Latest phase sequence corrector Tenders | Government phase sequence corrector Tenders

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

CTN :45716595

13 Jul, 2026 4.50 Lacs

Najibabad - Uttar Pradesh

Tender For supply of fabrication c c - damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , install valve in steam line at pan no 2 550 mm 1 , install valve in steam line at pan no 2 550 mm 2 , install valve in steam line at pan no 2 550 mm 3 , install valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and install new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick //bid details 2 / 117 / / 1 1 /item category plate and depositing scrap in scrap yard , dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new pl

CTN :45632614

30 Jun, 2026 NA

Delhi - Delhi

Tender For supply of stainless steel cleaner polish , automative battery 12v 9ah , distribution box 12way , distribution box 8way single door , led light 5watt slim compact aluminium die cast , led down light 9watt bulk head , led t5 tube light 20watt 4 feet , rccb 25amp 4 pole , rccb 63 amp 4 pole , lift cabin cross flow 45w 50hz , rcbo 4pole 40amp 30m , cabin fan 300mm sweep , hooter with 110 cd strobes shall be synchronized for better evacutaion , rccb 40amp 4 pole , mcx41 contactor 4 pole 300amp , mcx34 contactor 4 pole 255amp , automatic phase sequence corrector 15 hp , excaust fan 300mm sweep , mcb 10amp 10ka spn , copper cable 16sqmm single core , mcb 32amp 240v spn 50hz , copper cable 10sqmm single core , mcb 20 amp 10 ka spn , portable fire extinguishers (v3) isi marked to is 15683 (q2)

CTN :45269684

27 May, 2026 5.64 Lacs

Delhi - Delhi

Tender For corrigendum : repair maintenance of various electrical and mechanical services at nic block a cgo complex lodhi road new delhi sh- comprehensive maintenance of c-mos make servo voltage stabilizer and phase sequence corrector

Central Government/Public Sector

CTN :45008968

18 May, 2026 45.00 Lacs

Delhi - Delhi

Tender For corrigendum : repair replacement and maintenance of lt panel voltage stabilizer and phase sequence corrector for lifts at piru vihar under ge (u) pm delhi cantt10

Central Government/Public Sector

CTN :44989677

16 May, 2026 40.00 Lacs

Carnicobar - Andaman And Nicobar Islands

Tender For corrigendum : provn of automatic 3 phase ryb phase sequence correctors at certain location at af stn carnicobar provn of amf panel for 600 kva diesel generator set at af stn carnicobar and provision of air conditioners at certain locations at af station carnicobar.

CTN :45010930

11 May, 2026 NA

Delhi - Delhi

Tender For bid to ras supply of phase sequence corrector 15hp , hooter with 110cd , automotive battery 12v 18ah , automotive battery 12v 7ah , automotive battery 12v 12ah , automotive battery 12v 42ah , cabin fan 300m sweep , lift cabin fan cross flow blower power input 57w 220v 50hz , led down light 6w slim aluminium die cast edge , led batten 10 w 2 ft , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , pvc insulated unsheathed cable with flexible conductor isi marked to is 694 (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , miniature circuit breaker boards for voltages conforming to is 13032 (q3)

CTN :45068043

02 May, 2026 29.64 Lacs

Varanasi - Uttar Pradesh

Tender For maintenance of electrical installation & fans, pumps, diesel generator set at gpra kendranchal colony, bada lalpur, varanasi. (sh-sitc of lt panel & phase sequence corrector)

Central Government/Public Sector

CTN :44680739

25 Apr, 2026 45.00 Lacs

Delhi - Delhi

Tender For corrigendum : repair replacement and maintenance of lt panel voltage stabilizer and phase sequence corrector for lifts at piru vihar under ge (u) pm delhi cantt10 - name of work: repair / replacement and maintenance of lt panel, voltage stabilizer & phase sequence corrector for lifts at piru vihar under ge (u) p&m delhi cantt-10

CTN :44727123

08 Apr, 2026 3.33 Lacs

Mussoorie - Uttarakhand

Tender For repair maintenance of of sub-stations, dg sets, wet riser system, fire alarm system, central heating system, lifts, stp and swimming pool installed in different office buildings of lbbsnaa, mussoorie. (sh:- annual maintenance contract of different capacity servo voltage stabilizer & phase sequence corrector installed at various location in lbsnaa, mussoorie.)subwork/packages:electrical

Phase Sequence Corrector Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector