Latest photomicrographic system Tenders | Government photomicrographic system Tenders

CTN :40540973

21 Jul, 2025 NA

Ranga Reddy-T - Telangana

Tender For bid to ras corrigendum : supply of brass filler rod 1mm , bronze flux , copper filler rod 2mm , copper pipe half inch dia , ms copper coated filler rod , alluminium flux , refilling of oxygen gas cyl 7cb , refilling of acetylene gas cyl 3cb , calcium carbide , cutting wheel 14 inch , cutting wheel 4 inch , grinding wheel 4 inch , welding electrod e6013 , armr welding electrod 308l , angle iron 1x1 inch 3mm , round bar 12mm ms , round pipe 3inch 2mm ms , flat patti 1inch 3mm ms , ms square pipe 2mm, 1 point 5 inch , ms plate, 4x8ft, 6mm , ms sheet 22 gauge 4x8 ft , ms sheet 24 gauge 4x8 ft , tig welding torch zozzle kit , tungsten electrode lanthnide , tungsten electrode red thoriated , alluminium tig welding filler rod 4043 , coal , alluminium , molding sand , zinc sheet 1mm , drill bits, 2mm to13mm, hss , solder soft , pop rivets 1 point 5 inch ms , snap rivets point 5 inch ms

CTN :41114419

29 Jul, 2025 NA

West Kameng - Arunachal Pradesh

Tender For tender for supply of welding items d d - apron leather for welder superior quality , gloves leather for welder superior quality , welding holder is standard , dark glass for welding screen 4 inch x 3 inch superior quality , mild steel welding electrode ferro speed size 3.15 mm x 450 mm 150 pcs pkts is standard , mild steel welding electrode hard facing citemnngam size 4x450 mm is standard , welding rod cast iron size 3.15 x 350 mm is standard , wire brush for welder size 6 inch x 2 inch , goggles for welder is standard , welding glass white is standard , hand welding blow pipe with 6 nos swaged tips size 2 3 6 13 and 20 mm , oxygen gas regulator double stage superior quality , acetylene gas regulator double stage is standard , rubber hose for oxygen gas isi bis marked , rubber hose for acetylene gas isi bis marked , eutectic 680 welding rod size of 3.15mmx450mm is standard , eutectic 680 welding rod size of 4mmx450mm is standard , welding gas lighter is standard , stone for gas welding lighter , gas cutter heavy duty is standard , gas welding torch is standard , arc welding rod ms e6012 size 2.5x350mm is standard , arc welding rod ms e6012 size 3.15x450mm is standard , arc welding rod ms e6012 size 4x450mm is standard , arc welding rod ms e6013 size 2.5x350mm is standard , arc welding rod ms e6013 size 3.5x450mm is standard , arc welding rod ms e6013 size 4x450mm is standard , esab cutogen 5 gases cutting torch is standard , welding cable with copper conductor heavy duty 600 amp isi marked , two stage regulator for oxygen & actylenept no 070017241 is standard , flash back arrestor for oxygen or actylene gas work , oxygen oractylene gas welding torch tips sets set of tip size 1 to 5 is standard , ms gas welding rod diff sizes , safety shoes size 7 isi or bis marked , safety shoes size 8 isi or bis marked , safety shoes size 9 isi or bis marked , brass brazing welding rod diff size , gas cutting nozzle 1 by 32 is standard

CTN :38924589

02 Aug, 2025 11.94 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin welder tradeat iti rajkot, gujarat, indiapackage 2: welder trade - electrode holder, h.p. welding torch with 5 nozzles, welding transformer with all accessories (400a, ocv 60-100 v, 60 percent duty cycle), welding transformer with all accessories (300a, ocv 60 - 100 v, 60 percent duty cycle), inverter-based welding power source, d.c arc welding rectifiers set with all accessories, gmaw welding machine, ac/dc gtaw welding machine, spot welding machine to15 kva with all accessories, gas welding table with firebricks, arc welding table with positioner, oven, electrode drying, table for gas cutting, welding simulator for smaw / gtaw / gmaw, seam welding machine(longitudinal) 75 kva with accessories, submerged arc welding machine with accessories (1000amps), friction welding machine, welding motor generator, fume extractor system connecting all the welding booths, mag welding robot with all standard accessories, welding booth with forced fume extractor, for welding machines, carriage welding system, 400 amps with industry 4.0 ready multi process welding set, gas manifold system, magnetic particle testing machine probe type with all standard accessories, oxygen gas pressure regulator double stage, acetylene gas pressure regulator double stage, co2 gas pressure regulator, with flowmeter, argon gas pressure regulator with flowmeter, flash back arrester (torch mounted), flash back arrester (cylinder mounted), air plasma cutting equipment with all accessories, air compressor suitable for air plasma cutting system, portable gas cutting machine capable of cutting straight & circular with all accessories, pedestal grinder fitted with coarse and medium grain size grinding wheels, bench grinder fitted with fine grain size silicon carbide green grinding wheel, ag4 grinder, hand shearing machine capacity to cut 6mm sheets and flats, power saw machine, work bench, oxygen, acetylene cylinders, co2 cylinder, argon gas cylinder, anvil 12 sq. inches working area withstand, swage block, portable abrasive cut-off machine, potable cnc profile cutting system with all standard accessories, ultrasonic flaw detector with accessories, eddy current tester

CTN :38924590

02 Aug, 2025 11.94 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin welder tradeat iti bhilad, gujarat, indiapackage 2: welder trade - electrode holder, h.p. welding torch with 5 nozzles, welding transformer with all accessories (400a, ocv 60-100 v, 60 percent duty cycle), welding transformer with all accessories (300a, ocv 60 - 100 v, 60 percent duty cycle), inverter-based welding power source, d.c arc welding rectifiers set with all accessories, gmaw welding machine, ac/dc gtaw welding machine, spot welding machine to15 kva with all accessories, gas welding table with firebricks, arc welding table with positioner, oven, electrode drying, table for gas cutting, welding simulator for smaw / gtaw / gmaw, seam welding machine(longitudinal) 75 kva with accessories, submerged arc welding machine with accessories (1000amps), friction welding machine, welding motor generator, fume extractor system connecting all the welding booths, mag welding robot with all standard accessories, welding booth with forced fume extractor, for welding machines, carriage welding system, 400 amps with industry 4.0 ready multi process welding set, gas manifold system, magnetic particle testing machine probe type with all standard accessories, oxygen gas pressure regulator double stage, acetylene gas pressure regulator double stage, co2 gas pressure regulator, with flowmeter, argon gas pressure regulator with flowmeter, flash back arrester (torch mounted), flash back arrester (cylinder mounted), air plasma cutting equipment with all accessories, air compressor suitable for air plasma cutting system, portable gas cutting machine capable of cutting straight & circular with all accessories, pedestal grinder fitted with coarse and medium grain size grinding wheels, bench grinder fitted with fine grain size silicon carbide green grinding wheel, ag4 grinder, hand shearing machine capacity to cut 6mm sheets and flats, power saw machine, work bench, oxygen, acetylene cylinders, co2 cylinder, argon gas cylinder, anvil 12 sq. inches working area withstand, swage block, portable abrasive cut-off machine, potable cnc profile cutting system with all standard accessories, ultrasonic flaw detector with accessories, eddy current tester

Central Government/Public Sector

CTN :41043957

21 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of spares for mjp 6000 gun - 70 inch barrel holder , part no. mjp -600021 , 45 inch barrel holder, part no. mjp -600011 , o ring for barrel, part no. mjp -600035 , socket head cap screw, m4x10, part no. mjp- 600015 , o ring for barrel holder, part no. mjp -600019 , barrel with o ring without tc, part no. mjp- 600032 , socket head cap screw, m5x10, part no. mjp -600018 , 70 inch inter connector, part no. mjp -600022 , 45 inch inter connector, part no. mjp -600013 , feed tube assembly, part no. mjp -600025 , powder feed tube non tc set, part no. mjp- 600028 , fitting powder port one fourth inch, part no. mjp -620180 , nut, one fourth inch tube, part no. mjp -210364 , powder feed splitter, part no. mjp -600027 , o ring interconnector big, part no. mjp -1003222 , o ring, combustion chamber valve core o ring, part no. 88 -44 , combustion chamber, part no. mjp- 600014 , water jacket, part no. mjp -600016 , o ring, combustion chamber to stab, spacer, part no. mjp - 230059 , o ring, stabilizer, back part no. mjp - 230094 , o ring , stabilizer front, part no. mjp-230212 , coaxial stabilizer inline, part no. mjp -600024 , nipple, one sixth inch npt assembly, part no. mjp - 450934 , combustion pressure tube assembly, part no. mjp -600628 , nut, stabilizer to water jacket, part no. mjp -450780 , coaxial tube assembly with oring, part no. mjp -600464 , spark plug assembly, part no. mjp -600408 , o ring, spark plug seal. part no. mjp -230045 , ignitor electrode, part no. mjp - 450875 , o ring, insulator od, part no. mjp -230012 , insulator, spark plug, part no. mjp -450876 , o ring insulator rear, part no. mjp -230042 , spark plug body, part no. mjp -620175 , fitting, swivel, water in, three eighth inch mnpt, part no. mjp -210359 , fuel check valve one eighth npt, part no. mjp -410113 , nipple, one eighth inch fuel check valve stabilizer, part no. mjp -210077 , oxygen check valve, one fourth inch npt, part no. mjp -410165 , nipple, one fourth inch oxygen check valve to stabilizer, part no. mjp - 210081 , tubing 1.8 inch od, comb chamber pr10m, part no. mjp -220098 , complete o ring set, part no. or -6000 , connector one eighth inch id pu fitting for copper coil, part no. mjp -600628 , o ring for inter connector, part no. mjp -600017

Central Government And Public Sector

CTN :41055078

02 Aug, 2025 11.01 Lacs

Udhampur - Jammu And Kashmir

Tender For supply of ss welding electrod 3.15 x 350mm 309 m.o.15 conf. aws colon sfa.5.4 slash is 5206 colon e 23.12.2 slash bs2926 hyphen 1970 colon e 23.12.2 as per ts , welding electrode e 309 mo-15 2.5 mm , welding electrode ms e-7018 low hydrogen, size 3.15mm x 450mm as per ts , welding electrode, 2.5 mm e-7018, length equal to 350 mm as per ts , welding electrode ms e-6013 general purpose, size 3.15 mm x 350mm as per ts , welding electrode ms e-6013 general purpose, size 2.5mm x 350mm as per ts , welding electrode e-6013, 4.00x350 mm , 4mm cutiing rod , cast iron welding rod 3.15x350mm , electrode brass brazing rod 2mm dia x 860 mm length , copper coated gauging rod 6mm , gauging holder , welding lead aluminium , welding glass white , welding screen glass coloured , welding gloves leather left hand , welding gloves leather right hand , oxygen gas regulator , gas regulator for da , welding wire brush , brazing torch , chipping hammer , cylinder key double , welding helmet , welding screen , grinding gogles , welding holder 600amp , gas cutting set suitable for oxy-da gas as per ts ) /bid number : gem/2025/b/6395183 * /dated: 12-07-2025 & & / bid document 1 / 30

Central Government/Public Sector

CTN :41004451

18 Jul, 2025 1.99 Lacs

Sidhi - Madhya Pradesh

Tender For supply of acetylene pressure regulator as per is 6901 (q3) , oxygen gas regulators (version 2) (q2) , dark glass for welder's screen (q3) , welder gloves or gauntlets as per is 2573 (q3) , electrode holder as per is 2641 (q3) , welding goggles for eye protector as per is 5983 (q4)

CTN :40977450

29 Jul, 2025 NA

Kamrup - Assam

Tender For supply of welding cable , electrode , gas cutting nozzle , welding brazing nozzle , oxygen regulator , acetylene regulator , weldcraft steel lighter for welding , plazma cutting nozzle , plasma cutting heat shield , hypertherm retaining cap , hypertherm plasma cutter air filter 109302 , plasma cutting electrode , regulator for argon gas , co2 regulator with heat exchanger , mig wire dia 0.8mm , mig wire dia 1.2 mm , mig wire dia 1.0 mm , mig tip dia 0.8 mm , mig tip dia 1.0 mm , mig tip dia 1.2 mm , contact tip holder for mig , mig gas diffuser 36kd , ceramic nozzle for tig welding 3620 , ceramic nozzle for tig welding 3621 , tungsten for tig welding grey colour , tungsten for tig welding red colour , electrode holder , hand grinding machine key , mig nozzle , smooth wheel , cutting wheel , rough wheel grinding wheel , carbon brass , tongs , chipping hammer , ss electrode , tig welding torch set , welding helmet , welding hand gloves , tig collect 1.0mm , tig collect 2.4 mm

CTN :40962523

25 Jul, 2025 NA

Khorda - Odisha

Tender For supply of wire brush - 200x26x26mm , leather apron - 35 x 24 inch , leather hand gloves - 14 inch , leather leg guard - 17 inch , leather hand sleeve - 57 x 13 cms , electrod holder - 400amp , ccms mig welding filler wire - dia 0.8mm , industrial spark lighter - 155mm , tungsten electrode red tip - 1.6x150mm , black smith tong - 15 inch , double stage regulator- oxygen 230 bar , double stage regulator-argon 230 bar , double stage regulator-acentylene 50 bar , earth clamp 400amp

CTN :40955282

18 Aug, 2025 NA

Kavaratti - Lakshadweep

Tender For item wise procurement and supply of laboratory items for a period of 12 months - equipments, digital turbidity meter/ nephelometer -(a).parameter range- 0 to 200 & 200 to 1000 ntu*. (b). readability - 0.1 ntu & 1.0 ntu. ( c). accuracy - 3% of range. (d). repeatability - 2% of range. (e). light source - tungsten halogen lamp. (f). detector - photo diode. (g). data presentation - 31/2 digit 7 segment led of 12.7 mm height. (h). accessories - matched test tubes- 5 nos. (i). useful for determination of sulphate, phosphate, chloride, zn, ag, etc. by astm procedure. (j). extendable for measurement of inhibition growth of semantic microbial agent .brands-systronic,techlab,elko, digital conductivity meter with conductivity cell type cc-03b. (a). conductivity range : 0 to 20,200 m s*, to 2,20 & 200 m s*, (b) readability : 0.05% of range, (c) accuracy ; +_1% of range, (d) repeatability;+_1% of range, (e) data presentation: 31/2 digit 7 segment led of 12.7 mm height, (f) operating frequency: 1000hz, (g) temp. compensation: 0 to 500 c manual, (h) cell constant: 0.05, 0.1 or 1.0 (selectable), (i) out put: 20mv full scale into 10kz resistive impedance, (j) accessories: cell stand with cell holding clip.brands-systronic,techlab,elko, digital ph meter with combined ph electrode type cl - 51b (a). ph range: 0 to 14, +_1999 emf (mv), (b) readability : 0.1 ph, 1emf(mv), (c) accuracy ; +_0.01 ph, +_1 emf (mv), (d) repeatability;+_0.01 ph, +_1 emf, (e) temp. compensation: 0 to 1000 c manual, (f) data presentation: 31/2 digit 7 segment led of 12.7 mm height with polarity, (g) accessories: stand with electrode holding clamp, buffer tablets and polythine bottle, (h) physical dimensions: size 295 x 165 x 140 & weight - approximate 3, (i) manual 2 point calibration for ph, digital salinity meter (micro processor based water analyzer with magnetic stirrer), (a) measures directly ph, emf, temperature, electrolyte conductivity(ec), total dissolved solid (tds), dissolve oxygen (do), sanitary colorimeter (abs & %t) and turbidity in water sample one at a time. (b) data presentation: 2 lines 16 character dot matrix lcd modules, (c) light weight portable and easy to carry on field, (d) operates on rechargeable battery & mains supply, (e) ph: range- 0-14, readability- 0.001, accuracy - +_0.001,repeatability - +_0.1, (f) emf (mv): range- +_1999,9, readability - 0.1, accuracy - +_0.1, repeatability- +_0.1, (g) temp: range - 0-1000 c, readability - +_0.1, accuracy - +_0.5, repeatability - +_0.1, (h) ec; : range - 0-200 ms (5 ranges), readability - 0.05% of range, accuracy - +_0.1 of range, repeatability - +_0.5% of range, (i) tds: range- 0 to 100 ppt 5 range with pds factor 0.5, readability - +_0.05% of range, accuracy - +_1% of range, repeatability - +_0.5% of range, (j) do: range - 0-20, readability - 0.1, accuracy - +_0.1, repeatability - +_0.1 (k) colorimeter: range- +_2 abs & 0 to 100% t, readability - 0.001, accuracy - +_0.05 abs, repeatability - +_0.01 abs, (l) turbidity: range - 0 to 100 ntu, readability - 0.001, accuracy - +_2%, repeatability - +_0.1% (m) salinity ranger: 0 to 40 ppt, accuracy - +_1%, temp, compensation - 0 to 500c, sensor- ise (chloride) & re- bnc, (n) accessories: ce, dip type conductivity cell of 1.0 cell constant, do probe, thermo probe, magnetic stirrer, mains operated electromagnetic stirrer gi 631, stirring capsules, electrode stand with holding clamp, gas permeable membranes and 10mm & 30mm test tubes., zerological water bath superior quality(manufactures specification should be uploaded), ph meter (pocket type), brands-tamp,techlab,scientix, tds meter (pocket type) ,brands-tamp,techlab,scientix, magnetic stirrer superior quality (manufactures specification should be uploaded), heating mantle superior quality (manufactures specification should be uploaded), rainguage with measuring cylinder superior quality (manufactures specification should be uploaded), water purifier (dew drops)superior quali

Photomicrographic System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector