Latest physical survey Tenders | Government physical survey Tenders

State Government

CTN :45706667

10 Jul, 2026 7.06 Lacs

Bhavnagar - Gujarat

Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)

Central Government/Public Sector

CTN :45722727

06 Jul, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned mix m.s. coach cutting items & various types of similar items such as , body side door m.s., p.o.h. coaches realised corroded pieces,air brake,clamp,pipe pin,m.s. door of battery box ,m.s.ventilation door,foot plate,ice box,m.s. spring,m.s. angle,and m.s. lader with rubber coating,coach cuttings, coach doors , seat frames , bearth/seat frames, light head stock cuttings, train lighting fittings,, side lamps lamp hand signal, fittings, tail lamp fittings, cft/tl light fittings, ictp/ icfp empty swich boxes tail lamps, tube light fittings, tube light jali, fan blades, fan jali, fan guards fan ribs, fan rings, empty power pannels, signal platform, destination board, valley board, letter board,ms signal base, loc, inercooler, nut bolts and other hardwares, m s furniture.m s wheel stand,window grill, ms measuring cans, tins, racks, break pipes, silencer of tower wagon, dust bin, ms pipe and cut pcs. of ms pipes, rods, ms bars released from broken constructin, compressor spring, wire /coil springs, ms rope wire, pcs. of brake beam pipes, stands, m s ferrous light junk kachra related scrap i.e ms angles, chanels, flats pcs. of cable racks/laders ms brackets, dust bin stand, tin fuse box, fire extinguisher, empty glow sign boards, empty electrical pannel, ms stand, oven, earthing patti, empty cable tray, fly catcher, galvanized patra / sheet and their cut offs, cut pieces of ms cupboards, rack etc, plain/ corrugated / toughened sheets and its cut pcs. such as strips, patties, patties, patra, rings, coils, boxes, ms brake control cover, patra, angle, small springs, pins, wire, electric point, shunt signal unit and post. signal ladder , location box, earth electrode , signal post and base , signal unit, point roddings , junction route indicator and cut pieces in mijscellaneous, coil, collapsible doors and shutters and their parts/cut offs, grills , channel grills, compound /bridge jali with or without frame, ms fencing and their parts, fencing patties, angle pcs., frames,wire mesh, g.i./ms pipes and tubes , tubes and their cut pcs, damaged gi/ ms pipes/ rods/ tubes and their pcs. , ms/galvanised boxes, junction box, switch boxes, empty convertor, payary (steps), filters, rings, nut bolts, u clips, pipe pin, gate m/c dismentled, liquid container, damaged video boxes and their cut offs, crt cabinet, location boxes , jumper, jumper box,ground connections , basket steel, water cane/ material carring trolley,steel baskets, containers, trays, frames, stretchers, nets/ jali , released ground connection, halogen, panto pans, compressor spares, dust guard, air filters and filter covers, ms/gi duct and its parts,insulating armature of signal cable, hand lamps, side lamps, signal lamps petromax, hs lamp, clamps, signal post,signal platform, signal base, ms/ gi wire/ coil, funnels, wall protectors, boxes, iron bar pcs released from broken construction , desmantelled weighing machines parts/ covers etc. ms pipe with or without ci attachment, bins, plates, rings, spares/ parts /body of weighing machine , platform weighing machine and its parts, pressure switches and other switches , signal parts, location boxes,panel board,fuse box,mdb board,pedestial for lc gate and their cut parts and other ferrous miscellaneous scrap items with or without minor nf/ss/ wooden / rubber / rexine attachments of sorts and sizes, broken and damaged, u/s for rly. use, excluding items: rail and rail pcs., axles and axle pcs., wheel tyre and pcs., cam shafts, helical springs, bolster springs, buffer plungers, face plates, axle box housings/ casings, brake beams, fish plates, screw couplings/draw bar hooks, break beams, reservoir tanks, st sleepers and other various types of similar ms items etc. note: 1. hammering/ pressing/ cutting is permitted for easy loading only, 2. if found any non-ferrous item will not be delivered (qty approx)

