ypkogawa, on off controller input signal universal, 2 relay output on set point, make-honywell, size 96x96 supply 230vac, weighing controller/ indicator for beltscale model no=40 bs, make-perciamollen, directional control solenoid operated valve (ng10): 4we 10 d a01-24dg/v, make-hydac, direction control valve, solenoid operated (ng6) type: 4we 6 d a01-24dg/v, make-hydac, pressure relief valve sandwich plate type for ng06(4we 6 d a01-24dg/v), pressure range 210 kg/cm2flow 120 l/min, manual adjustment, fkm sealing, make-hydac, digital pressure indicator cum transmitter range 0- 300 kg/cm2 model no eds 3000, make-hydac/ above equivalent, make parker, strain gauge type dp switch across filter range 0.05kg/cm2, make-hydac/ parker, pnp pproximity switch 2 wire range 15 mm od 30 mm male supply 24 vdc p&f, lvdt range 0-1100 mm probe od 10 mm 1/2 inch threaded connection, out put 4- 20 ma model no. c01-1100-000 make hydac/ above equivalent, make-mts, modelno. rhm1185md601a01, level indicator cum transmitter loop powered output 4-20 ma range 1000mm fluid hydaulic oil, make-parker, part no. 110558, model no. hblt-a1-6u, digital temperature indicator cum transmitter head mount range 0-100c probe od 8 mm loop powered output 4-20 ma, make-hydac/ parker probe length 700mm, solenoid coil connector 4 pin with led indicator, size-20mmx20 mm, lvdt probe connector with 10 mtr cable lid connector type 6 pole, m16 dinfemale type, make-any reputed, plug in power relay with base, coil voltage 24 v dc model no my2n, make-omron, rtd pt100 type length 500mm od 6 mm make thermostatic or any reputed, temperature transmitter cum digital indicator remote field mounting input universal, loop powred, output 4-20 ma, make-rosemount/ honywell/abb/yokogawa/p&f hart enable, 8 channel rtd transmitter input rtd pt100( field interface boards 8 channel linearized rtd/tc input), output 4-20 ma model no-mas-ai-u-o8d-9-1-0, make- masibus, pressure transmitter lvdt type range minus 2 kg/cm2 to 16 kg/cm2 loop powred output 4-20 ma 1/2 inch female threaded process coneection, field mounting hart enable, make-abb/ emerson/ rosemount/ yokogawa, diffrential pressure transmitter range minus2 kg/cm2 to 2 kg/cm2, field mounting process connection 1/2 inch ntp female threaded loop powered 4-20 ma, output hart enable, make-abb/ yokogawa/ rosemount/ emerson, diffrential pressure transmitter range minus 2 kg/cm2 to 2 kg/cm2, field mounting process connection 3 inch flanged diapharm type at higher side loop powered 4-20 ma, output hart enable, make-abb/ yokogawa/ rosemount/emerson, diffrential pressure transmitter range minus 2 kg/cm2 to 2 kg/cm2, field mounting process connection 3 inch flanged diapharm type at both side 4 mtr capilary, loop powered 4-20 ma output hart enable, make-abb/ yokogawa/rosemount/ emerson, perssure gauge burden tube type range 20 kg/cm2 dial size 6 inch process connection 1/2 inch ntp male threaded, make-warri/

CTN :45549158

09 Jul, 2026 NA

Kharagpur - West Bengal

Tender For distribution transformer of rating 500 kva, 11kv/415v-240v, 3-phase, 50hz, outdoor type, plinth mounted, on load type tap changer for variation of hv voltage from +5% to -15% in steps of 2.5%, energy efficiency level 3 or better, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (vector symbol- dyn11), onan cooled transformer, confirming to is 1180 (part 1): 2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve will be applicable for all capacity of transformers. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides with outdoor type bushings appropriate voltage and current ratings. the high voltage bushings (3 nos.) shall confirm to is/iec 60137. the low voltage bushings (4 nos.) shall confirm to is 7421. suitable cable-end box along with cable entry hole glands is tobe provided at l.t. side. following has to be submitted by supplier along with supply of material: (i) type test report of transformer having same rating, make (& model if any) and design from nabl accredited lab as per is 1180 (part 1) latest. (ii) routine test certificates as per is: 1180(part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d), (e) of is: 1180 (part 1) latest. bee star rating:- 3 or above (firm shall submit a valid bee certificate for the offered product with desired bee star rating). [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45502072

01 Jul, 2026 NA

Daman - Gujarat

Tender For purchase of items required for cataract surgery under national health mission, dnhdd - cataract surgery items, iris claw lens (19 mm, 20 mm, 21 mm, 22 mm), cataract surgery set (reusable instruments), phaco probe (compatible with oertliphaco machine), viscoelastic material (ovd), phaco sleeve, iris claw lens forceps, crescent knife, 2.8 mm keratome knife, 15 lance tip knife, 5.2 mm ophthalmic blade

CTN :45410030

15 Jun, 2026 35.0 Thousand

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of biological indicators for low temperature steam and formaldehyde sterilization processes (q2)

CTN :45516505

26 Jun, 2026 1.00 Lacs

Farrukhabad - Uttar Pradesh

Tender For tender for repairing and calibration of temperature indicators installed on boiler , work of repairing, calibration and rewiring of superheated wash water temperature control system , laying of comprehensive cable, installation of thermocouple and commissioning of indicators at the boiler station , work of repairing, rewiring, overhauling and commissioning of d- superheating system of exhaust line , repairing and commissioning work of temperature indicators of sulfur furnace , laying of compressive cables of sulfur furnace, installation of sensors and commissioning of temperature indicators , to carry out installation and commissioning work for raw-sulfated juice, clear juice, exhaust steam and injection water inlet temperature , over hauling, rewiring and recommissioning of auto drum water level control system of boilers , rewiring and recommissioning of high or low alarm system on boilers for water level , overhauling, rewiring and recommissioning of boiler steam generation system , overhauling, rewiring and recommissioning of boiler feed water measurement system

Central Government And Public Sector

CTN :45370557

17 Jun, 2026 NA

Angul - Odisha

Tender For corrigendum : supply of digital temperature controllers cum indicators , microprocessor based digital temperature indicator cum controller

Central Government/Public Sector

CTN :45467531

15 Jun, 2026 NA

Chatra - Jharkhand

Tender For supply of mandatory spares for chemical dosing skids , mandatory spares for oxygen dosing skids - drive shaft cum worm , drive worm wheel , connecting rod plate , cross head guide bush , plunger , plug , oil seal , washer , gland nut , electronic transmitter , transmitter of all type, ranges & model no. (for measurement of pressure, differential pressure flow, level, etc). , pressure transmitter , differential pressure transmitter , level transmitter , temperature element , local indicators like temperature gauges, pressure gauges, differential pressure gauges, flow gauges, flow meter etc. , pressure gauge , pressure gauge , diff. pressure gauge , process actuated switch devices includes all type of pressure, differential pressure, flow, , temperature, differential temperature, level switch devices. , process connection piping (for impulse piping/tubing, sampling piping/tubing and air supply piping , applicable) , valves of all types & models , 2 way, 3 way, 5 way valve manifolds , fitting , measuring instrument , electronic transmitters , transmitter of all type, ranges & model no. (for measurement of pressure, differential pressure flow, level, etc). , level transmitter (ultrasonic / radar type) , temperature element , local indicators like temperature gauges, pressure gauges, differential pressure gauges, flow gauges, flow meter etc. , process actuated switch devices includes all type of pressure, differential pressure, flow, temperature, differential temperature, level switch devices. , pd type flow transmitters , any other instrument (if applicable) , process connection piping (for impulse piping/ , valves of all types & models , 2 way, 3 way, 5 way valve manifolds , fitting , purge meter , filter regulators , mass flow controller , control valves actuators & accessories , pneumatic & electro-hydraulic actuator assembly , valve trim (including cage, plug, stem, seat ring, guide busing etc.) , diaphragm 'o' rings seals etc, all types of make etc. , pressure gauges of all types of make, rating, etc. , solenoid valves (if applicable) , positioner unit (complete unit) , pneumatic air filter/regulator of each type, makes rating etc. , air lock relays

CTN :45479514

25 Jun, 2026 NA

Kharagpur - West Bengal

Tender For distribution transformer of rating 250 kva, 11kv/415v-240v, 3-phase, 50hz, outdoor type, plinth mounted, the type of tap changer: off-load tap changer for variation of hv voltage from +5% to -10% in steps of 2.5%, energy efficiency level 3 or better, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (vector symbol- dyn11), onan cooled transformer, conforming to is 1180 (part 1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest withcondition that drain-cum-sampling valve will be applicable for all capacity of transformers. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides with outdoor type bushings of appropriate voltage and current ratings. the high voltage bushings (3 nos.) shall conform to is/iec 60137. the low voltage bushings (4 nos.) shall conform to is 7421. suitable cable-end box along with cable entry hole glands is to be provided at l.t. side. following has to be submitted by supplier along with supply of material: (i) type test report of transformer having same rating, make (& model if any) and design from nabl accredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates as per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is: 1180 (part 1) latest. detailed specification attached as annexure a. [ warranty period: 30 months after the date of delivery ]]

Ph Probe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector