Latest pier Tenders | Government pier Tenders

Central Government/Public Sector

CTN :45710538

06 Jul, 2026 28.37 Lacs

Hyderabad-T - Telangana

Tender For repair of uav lab in bel-hyderabad

Central Government/Public Sector

CTN :45719626

18 Jul, 2026 40.00 Lacs

Jodhpur - Rajasthan

Tender For repair/ replacement of lt cable, lt panel and connected items in domestic area (excluding camp area), su site 1a and 1b at af stn jodhpur - excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sqm on plan and getting out in soft/ loose soil complete all as specified and directed., returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil.complete all as specified and directed., removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in any type of soils.complete all as specified and directed., m&l for sand cushioning for xlpe cable with tibba sand (one layer of 80mm thickness before laying of cable and other layer of 150mm thickness after laying of cable) and punning down to 180mm to provide a required cover complete all as specified and directed by the engineer-in-charge.note:- punned thickness only shall be measured and paid., m&l for protection to cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class b bricks complete all as specified and directed by engr-in-charge., supplying and laying un-reinforced precast concrete cable cover, class lv, type i, flat, size 250mm x 150mm x 40mm confirming to is - 5820 complete all as specified and as directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm, 4 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm, 4 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 95 sqmm, 3.5 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 150 sqmm, 3.5 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable, laid in ground with aluminium conductor, 1100 volts grade, cross-sectional area 240 sqmm, 3.5 core complete all as specified and directed., taking down of lt cable any size from trech/ gi pipe/ walls/ on ground/ street light poles complete all as specified and directed., m&l for boring of holes under road, pavement, hard stansding by using manual method with 100mm hdpe pipe complete all as specified and directed by engineer-in-charge., s&f in repair mccb 400 amp, 4 pole, 415 v, 36 ka, thermal megnatic adjustable type complete all as specified and directed., s&f in repair mccb 250 amp, 4 pole, 415 v, 35 ka, thermal megnatic adjustab

Central Government/Public Sector

CTN :45726549

20 Jul, 2026 NA

Wardha - Maharashtra

Tender For repairs maintenance of electrical and mechanical equipments high mast light search lights and other miscellaneous items at cad pulgaon - disconnecting and taking down existing unserviceable street lights/flood lights any type/watts from pole/wall and dismantling the light fittings. repairing/replacing unserviceable parts re-fixing the same on pole/wall after testing and removal of carbon from line jumpers/tightening of jumper/alignment of fitting defective street light/security light/flood lights fitting/led light from electric pole complete all as directed by eic. note: spare parts and accessories such as led driver, and connected items etc will be measured and paid separately under respective item as supply only and fixing is deemed to be included in this item., supply only led street light driver for 45 watts led street light as per make given all as specified and directed by eic., supply only led street light driver for 60 watts led street light/ flood light type as per make given all as specified and directed by eic., supply only led street light driver for 100 watts led street light/ flood light type as per make given all as specified and directed by eic., supply and fix in repair led streetlight of 45 watt comprises of pressure die cast aluminium housing & having system efficiency>123 lumens/watt i.e 5570 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k,pf>0.9,driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account. 3.the complete fitting along with led module, driver, surge protection device and all associated accessories shall be covered under 05 (five) years comprehensive warranty by the contractor from the date of invoice.make : philips/ wipro/crompton, supply and fix in repair led streetlight of 60 watt comprises of pressure die cast aluminium housing & having system efficiency>110 lumens/watt i.e 6670 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k, pf>0.9, driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic. note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account.3. the complete fitting along with led module, driver, surge protection device and all as

State Government

CTN :45497851

16 Jul, 2026 65.31 Crore

Jabalpur - Madhya Pradesh

Tender For corrigendum : construction of viaduct with pile foundation, rcc pier, rcc or psc girder and reconstruction of re wall with the replacement of backfill and ground improvements in the remaining approaches of rob at km 28.200 in the jabalpur to hiran river section of

State Government

CTN :45730181

04 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For procurement of various chemicals required for online analysers for swas lab, wtp - reference electrode fill solution, formic acid reagent, difusion tubing kit for use with dipa, sodium calibration kit, reference electrode filling solution, reagent for silica analyser, silica measurement reagent kit, di-isopropyl amine reagent bottle, chem lab annual repair chloride standard solution etc..

CTN :45716648

14 Jul, 2026 NA

Ranga Reddy-T - Telangana

Tender For supply of components for design and devp of dc servo motor characteristics , components for repair of existing klystron and gun diode test bench in microwave lab

CTN :45175529

01 Jul, 2026 NA

Jaipur - Rajasthan

Tender For bid to ras corrigendum : supply of dental materials e e - all ceramic ingotsa1 comaht coma a2 bracket ht bracket coma a3 coma bracket ht bracket a3 point 5 coma ht coma b1 bracket ht bracket two of each , suction tube sterile , syringe hypodermic cartridge type needle pkt of 100 coma size 27 g , dental stone pkt of 01 kg , mouth wash pottassium nitrate w with sodium floride 100 ml , light cure radiopaque calcium hydroxide paste , articulating paper bracket pkt of 10 book bracket , dry socket dressing material bracket alveogyl bracket , denture box , shoe cover bracket pkt of 100 bracket , modelling liquid vita bracket bott of 200ml bracket , vita dentine shade a1 coma a2 coma a3 coma a3point5 two of each , flexi cartridge , porcelain repair kit , acrylic finishing burs bracket set of 10 bracket , crucible for induction casting machine ugin , separating disc , carbide burs cylindrical for shp , carbide burs conical for shp , paracore complete kit , nano hybrid composite restorative kit , nova bone putty bone graft bracket syringe 0 point 5cc bracket , 5 percent chlorohexidine sol for rct irrigation bott of 100 ml , dental bleaching kit , flexi denture polishing kit , ceramic finishing kit , gingival barrier , teeth acrylic complete set bracket set of 28 bracket bracket shade a3 bracket , teeth acrylic complete set bracket set of 28 bracket bracket shade a3point 5 bracket , teeth set lower posterior set of 16 shade bracket a3 bracket , teeth set upper anterior set of 06 shade bracket a2 bracket , teeth set upper anterior set of 06 shade bracket a3 bracket , disposable surgeons gown , lucitone denture base resin bracket powder and liquid bracket , crown and bridge investment np alloy liquid of 1l , crown and bridge investment np alloy for box of 1kg , gtr membrane osteo health , cidex dialdehyde solution disinfectant 2 point 4 percent w slash v glutaraldehyde , die spacer , die separator , wire ss bracket 21 gauge bracket , asbestos sheet roll dental , dappen glass , ceramic build up brush , plunger for pressable ceramic , plunger separator , sodium hypochlorite bracket naocl bracket 5 point 25 persent 1 ltr , bio dash c sealer bracket 2 gm bracket , endo ice bracket endo frost bracket , matrix ban ivory with bands , tofflemier retainer with bands , rubber dam sheet bracket 6 multiply 6 bracket , start tips set for root canal irrigation bracket set of 3 bracket , sterile pouch for instruments bracket pkt of 200 bracket , povidone iodine 5 percent solution bott of 500 ml , normal saline bott of 500 ml , haemostatic sponge gelatin , all ceramic liquid bott of 1 ltr , all ceramic powder bracket pkt of bracket 160 gm bracket , glaze paste all ceramic bracket syringe of 3 gm bracket , calcium hydroxide paste braket syg 2 gm with tips bracket , silver diamine fluoride varnishing 38 percent bracket bott of 5ml bracket , e dash sdf bracket silver diamine fluoride bracket , interdental brush , fluoride toothpaste pack of 100 gm , methylated spirit for dental lab , hydrofluoric acid 5 percent , glass fiber post , self dash acrylic powder clear shade bottel of 110gm with self cure liquid 110ml , self dash acrylic powder pink shade bottel of 110gm with self cure liquid 110ml , syringe disposable plastic 5ml bracket pkt of 50 bracket , syringe disposable plastic 10ml bracket pkt of 50 bracket , syringe disposable plastic 20ml bracket pkt of 25 bracket , syringe disposable plastic 50ml bracket pkt of 25 bracket , syringe disposable plastic 2ml bracket pkt of 50 bracket //bid details 2 / 56

CTN :45427636

13 Jul, 2026 3.60 Lacs

Kolkata - West Bengal

Tender For corrigendum : repair of non-operational modules lab 1, lab 2, lab 5 and office room 2 of hrdc building

CTN :45693976

17 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply and installation of training items for drone technician trade under craftsman training scheme (cts) at consignee locations - pliers, soldering station, multi meter, binoculars, anemometer, magnifier, unassembled drone kit, unassembled drone kit - standard with hd camera & thermal camera, electricity lab, smd technology kit with wall chart, dc regulated variable programmable dc power supply, drone workbench, analog-digital circuits development platform, applied mechanics training platform, drone battery management training systems, charge controller training system, bldc (brushless dc) motor training system, inverted pendulum, drone sensor trainer kit, antenna training system, advanced microwave integrated circuit lab, gps training platform, wireless communication modules, fcb and esc training platform, drone gimbal set with motor and control, npnt compliant micro uav built for mapping and surveillance, field repair kits, drones and spare parts kit, balance charger, power distribution board, laptop latest configuration, thrust measurement meter, indoor netted facility, outdoor controlled netted testing facility, various electronic and electrical components, 3d printer, drone ( long range)