Latest photovoltaic solar module Tenders | Government photovoltaic solar module Tenders

Central Government/Public Sector

CTN :41704768

15 Sep, 2025 22.30 Lacs

Gorakhpur - Uttar Pradesh

Tender For supply of provision of lighting arrangement for the watch tower along with solar system at kushinagar airport : : - design and sitc of off grid solar system of 1 kwp capacity along with suitable capacity inverter and 2 nos. of 150 ah solar tubular battery along with necessary module mounting structure & civil works like foundation etc. as required at site for upssf watch tower in operational area of airport., supply of 4c x 6 sq. mm xlpe insulated & pvc sheathed, armored aluminium conductor cable of 1.1kv grade as per is 7098 (part i) 1988 with up to date amendments etc. complete as required., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required.upto 35 sq. mm (clamped with 1mm thick saddle), laying of hdpe pipe upto size 50 mm complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/hume/metal pipe as required.upto 35 sq. mm, supplying and fixing of following way single pole and neutral, sheet steel, mcb distribution board 240 v, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 6 way, double door, supplying and fixing 6 amps to 32 amps rating, single pole, 240 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive loads in the existing mcb db complete with connections, testing and commissioning etc. as required., supplying and fixing dp mcb 32 amps, double pole, rating, 240 volts, 10 ka, c curve, miniature circuit breaker in the existing mcb db complete with connections, testing and commissioning etc. as required., wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed steel conduit, with modulat switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper stranded conductor single core cable etc. as required.(group c), wiring for circuit/ sub-main wiring along with earth wire with 2x2.5 sq.mm+ 1x 2.5 sq.mm earth wire.sizes of frls pvc insulated copper conductor, single core stranded cable in surface/ recessed steel conduit as required., supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required., supply of 20 watt led batten surface mounted suitable for operation on 230 volt,50hz ac supply, complete etc as required., supply of 400 mm, 2100 rpm wall mounting swinging fan suitable for single phase 230 volt, 50 hz ac supply complete with motor, capacitor, mounting clamps etc. with all accessories as required complete., installation, testing and commissioning of pre-wired led fitting luminaries etc. of all types (surface/recessed) & street lights complete with all accessories. directly on ceiling/ wall , including connection with 1.5 sq.mm frls pvc insulated, stranded, copper conductor single core cable with flexible conduits and coupler and earthing etc. as required., installation of wall mount fan in the existing opening including making good the damage, connections, testing and commissioning etc. as required.upto 450mm sweep., supply of led street light of minimum lumen output of 3600 lumen made up of pressure die cast aluminum housing with membrane filter and have ip66 optical as well as electrical compartment with wide operating voltage range of 230+/- 10 percentage complete with all accessories as required., providing & fixing 32/40 mm dia b class gi

CTN :41725151

25 Sep, 2025 86.39 Lacs

Nagaon - Assam

Tender For construction of underground pvc distribution system spout chamber boundary fencing sign board boring and installation of tw installation and commissioning solar pv module including mounting structures construction of control room

Central Government/Public Sector

CTN :41725791

18 Sep, 2025 NA

Allahabad - Uttar Pradesh

Tender For expression of interest expression of interest for selection of a consultant for the establishment and commissioning of a solar module manufacturing plant at iti limited naini and related operations

CTN :41736633

26 Sep, 2025 57.59 Lacs

Nagaon - Assam

Tender For construction of underground pvc distribution system spout chamber boundary fencing sign board boring and installation of tw installation commissioning solar pv module including mounting structures construction of control room

CTN :41676322

16 Sep, 2025 81.60 Lacs

Garhwal - Uttarakhand

Tender For supply, erection and commissioning of 12 watt led based solar street lights with pv module 75 w, battery lithium ferro phosphate 12.8v, 30 ah in various villages/sites in district pauri with 05 years warrantee , comprehensive annual maintenance cont

State Government

CTN :41686526

15 Sep, 2025 NA

Thiruvananthapuram - Kerala

Tender For supply and installation of solar panels and related accessories- solar panel, platform and electric motor with a demonstration vehicle ,24 v/ 250 watt or more solar photovoltaic module. ,100 ah ev tubular batteries -4 nos. ,48v/ 10 amp controller ,24vto 12v dc to dc converter ,240v/ 48v charger 15amp ,harness ,,motor 1200 watt/48v ,throttle ,indication lights. 4 nos ,head light. 15 watt ,iron frame for body ,accelerator ,copper cables ,housing to fit tyres ,tyre rim. 3 or 4 no.s ,differential ,traction converter

State Government

CTN :41689346

18 Sep, 2025 1.50 Crore

Ambasa - Tripura

Tender For supply of solar pv module , inverter , tubular battery , ceiling fan , bulb

State Government

CTN :41411345

09 Sep, 2025 NA

Jaipur - Rajasthan

Tender For corrigendum : expression of interest for empanelment of vendors to undertake supply of motor pump controller set with inbuilt rmu / module mounting structure of solar pv water pumping system under pm-kusum scheme of mnre

CTN :41430559

15 Sep, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply and installation of training items for solar technician (electrical) trade under craftsman training scheme (cts) at consignee locations - measuring steel tape: 5 meter, plier: combination, 200 mm, screw driver: insulated, 4 x 150 mm, screw driver: insulated, 6 x 150 mm, screw driver: insulated, 8 x 200 mm, screw driver: insulated, 10 x 250 mm, center punch: 100 mm, electrician s knife: 100 mm, neon tester: 500 v, steel rule: 300 mm, graduated both in metric and english unit, hammer: cross peen, 500 grams with handle, chart: electrical symbol and basic electronic component, pipe vice: 100 mm, hand vice: 50 mm, bench vice: 100 mm, hacksaw frame: adjustable, 250 mm to 300 mm, hacksaw frame: fixed, 150 mm, file: flat, second cut, 200 mm with handle, file: half round, second cut, 200 mm with handle, file: round, second cut, 200 mm with handle, plier: long nose, 200 mm, plier: flat nose, 150 mm, plier: round nose, 150 mm, spanner set: double ended, 6 mm to 32 mm, set of 12, standard wire gauge: metric, portable electric rotary hammer drill machine, crimping tool: 0.5mm to 16mm , crimping tool: 2.5mm , 4mm , 6mm , crimping tool: 25mm to 400 mm , plier: side cutting, 200 mm, wire stripper: adjustable length, hammer: ball peen, 500 grams with handle, scriber: bend and straight, 150 mm, 5 tray cantilever tool box: w:d:h = 450:200:200, 20 mm, plastic tool box: w:d:h = 550:300:250, 20 mm, 7 drawer tool trolley: w:d:h = 700:450:900, 25 mm, allen key set: hexagonal, 1.5 mm to 10 mm, set of 9, scissor: 200 mm, paper, plastic handle, right hand, electrical load trainer, torque wrench: 5 nm to 25 nm, pipe cutter: wheel type, 3 mm to 30 mm, pipe cutter: for pvc pipe, upto 42 mm, engineer s square: 150 mm blade, load bank: variable, 1.2 kw, lamp/ heater type, wire cutter and stripper: 150 mm, earthing plate set, earthing electrode set, micrometer: outside, 0 mm to 25 mm, lc = 0.01 mm, tap and die set, platform trolley: 150 kg, rooftop mounting structure: 2 kw, gi, rooftop mounting structure: 2 kw, aluminium, electrical wiring and switch gear rack: training kit, protective relays and contactors trainer, demonstration board: circuit breakers and fuses, rccb with isolator, demonstration board: electrical cables, solar dc cable: 4 sq.mm, red, solar dc cable: 4 sq.mm, black, mc4 solar connector, hacksaw blade: length = 300 mm, width = 12.5 mm, thickness = 0.63 mm, tpi = 18, low alloy, packet of 100 blades, pickaxe, spade, wheel barrow: 2 wheels, 50 liters, trowel: brick, 8 inch x 5.5 inch, trowel: heart, 6 inch, trowel: plastering, 8 inch x 5 inch, trowel: pointing, 6 inch, plastic tub: 20 liter, manual earth auger, stillson pattern pipe wrench: length = 300 mm, opening = 42 mm, spanner: adjustable, 300 mm, universal quick adjustable multi-function wrench spanner set, multimeter: solar, insulation resistance tester: digital type, hydrometer, solar insulation tester: digital, pyranometer, lux meter: upto 1 lakh lux, magnetic flux meter, clamp meter: solar, soldering iron set: solar technician (electrical), thermometer: digital, 0 to 150 degree celsius, sun shine recorder, weather monitoring station, sunlight radiation meter, magnetic compass, cut model: photo voltaic cell assembly, cut model: lead acid battery, battery: lead acid, tubular, solar, 12v, 150 ah, simulator: solar cell characteristic study, iv curve tester, sun path finder, solar energy trainer with grouping of solar cells, demonstrator kit: solar tracker, solar pv e-learning software, halogen lamp with stand, bench grinder: double ended, 200 mm, solar photovoltaic module: 75 w mono crystalline module, solar photovoltaic module: 75 w amorphous silicon module, solar photovoltaic module: 250 w thin film module, solar photovoltaic module: 5w poly crystalline module, solar photovoltaic module: 10w poly crystalline module, solar photovoltaic module: 40w poly crystalline module, solar photovoltaic module: 250w, solar mppt meter, solar charge controller: dusk to dawn automati

State Government

CTN :41658749

22 Sep, 2025 NA

Delhi - Delhi

Tender For s/i of machinery and equ - single nozzle 3d printer , sla 3d printer , dual nozzle 3d printer , sls 3d printer , pcb milling machine , co2 laser cutting machine , vinyl printer , 3d scanner , lathe machine cum , milling , cnc router , belt and disc , sanding machine , scroll saw , wood turning lathe bench top drill machine , portable welding machine , computerized sewing machine , filament dehydrator , reflow oven , digital multimeter , mso 100 mhz , digital , oscilloscope , power supply , non-contact voltage , tester , lcr meter , soldering station , digital microscope , soldering rework , station , hand drill machine , cordless drilling , jig saw , miter saw , hot air gun , table saw , bench grinder , angle grinder , straight grinder , circular saw , blower , cordless screw , driver , vacuum cleaner , random orbit sander , planer , cordless vacuum , cleaner with starter , kit , rotary tool kit , rubber grip , hacksaw , l bend , t bend , multimeter , single phase motor , dol starter , esp32 microcontrollnera , ac current sensor , ac voltage sensor , relay module , connecting wires / , solar charge control1le2r , battery , inverter , lamp load , battery charger , glass fuse , solar panel , hair dryer , mixer grinder , exhaust fan

Photovoltaic Solar Module Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

State Government