Latest piano wire Tenders | Government piano wire Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45741854

15 Jul, 2026 3.00 Lacs

Shahjahanpur - Uttar Pradesh

Tender For supply of ht bolt full thread size make unbrako , rubber oil seal siz , red oxide metal primer make burger , anti sulpheric off white paint make burger , old cloth cotton dhoti leanth five mtr , roller grooving tool carbide tip , ht bolt with nut full thread size , hss tool bit , rubber oil seal size , ht bolt full thread size , piano wire size , ms bolt size , lead wire size , angle grinder , emery paper , rubber oil seal , cotton waste , rubber cord , emery tap rough , carbide tip v shape , emery cloth rough , graphite powder , ag cutting wheel , blue tube paste , heavy duty wire braided rubber hose pipe , ms hex bolt full thread size , ms hex nut size , grinding wheel rough size , valve grinding paste , darati best quaility , silicon bronze rod , rubber oil seal , painting brush size , spring steel flat iron size , painting brush size inch is , ht bolt with nut full thread siz , emery pepar , split pin , ms bolt size12mmx40mm full thread , carbon steel flat iron size , split pin size , painting brush size inch , emery cloth fine no

State Government

CTN :45705912

30 Jun, 2026 NA

Gohana - Haryana

Tender For fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre ,manhole chambers providing and fixing sfrc manhole covers and frames marked with is: 12592 including setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the engineer-in-charge. 1. type:- extra heavy duty set (ehd-35) 560mm clear opening, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. 1. all kinds of soil ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size) .,steel reinforcement steel reinforcement for r.c.c. work, where not included in the complete rate of rcc, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level note: reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. thermo-mechanically treated bars of grade fe-500d or more,brick work brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor iv level in all shapes and sizes in : 1. cement mortar 1:4 (1 cement : 4 coarse sand)

State Government

CTN :45701688

06 Jul, 2026 NA

Aurangabad(Bh) - Bihar

Tender For short tender notice for purchase and supply of laboratory equipment in different colleges in aurangabad. - district planning office, aurangabad. - arc indicator medium, carry foster bridge, camera lucida mirror type, bar pendulum tron, bending of beem app, boyle law app double and routine, dynmo model ac/dc superior qulity, double incline planl teak wood, inertia table app, incline plane 4" aluminum arc, k-constant spring app. alum scale, hook 5 law app big size 12" glass, jagger app complete, logic gate, maxwell vibration needle brass, mew app, model of bio gas plant, model of newton law of cooling universty, post office box brass, reading telescopee, , tangent glavanometer bras deluxe, surface tension app, searle app brass, screw guage(25mm), ring ball app, pin hole camera, newton second law, newton first law, model of wind mill, model of traffic light signal controller, model of solar system electric, model of phase of moon, model of newton colur disk, model of four stroke petrol engine, hydero power turbine, gold leaf electroscope, fraction board app, electric bell, electric, 29 newton third law, spectrometer, comutatr, tunning forks (original), high resistance coil 10ohms, connecting wires, wooden stands v-shape, wooden screens black and white, geometry boxes 1 big), deflection of sound, resistance boxes 500 ohms, meter bridge, p-n junctions diode kit, plug keys (two-way), magnetic needles, tangent galvano meter, digital multi meter(superior), bar magnets(4 inches), transistor characteristics, spring constant apparatus, battery eliminator, 12volts, ammeter, volt meter, object stand of wire mesh, haguer app, galvanometer, specific gravity bottles 25ml b/s/g), soldering gun gum, lead wire, velocity of sound in air apparatus, stop clocks, magnetometer compass, copper calorimeter, tripod stands, 6x4, rheostat, 8" brass, potential meter, manganese wire, nichrome wire, soldering lead, weighing machine, resistance wire, filterpapers, ohm's law apparatus, solar cell, zenor diode app, spring balance tubuler, potestion meter 10 wire, physcis chart set of 15, three kinds of levers, pulleys (simple machines), dynamo (hindi-english), refraction of light by a prism [hindi-english, petrol engine, the steam engine, pascal's law, newton's laws of motion, light (hindi-english), refraction of light, archimedes principle, reflection of light from mirror, refraction of light through lenses, heat & temperature, sound, chemistry, test tube-15 x125 mm, borosil, glass, watch glass-3"dia, burette-50ml-screw type stop cock, borosili, conical flask-250ml-borosil glass, pipetto-20ml with one mark borosil class, measuring cylinder (100nil) with spilt cork-, borosil glass, retort stand plastic with clamp, reagent bottle-250ml, narrow mouth, indi glass borosil, reagent bottle-125ml, indian glass, narro mouth borosil, test tube-25 x 150 mm (boiling, tube) borosil, atomic model senior polylab, compound microscope- with 2 eye pleces. obj.(151), brush no "0", dissection needles, beaker-250ml-plastic, petri dish 4" dia, imported borosil glass, petri dish-polythene-4" dia, cork borer set-set of 6 sizes, brass, regular, rubber cork-one holed, cover slips-pack, filter paper-sheets, dessicator-6" dia, indian glass, with lid, chromatogrphy paper-sheets, mortar & pestle-set, porcelene, test tube stands (plastic), ipps app 500 ml plastic, model of crystel,, model of grafid, model of dimond, sprit limp s.s, bunsen surener with stop cork, gas tape 2 way, rubber cork mix, spatula 6 ss, flask round bottam 250 ml borosil, flask round bottam 500 mi borosil, flask flat bottam 250 ml borois!, falsk flat bottam 500 ml borois!, flask volumetric 250 ml borosil, beaker 250 ml boroisl, beaker 500 ml borosil, funnel 3" borosil, thisel funnel 12", cavity slide 2 cavity, rubber tubing, magnesium ribbon, gas jar 6x2 plastic, capillary tubes packet, thermo meters lab, chemistry chemical, manganese dioxide 500 gm, barium chloride 500 gm, ferric chloride 500 gm, silver nitrate

CTN :45690696

04 Jul, 2026 NA

Delhi - Delhi

Tender For supply of 4 core 50 sqmm cable , bulb 9 watt , hanging holder , multiple socket board , top 5 amp , 15 amp two way switch , change over 200 amp , flexible wire , 1 inch pipe for drone obstacle , 1.25 inch pipe for drone obstacle , 1 inch round for drone obstacle , pipe bending for drone obstacle , nut bolt for drone obstacle

State Government

CTN :45693816

23 Jul, 2026 NA

Panchkula - Haryana

Tender For purchase of machinery/equipment for electrical trade for up-gradation of govt. quality marketing centre faridabad under trade infrastructure for export scheme(ties). - purchase of machinery/equipment for electrical trade for up-gradation of govt. quality marketing centre, faridabad under trade infrastructure for export scheme(ties)., salt spray chamber, digit mega ohm meter (0-250-500-1000-2500-5000 v selectable), glow wire test apparatus (test temp. range: 0-950 c selectable), kelvin double bridge (with accessories 1 dc source 2 spto reflecting galvanometer, digital), oxygen index test set, smoke density test apparatus, torsion test apparatus, digital optical measuring system (advanced vision system for dimension measurement)testing sample ranger 0-150 mm along with:-, insulation resistance tester-5kv, high voltage test set-2 kv dc, micro ohm meter-0-20 k ohm, ac breakdown tester-100 kv ac, universal bending compression tensile test 5 kn

CTN :45678714

11 Jul, 2026 5.50 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of wooden hand wire brush 3 inch x 6 inch , teflontape 3or4inch x 10mtr , rustolene pidilite make 500ml , holdite 500 gm pack pidilite make , grinding wheel ag 4 inch carborandum universal make , grinding wheel ag 7 inch carborandum universal make , brasso liqued in tin of 100 ml , araldite in 1.80 kg , emery cloth in 500 sheet fine carborandum universal make , emery cloth in 500 sheet rough carborandum universal make , emery tape 50 mtr roll size 2 inch fine carborandum universal make , emery tape 50 mtr roll size 2 inch roughcarborandum universal make , cotton waste , m seal 1 kg pack astralorpidiliteor m m make , blue tube 15ml atlas orcamel make , piano wire , graphite powder fine , hacksaw blade double side 1or2inch x 12 inch hss miranda make , hacksaw blade double side 1or2inch x 12 inch low carbon steel , marken cloth cotton , conical grinding wheel 1inch x 2inch , grinding wheel 1.5 inch , buffing wheel 4inch for ag 4 grinder boschor dewalt make , cutting wheel 4inch for ag 4 grinder boschor dewalt make , cutting wheel 14inch boschor dewalt make , silicon brazing rod size 3mm , klinger make b-9 borocilicate gauge glass imported and plane , stainless steel plate grade 304 plain sheet size 4 feet x 8 feet x 3 mm thickness , anabond 112 thread locker 50 ml , loctite 609 retaining compound in 50ml , loctite 641 retaining compound in 50 ml , emery paste rough 400 gm carborandum universal make , emery paste fine 400 gmcarborandum universal make , brass solid round bar extruded quality size 20mm od , brass solid round bar extruded quality size 25mm od , brass solid round bar extruded quality size 50mm od , boiler gauge glass bishop make size 3or4inch x 16.5 inch , boiler gauge glass bishop make size 3or4inch x 22.5 inch , solenoid valve with coil rotex make model no 3012 two way , solenoid valve with coil rotex make model no 3013 one way , stag jointing paste type b red in 1 kg pack , galva coating gcs 73 bright finish make aerotech 500 ml , grinding wheel black for bench grinding machine size 1.5inch x1.5 xinch x12inch , grinding wheel green for bench grinding machine size 1.5inch x1.5 xinch x12inch , usha martin make steel wire rope 3or4inch,6or36 construction hemp core with test certificate 305mtr in one roll , love joy coupling set l-70 , love joy coupling set l-75 , love joy coupling set l-90 , love joy coupling set l-100 , love joy coupling set l-110 , spring washer bbbb make size 3or8 inch 100 piece per pack , spring washer bbbb make size 1or2 inch 100 piece per pack , spring washer bbbb make size 5or8 inch 100 piece per pack , spring washer bbbb make size 18mm 100 piece per pack , split pin champion make size 1or4 inch x 2 inch 100 piece per pack , split pin champion make size 1or4 inch x 2.5 inch 100 piece per pack , split pin champion make size 1or4 inch x 3 inch 100 piece per pack , anabond 666-250ml , leather hand gloves pair ador or asha make , rubber star for coupling set l-70 , rubber star for coupling set l-90 , rubber star for coupling set l-100 , rubber star for coupling set l-110 , paint brush size 2inch , paint brush size 3inch , paint brush size 4 inch , red oxide primer british paint-asian make 20ltr drum , borex powder suhaga , graphite fire crucible 120 kg ,make india super -double kabootar , ss flat grade -305 size -12mm x 65mm , silver rustam brazing flux 500gm , sleeve 3or4 inch nationalorleader make for tubular gauge glass , rubber cone 3or4 inch nationalorleader make for tubular gauge glass , flexible hand grinder for 2 inch wheel sf-2 model alond with shaft raly wolf 10fd accessories , wire rope u clamp heavy duty size 3or4inch , monarch save past tpxt-high temp titanium putty ,working temp 500centi complete kit , needle roller bearing axk4060 with sleeve , needle roller bearing axk7095 with sleeve , needle bearing ba1816 with sleeve , rubber oil seal 65x85x10 spring loaded oskoorsunnyormykoda make , rubber oil seal 42x55x8 spring loaded oskoorsunnyormykoda make , rubber oil seal 42x72x10

State Government

CTN :45411968

29 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For corrigendum : construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm th

CTN :45640074

13 Jul, 2026 2.12 Lacs

Azamgarh - Uttar Pradesh

Tender For supply of rubber sheet black 3mm , rubber sheet black 6mm , grinding wheel 100mm , grinding wheel 125mm , grinding wheel 175mm , cutting wheel 100mm , cutting wheel 125mm , cutting wheel 175mm , buffer disc 100mm , buffer disc 125mm , graphite powder , old dhoti , markin cloth , cotton waste coloured , steel wire rope 19mm , round bar en 8 , shaft en 8 65mm , shaft en 8 110mm , sling belt 5 ton , toughened sight glass , loctite 641 , m seal , teflon tape , painting brush 3 inch , painting brush 4 inch , leather hand gloves , rubber hand gloves , piano wire , ms split pin 6x40mm , ms split pin 6x65mm , pencil grinder wheel , cold galvanized spray , molycote z powder , holdite 500g , steel wire rope 10mm , annabond 666 , rustoline 500ml , en 8 square bar 20mm , ceramic wool , brake liner , blue tube , emery paper rough , emery paper fine , emery cloth fine , emery cloth rough , emery tape 4 inch rough , emery tape 2 inch fine , araldite 180g * /bid number : gem/2026/b/7692350 + /dated: 20-06-2026 ' ' / bid document 1 / 39

CTN :45635364

06 Jul, 2026 5.00 Lacs

Najibabad - Uttar Pradesh

Tender For supply of hardware items - en 8 round of different size iso/c45e with mt certrificate , m.s round of different size iso 630/1980 , m.s. square of different size iso 1035-1980 , m.s plain washer of different size iso-7089 , spring washer flat saction of different size din-127/7980 , s.s. washer of different size. din-125a/ iso-7089 , spring washer bbbb/ssss of different size din-127/7980 , alluminium rivit of different size iso 15983a , hexa blade (miranda) size 1/2inch x 12inch iso-2336 part 1 & 2 , klipko make hose clamp of different size , spring steel flat 5 x 35 mm , split pin champion make of different size , red lead diwaldi make , white lead shakura make , m.seal (mahindra & mahindra make) , holdite compound in 500 gram , rustoline in 500 gram , shallack compound ellofic/pidilite , araldite (1.8 kg) , graphite powder , thread seal tape champion make size 3/4 inch (taflon tap) , emery tape carborandum make (rough) size 1 inch(roll of 50 mtr) , emery tape carborandum make size 1.5 inch (roll of 50 mtr) , emery tape carborandum make size 2inch (roll of 50 mtr) , emery cloth carborandum make no.50 , emery cloth carborandum make no. 80 , emery cloth carborandum make no. 100 , lead wire size 0.5mm thick , lead , locktite in 50 ml , percian blue enamel paint tube in 20ml , namda (wollen flat) size 30mm x 6 inchx6 inch , namda (wollen flat) size 1/2inchx1 inchx2 inch , brasso ( reckitt & colman make)500 ml , brass shim size 14 inch x 48 inch x 5 thou , brass shim size 14 inch x 48 inch x 8 thou , brass shim size 14 inch x 48 inch x 10 thou , brass rod different sizes , brass brazing rod size 1/8 inch , brass brazing rod size 1/4inch , brass connector with nut size 3/8 inch , brass connector with nut size 1/4 inch , brass ferrul size 3/8 inch , brass ferrul size 1/4 inch , brass connector with nut and brass ferrule size 3/8 inch , brass connector with nut and brass ferrule size 1/4 inch , s.s. plate 316 grade in all size , s.s. rod different sizes in 304 grade , stainless steel piano wire roll , internal circlip size 48 mm , internal circlip size 50 mm , internal circlip size 52 mm , internal circlip size 54 mm , internal circlip size 74 mm , external circlip size 18 mm , external circlip size 20 mm , external circlip size 22 mm , external circlip size 50 mm , external circlip size 54 mm , external circlip size 74 mm , steel wire rope 18mm (construction 6/19) tensile strength 1770n / mm square usha martin make with test certificate with hampcore , good year make flat belt size 6inchx8 ply , advani make super bond s.s. electrode size 2.5mm , annabond tube in 100 gram no. 666 , annabond retainer for bearing no. 412 , painting brush 25 mm , painting brush 50 mm , painting brush 70 mm , painting brush 100 mm , painting brush 125 mm , steel wire brush 3 inch x 6 inch , aligator type belt fastner steel belt locking size no.35 , copper pipe / tube any size , lrb pad (glass wool) size 1640mm x 1220mm x 50mm (with wirenetting) , m.s.connector forged 1/2 inchx 3/8 inch , cs hp glove valve bhel make socket weld class 800 size 1 inch , cs hp glove valve bhel make socket weld class 800 size 1.5 inch , cs hp glove valve bhel make socket weld class 800 size 2 inch , c.s. hp globe valve audco make socket welded class 800 size 1inch , c.s. hp globe valve audco make socket welded class 800 size 1.5inch , c.s. hp globe valve audco make socket welded class 800 size 2inch , hp non return valve , horixontal type socket welded class 800 size-3inch , m.s.flat different sizes , s.s. needle valve hd .5 inch , vacuum hose pipe 2.5 x 18 inch , wire braided steam hose rubber hose pipe id 3/4 inch , m.s. stud full thread 12x125mm , klinger make transparent plain gauge glass b-9 suitable for steam pressure reqd. 50kg/cm sq with gasket size 340 x 34 x 17 , m.s. socket forged steel 1 inch , welding glass plain (white) , welding glass plain (black) , welding hand gloves , cotton waste best quality (colour) , h.p.steam hose connection 1/4inch x 4 mtr

Piano Wire Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government