Central Government/Public Sector

CTN :45722728

06 Jul, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned mix m.s. coach cutting items & various types of similar items such as , body side door m.s., p.o.h. coaches realised corroded pieces,air brake,clamp,pipe pin,m.s. door of battery box ,m.s.ventilation door,foot plate,ice box,m.s. spring,m.s. angle,and m.s. lader with rubber coating,coach cuttings, coach doors , seat frames , bearth/seat frames, light head stock cuttings, train lighting fittings,, side lamps lamp hand signal, fittings, tail lamp fittings, cft/tl light fittings, ictp/ icfp empty swich boxes tail lamps, tube light fittings, tube light jali, fan blades, fan jali, fan guards fan ribs, fan rings, empty power pannels, signal platform, destination board, valley board, letter board,ms signal base, loc, inercooler, nut bolts and other hardwares, m s furniture.m s wheel stand,window grill, ms measuring cans, tins, racks, break pipes, silencer of tower wagon, dust bin, ms pipe and cut pcs. of ms pipes, rods, ms bars released from broken constructin, compressor spring, wire /coil springs, ms rope wire, pcs. of brake beam pipes, stands, m s ferrous light junk kachra related scrap i.e ms angles, chanels, flats pcs. of cable racks/laders ms brackets, dust bin stand, tin fuse box, fire extinguisher, empty glow sign boards, empty electrical pannel, ms stand, oven, earthing patti, empty cable tray, fly catcher, galvanized patra / sheet and their cut offs, cut pieces of ms cupboards, rack etc, plain/ corrugated / toughened sheets and its cut pcs. such as strips, patties, patties, patra, rings, coils, boxes, ms brake control cover, patra, angle, small springs, pins, wire, electric point, shunt signal unit and post. signal ladder , location box, earth electrode , signal post and base , signal unit, point roddings , junction route indicator and cut pieces in mijscellaneous, coil, collapsible doors and shutters and their parts/cut offs, grills , channel grills, compound /bridge jali with or without frame, ms fencing and their parts, fencing patties, angle pcs., frames,wire mesh, g.i./ms pipes and tubes , tubes and their cut pcs, damaged gi/ ms pipes/ rods/ tubes and their pcs. , ms/galvanised boxes, junction box, switch boxes, empty convertor, payary (steps), filters, rings, nut bolts, u clips, pipe pin, gate m/c dismentled, liquid container, damaged video boxes and their cut offs, crt cabinet, location boxes , jumper, jumper box,ground connections , basket steel, water cane/ material carring trolley,steel baskets, containers, trays, frames, stretchers, nets/ jali , released ground connection, halogen, panto pans, compressor spares, dust guard, air filters and filter covers, ms/gi duct and its parts,insulating armature of signal cable, hand lamps, side lamps, signal lamps petromax, hs lamp, clamps, signal post,signal platform, signal base, ms/ gi wire/ coil, funnels, wall protectors, boxes, iron bar pcs released from broken construction , desmantelled weighing machines parts/ covers etc. ms pipe with or without ci attachment, bins, plates, rings, spares/ parts /body of weighing machine , platform weighing machine and its parts, pressure switches and other switches , signal parts, location boxes,panel board,fuse box,mdb board,pedestial for lc gate and their cut parts and other ferrous miscellaneous scrap items with or without minor nf/ss/ wooden / rubber / rexine attachments of sorts and sizes, broken and damaged, u/s for rly. use, excluding items: rail and rail pcs., axles and axle pcs., wheel tyre and pcs., cam shafts, helical springs, bolster springs, buffer plungers, face plates, axle box housings/ casings, brake beams, fish plates, screw couplings/draw bar hooks, break beams, reservoir tanks, st sleepers and other various types of similar ms items etc. note: 1. hammering/ pressing/ cutting is permitted for easy loading only, 2. if found any non-ferrous item will not be delivered (qty approx)

Central Government/Public Sector

CTN :45724942

20 Jul, 2026 26.89 Lacs

Dipka - Chhattisgarh

Tender For supply of control unit assy se57110 , horn unit se57392 , sensor cable assy se53922 , sensor cable assy se53944 , sensor cable assy se53727 , sensor cable assy 20ft se59276 , dcp cylinder 20kg se57510 , nitrogen cylinder assly 0 point 5 lit se57112 , nitrogen cylinder assly 0point 5 litre se57549 , end of line resistor unit se53799 , pilot cylinder assy gl se57146 , pilot cylinder assy se57322 , dry chemical powder 1 no dry chemical powder packed in 1 kg se53753 , co2 cartridge 300 gm se53994 , rupture disc assy dcp cylinder se54686 , sensor mounting clip se54462 , nozzle bracket assy se543231 , teflon bush se543351 , dust cap se53835 , nozzle conical se535082 , main cable assy se57118 , main cable assy se57570 , main cable assy se57189 , main cable assy se573741 , pipe cross 4 way se535123 , pipe cross mtg bracket se54115 , m6 x 125 bolt se53625 , m8 x 65 bolt se53610 , m8 nut se53611 , star washer se58193 , cylinder clamp se57491 , m6 boss se53636 , m6 spring washer se53626 , coupler 1by2 inch se53518 , elbow 1by2 inch se535021 , 3by4 inch elbow with chuknut se53630 , 3by4 inch coupler se53570 , tee 3by4 inch bsp se53757 , 3by4 inch hose assy 4000 mm se5352221 , 3by4 inch hose assy 2000 mm se5352222 , 3by4 inch hose assy 1800mm se5352223 , 3by4 inch hose assy 1200mm se5352224 , 1by2 inch hose assy 800 mm se5352212 , 1by2 inch hose assy 1100 mm se5352216 , 1by2 inch hose assy 1000 mm se5358418 , 1by2 inch hose assy 1500 mm se5352210 , 1by2 inch hose assy 1600 mm se535845 , 1by2 inch hose assy 1700 mm se5352214 , 1by2 inch hose assy 1800 mm se535229 , 1by4 inch hose assy band on one end 700mm se5352279 , 1by4 inch hose assy band on one end 4000mm se5352243 , 1by4 inch hose assy band on one end 3500mm se5352227 , 1by4 inch hose assy band on one end 5000mm se5358497 , clean agent cyl assy 6kg pneuvalve se59277 , dcp cylinder mounting bracket se57519 , portable cylinder se53836 , override unit se54453 , control unit mtg bracket se57120 , nitrogen cylinder assly se57480 , distributor 5 way se535121 , over ride unit bracket se57117 , decal ground level se544681 , decal cabin se54469 , nut m6 se53634 , m10 nut se53606 , m10by40 bolt se53605 , m6 x 25 bolt se53681 , m10 x 25 bolt se53679 , m8 x 20 bolt se53608 , m8 spring washer se53609 , m10 spring washer se53607 , 3by4 inch hose assy with l bend one end 2500mm se5352262 , 1by2 inch hose assy 2000 mm se535849 , 1by4 inch hose assy l bend on both end 1800mm se5352234 , main cable assy se57281 , sensor cable assy 30ft se53729 , dcp cylinder 125 kg se57186 , clamp for dcp cylinder se57185 //bid details 2 / 65

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government/Public Sector

CTN :45680010

10 Jul, 2026 NA

Multi City - Multi State

Tender For auction sale of - provision for installation and operation of relaxation massage chair at kanjur marg station central railway. bidders are advised to physically survey the location prior participating in e-auction.

State Government

CTN :45669079

08 Jul, 2026 7.24 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at vadi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45669080

08 Jul, 2026 5.38 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at thebi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45675246

07 Jul, 2026 5.87 Lacs

Amreli - Gujarat

Tender For installation of various instruments at raidy & dhataravdi-1 irrigation scheme - item no.1:- providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss- 304/ss-316 plate with thickness of 3-5 mm, and be suitable for measurement ranges of approximately 0-50 l/s depending on notch angle. the weir shall have ±1% fullscale reading accuracy, operate under 5-100% humidity, temperature -20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , item no.2:- providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge. , item no.3:- providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks, centering, scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. (c ) concrete grade 1:2:4 and msa-40 mm(graded)

CTN :45654244

03 Jul, 2026 14.94 Lacs

Kanchipuram - Tamil Nadu

Tender For providing new borewell, pumpset with all allied materials and pumping main lines to mettur indra nagar in somangalam panchayat, kundrathur panchayat union, kancheepuram district under panchayat union general scheme funds of the year 2026-27 - charges for conducting geo physical survey, drilling of borewells anywhere in tamilnadu including transportation from one place to another with in tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( site will be shown by the twad board officers) including construction of mud pit. - 0m to 60m depth, 60m to 90m depth, 90m to 120m depth, reaming of 150mm dia borewell to 300mm dia borewell as directed at site - 0m to 60m depth, 60m to 90m depth, 90m to 120m depth, labour charges for inserting casing pipe supply & packing of pebbles, supply & delivery of 150mm dia pvc plain casing pipe as per is 12818 / 2010, supply & delivery of 150mm dia pvc slotted casing pipe as per is 12818 / 2010, supply & delivery of 160mm dia pvc end cap, charges for developing the borewell using air compressor in hours of 300 cfm capacity, construction of bore pit including all labour charges, supply & delivery of vertical type submersible pump set discharges : 200m & 50 lpm for 150mm dia borewell as per is 8034, supply & delivery of control panel board suitable for three phase submersible motor with two level guard & auto start, supply & fixing of 50mm gi pipes, supply & fixing of 50mm gi coupling, supply & fixing of 50mm gi elbow, supply & fixing of 50mm gm gate valve, supply & fixing of 50mm gm nr valve, supply & fixing of 50mm gi flange set, supply & fixing of 50mm ms clamp set, supply & fixing of 50mm gi union, supply & fixing of gi reducer heavy -65mm x 50mm, supply & fixing of gi reducer heavy -80mm x 65mm, supply & fixing of pvc threaded coupler -90mm x 80mm, supply & fixing of 4.00 sqmm 3 core flat type copper cable as per is 694/1990, erection chagres to new submersible pump set & fixing of new control panel board, supply, delivery, laying and jointing of 90mm dia pvc 4ksc pipes including earthwork excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by twad board officers, supply & fixing of pvc specials as per bis 10124 / 1988 part 1 to 13 & bis 7834 / 1975 with isi marks to site of works - 90mm pvc bend, supply & fixing of pvc specials as per bis 10124 / 1988 part 1 to 13 & bis 7834 / 1975 with isi marks to site of works - pvc threaded coupler -90mm x 80mm, supply & delivery of gi pipes medium class as per is 1239 / part 1 / 1990 with isi marks to site of works - 80mm dia gi pipes, supply & fixing of gi specials with isi marks to site of works - 80mm dia gi elbow, supply & fixing of gi specials with isi marks to site of works - 80mm dia gi coupling, laying and jointing of gi pipes with gi specials and pvc specials etc

Physical Survey Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors