Latest pid controller Tenders | Government pid controller Tenders

CTN :45717006

13 Jul, 2026 3.34 Lacs

Bulandshahr - Uttar Pradesh

Tender For tender for supply of l1 600 thermowell 8x300 mm (connecting fitting 1/2 inch) furnace temperature , 20 selec make , pid controller(honey well-1040) , push fitting 1/2 inchx8mm , push fitting 1/4 inchx8mm , 3 way manifold for dpt level transmitter , 2 way manifold for pressure transmitte , red thermometer alcohol filled , (0-110 c) length-12 inch , push fitt connector 1/4inch tube size 10mm janatics make , push fitt connector 1/4 inch tube size 8mm janatics make , pressure gauge dia 6 inch 3/8 inch fitting heavy duty s.s. (h-guru make) , 8mm thickness , 200mm lenght rtd , (ptx100) , 8mm thickness , 200mm lenght rtd , pneumatic positioner air to open (4-20) ma single direction , level transmitter for open tank(raw juice) abb make size-1/2 inch- , 1/2 inch-od nptm connector , rotary disc valve 1/2 inch (airmax make) , rotary disc valve 1/4 inch (airmax make) , push fitting t type -1/2 inch , heavy duty pressure gauge having ss-316 internal fitting & body range (0-28) kg /cm2 dial size -6 inch , 3/8 inch bsp bottom fitting (h guru make) , temperature gauge mercury filled stem type having copper/ss internal fitting range (0-120 c) (h-guru make)

CTN :45709274

10 Jul, 2026 NA

Thrissur - Kerala

Tender For supply, installation, testing and commissioning of hydrological, soil moisture and water flow monitoring instruments - woltman type water meter, tensiometer, soil moisture sensor, redox potential sensor, ultrasonic water level, sensor - radar based, ultrasonic flow velocity, sensor - radar based, infiltrometer, supply and installation of parshall flume (6") , discharge measurement 0.1 to 8.7 i/s, supply and installation of parshall flume (12") , discharge measurement 0.9 to 49 i/s, automation of water level recording system in parshall flume.

CTN :45714938

13 Jul, 2026 1.40 Lacs

Rampur-Up - Uttar Pradesh

Tender For tender for supply of repairing overhauling , calibration recommising of multichannel temperature indications , rewiring commissining of digital display system , repairing , calibration & commissining of high/low alarm system on boilers , repairing calibration commissining of steam measurement system , repairing rewiring calibration of super heated steam temp monitoring , reparing calibration of differential pressure transmitter , reparing calibration of flow indicator cum totalizer , repairing calibration commissining of steam measurement system , repairing calibration of old pid controller , amc of various wiring commissioning of temp monitoring point , air filter , onoff control valve , wheel valve , brass adapter , onoff digital controller , solonoid valve , temp compensating cable , temp sensors , needle valve size , installation commissioning , air filter , onoff pneumatic control valve , wheel valve , instrument cable , pid controller level indicator , solonoid valve , temperature gauge , high pressure pipe , oil pocket thermowells , digital temp indicator , pressure gauge , pressure gauge , pressure gauge , vacuum gauge , temperature gauge , socket

CTN :45725361

14 Jul, 2026 8.95 Lacs

Mau - Uttar Pradesh

Tender For supply of vacuum gauge 6 inch dial , vacuum gauge 4 inch dial , pressure gauge 4 inch dial , pressure gauge 6 inch dial , pressure gauge 10 inch dial , temperature gauge 6 inch dial , j type thermocouple , k type thermocouple , rtd pt100 sensor , compensating cable j type and k type , temperature indicator 0 to 600 degree c j type k type pt100 , temperature controller j type k type pt100 , turbine speed sensor with indicator 0 to 10000 rpm , high pressure valve 1.5 inch ibr 32 kg per sq cm female thread , high pressure valve 3 by 8 inch ibr 32 kg per sq cm female thread , head mounted temperature transmitter thermocouple 0 to 1200 degree c output 4 to 20 ma , level transmitter range 0 to 1000 mmwc , pid controller range 0 to 100 , power supply 24 volt dc , thermometer 0 to 100 degree c and 0 to 500 degree c three valve manifold , pneumatic relay for electro pneumatic positioner model yt1000 , temperature transmitter thermocouple 0 to 1200 degree c output 4 to 20 ma , compensating cable shielded k type 0 to 1200 degree c , digital temperature indicator 96 x 96 mm range 0 to 1200 degree c , head mounted thermocouple k type output 4 to 20 ma , vacuum gauge 6 inch dial 3 by 8 inch connection range 0 to 760 mm hg , pressure gauge 0 to 2 kg per sq cm 6 inch dial 3 by 8 inch connection , magnetic pickup sensor model mp265 , rpm meter 0 to 10000 rpm 6 inch dial , orifice plate assembly 3 inch * /bid number : gem/2026/b/7722638 + /dated: 29-06-2026 ' ' / bid document 1 / 27

CTN :45671827

15 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of ultrasonic level measurement system spares for scada system of bmc - dual channel ultrasonic level transmitter, ultrasonic level sensor units

CTN :45666967

04 Jul, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of civil lab equipments - equipments for lab, direct shear machine:standard compliance:the equipment shall conform to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size:60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assemblyproving ring with calibration charttwo dial gaugesloading weights and hangerporous stones (2 nos.)specimen cuttertool kit, auger boring (or) any boring -soil sampling apparatus: engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit), flow table test apparatus: dimensions and specifications as per is 9103, table top made from flat metal plate ,minimum thickness 1.5 mm, table top size:700 mm*700 mm ,with flatness tolerance of 1.5 mm.table top marked with: scribed cross at centre,lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top:16+_ 1kg table top base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface. minimizing bounce stop watch-digital -2 nos scale 1 mtr-2 nos mounting wooden platform 300 mm height amc for 3 years inclusive., drying oven:temperature range: ambient (room) up to 250 temperature control: digital pid controller / thermostat for accurate heating. prestogroupaccuracy: typically 1 2 c. chamber material: stainless steel inner chamber for durability and easy cleaning. air circulation: forced convection fan for uniform temperature. shelves: usually 2 3 adjustable shelves. power supply: single phase 220 230 v ac, 50 hz.

Central Government/Public Sector

CTN :45658804

04 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of eurotherm master controller (model 2604) (details as per buyer specification documents) , eurotherm slave controller (model 2604) (details as per buyer specification documents) , eurotherm pid controller model: 3216(details as per buyer specification documents)

Central Government And Public Sector

CTN :45668004

04 Jul, 2026 NA

Kalpakkam - Tamil Nadu

Tender For supply of pid controller (q3)

CTN :45647293

30 Jun, 2026 11.00 Lacs

Sonipat - Haryana

Tender For purchase of instrument spares. - purchase of instrument spares., control valve 4 (4440) (pnuecon valves make) only diaphagram for boiler super heater control vbalve. sr. no- 210970776, model 810/pdo 055t, size- 3 characterstic-linear travel-38mm, supply failure-close, guage vaccum-760 (1968) (micro/forbes marshell make) dial-6 bottom connection, bsp thread, s.s 316 bourdon tube., jumbo ceiling rose (6240) (electromed make) jumbo display flow monitor, input 4 to 20ma, power supply 230 vac with tps-24 vdc raqnge 0 to 9999. having previous, current and flow rate, pressure gauge assorted size (4665) (forbes marshall/micro make) range 0 to 10 kg/cm2, dial size-6 bottom connection , bsp thread, s.s casing and ss-316 bourdon tube, rpm indicator for pt (6618) (beacon make) range 0-10000, cut size- (92*92)mm, power supply-230vac, signal input-24 d.c. output-4 to 20ma, air filter regultor (5000) (festo/jenetics make) fitting size-1/4 range (0 ti 10kg/cm2) with gauge, air filter regulator (5000) (festo/jenetics make) air filter regulator & lubricator fitting size-3/8 , range (0 to 10kg/cm2) with gauge and lubricator., air filter regultor (5000) (festo/jenetics make) air filter regulator & lubricator fitting size-3/8 , range (0 to 10kg/cm2) with gauge and lubricator., p u connecter lock bolt (2051) (jenetics/festo make), p.v. tube 8mm (4974) (jenetics/festo make) pu tube-size 8mm, rubber sheet for pan disc charge valve (2876) (puri make) size of sheet- 654*490*25, seal kit complete set for 12 pan (5746) (puri make) for kit for 12 discharge valve, c.s. steam valve (4504) (leader/sant/wj make) for steam/impulse lines class-300, conector (2032) (jenetics/airmax/festo make) for pu tube -8mm and bsp thread, discoratry valve (2031) (airmax make) connection size-1/4 , draught gauge (vacuum) dial size-6 (circular type) range- 1000/0 mmwc, fitting size-1/2 (m) bsp bottom side make- baumer/micro (3389) (forbes marshall/baumer/micro make) draught gauge-dial size-6 range(0-1000 mmwc), s.s body and bourdon tube ss-316, bottom connection b.s.p, guage indecator temprature 0-100 (3485) (forbes marshall make) temperature gauge-dial-6: range (0-1500 c), s.s body and bourdon tube ss-316, bottom connection bsp stem length-300mm, guage pressure 0-40 kgs/600 lbs (1965) (forbes marshall/genernal make)dial size-6 , s.s. body and bourdon tube ss-316, bottom conection bsp, guage pressure 0-40 kgs/600 lbs (forbes marshall/genernal make) dial size-10 ss body and bourdon tube ss-316 bottom connection bsp, kit 3 (1798) ( puri make) model-complete set of pneumatic cylinder of discharge valve, kit 8 (1797) (puri make) model-complete set of pneumatic cylinder of discharge valve, level flow transmiter (5385) (honey well make) range-0 to 10000 mmwc, make-honey well, supply-24 vdc, signal input-4-20 ma connection-1/4 bsp, ms seamless pipe (3608) (leader/sant/wj make) for steam/impulse line (class-300) of transmitter, pu connector 6 mm (367) (jenetics/festo make) one side tube connection-8mm, other side thread connection of bsp, pid controller, 72*72 mm, i/p-rtd, o/p-two relay (no-nc) (5010) (honey well make) input/output-universal, cutsize-92*92, make-honey well, model-dc-1040, supply-220 ac, plc card inpur/output for boiler (3867) (allen bradley make) model-1762-if2/of2, plc card input/output for boiler (3867) (allen bradely make) model-1762-if4/of4, plc controller (6180)(allen bradely make) model-micrologix-830, make allen bradely, with modules, pneumatic positioner for control valve (4823) ( aira/ytc/rotex make) type:- rotary, model: e/p-1000r, i/p signal:- 4-20 ma, air supply:- 0-7 kg/ sqcm, standard stroke-10-80mm, air connection:- , pneumatic positioner for control valve (4823) (ytc/aira?rotex make) type:- linear, model:- e/p-1000l, i/p signal:- 4-20 ma, air supply:- 0-7 kg/sqcm, standard stroke-10-80mm, air connection:- , positiner relay (5933) pilot valve realy for aira positioned, pressure gauge 2 kg (4772) (forbes marshall/genernal make) dial size-6 , ss b

CTN :45643955

09 Jul, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply, installation, testing, erection and commissioning of three element automatic drum level control system along with auto control valve, pid controllers and flow totalizers for boiler application with accessories

Pid Controller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector