Latest pig iron sale Tenders | Government pig iron sale Tenders

CTN :45475418

15 Jun, 2026 NA

Batote - Jammu And Kashmir

Tender For rate contract for supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote for year 2026-27 or till the next year tender is finalized - supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote (per unit rate), super enameled aluminium wire swg-21 (isi mark) in exchange of scrap, super enameled aluminium wire swg-19 (isi mark) in exchange of scrap, super enameled aluminium wire swg-18 (isi mark) in exchange of scrap, super enameled aluminium wire swg-16 (isi mark) in exchange of scrap, super enameled aluminium wire swg-14 (isi mark) in exchange of scrap, super enameled aluminium wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-12 (isi mark) in exchange of scrap, super enameled copper wire swg-11 (isi mark) in exchange of scrap, aluminium strip for lt winding of sizes, copper strip for lt winding for 400 kva/630kva transformers 8/4 - 10/4.5, lt bush rod brass-complete 12 mm, lt bush rod brass-complete 20 mm, lt bush rod brass-complete 25 mm, lt bush rod brass-complete 30 mm, ht bush rod 12 mm brass for 11/0.440 kv transformer (complete), l.t bush for 11/0.440 kv transformer, 12 mm, l.t bush for 11/0.440 kv transformer, 20 mm, l.t bush for 11/0.440 kv transformer, 25 mm, l.t bush for 11/0.440 kv transformer, 30 mm, ht bush 12 mm for 11/0.440 kv transformer, butter paper, cotton tape 1 roll, rubberized cork sheet 4 mm thick 3x3, rubberized cork sheet 5 mm thick 3x3, cork strip 4mm, lethoride sheet, packing sheet 1mm & 1 mm, glass empire/glass sleeves 0-4mm, glass empire/glass sleeves 8-10mm, bakelite tubes of sizes (as per sample), packing gutties 1 ,1 , nuts and bolts for transformer of sizes, insulating varnish dr. beck, old cotton sarees/ waste, wooden wedges size, ht washers, lt washers m-20, lt washers m-25, lt washers m-12, ht bush clamps ( bimetallic, heavy duty), fevicol, transformer oil, three phase, 2 hp motor, filter paper pack 36 inch/3 feet, 2 kw heater 2.5 feet long, stainless steel type(u shape) tubular finned oven heating element, thermostat rotational type, contactor ml-2, 3-phase motor 1.5 hp, filter packs 2 feet micro, thermostat 0-110, indicator (ryb) big, sproket set 92x25x25, sproket 25, single teeth, chain 10 feet (big), 1/2, chain 10 feet (big), 3/4, chain small 10 feet, 1/2, chain small 10 feet, 3/4, hose pipe, 1 inch, electronic weighing machine (capacity 10kg), electronic weighing machine (capacity 200kg), electric chain pulley 3 ton, electric chain pulley 5 ton with remote, contactor ml-4, steel washer for transformer-as per sample, ms clamping ring-as per sample, m-seal

CTN :45384023

09 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot non ferrous scrap - copper scrap consists of copper nozzles copper stripps copper rods cond. stater winding of copper released fro dsl poh mws izn copper pipe of radiator and other copper scrap recd from varius sources of rly deptt lying in bin no 4 (gst 18% hsn 7204)

corporations/Associations/Others

CTN :45378112

12 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For auction sale of iron sheet scrap,misc iron steel scrap (ms ),battery scrap (black),1phase/3phase/burnt/defective/ all type of meters electronic,winding wire bobin plastic scrap,relay scrap,battery charger scrap,insulatted wire/cable copper (armoured),33/11 kv capacitor cell unit scrap,insulated wire/cable allu scrap (armoured),conductor scrap mix,it e-waste scrap,16kva ue xmer (copper wound single phase without oil & stud,25 kva ue 11/0.4 kv dist. xmer( alu. wound single phase),25 kva ue 11/0.4 kv dist. xmer ( alu. wound three phase),63 kva ue dist. xmer( alu. wound without oil, without stud),200 kva ue dist. xmer (alu. wound without oil, without stud)

Central Government/Public Sector

CTN :45343051

08 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For auction sale of depot non ferrous scrap - scrap mix copper released from various spare parts of electric loco consisting of c-145 shunt c-145 tips, emc coil winding, c118 coil winding, emc contact (fixed & movable), copper link, vcb contact ring, epc blow out coil, tm shunt, ba panel copper pipe, released winding copper of battery charger, ba panel copper link qf shunt, hom shunt, shunting coil & miscellaneous items solid or broken condition sort & size

CTN :45312053

02 Jun, 2026 50.00 Lacs

Kishtwar - Jammu And Kashmir

Tender For supply of materials required from time to time for the repair of damaged distribution transformers in electrical division kishtwar during the year 2026-27., se almunium winding wire (round) in sizes 12 to 21 swg, dpc almunium winding wire (round) in sizes 12 to 21 swg, dpc almunium strip of sizes for lv winding of distribution transformers capacity 25kva to 250kva, se almunium winding wire (round) in sizes 12 to 21 swg (in exchange of one kg of scrap including insulation coverage i.e.salvaged conductor), dpc almunium winding wire (round) in sizes 12 to 21 swg (in exchange of one kg of scrap including insulation coverage i.e.salvaged conductor), dpc almunium strip of sizes for lv winding of distribution transformers capacity 25kva to 250kva (in exchange of one kg of scrap including insulation coverage i.e. salvaged conductor), se copper winding wire (round) in sizes 11 to 22 swg, dpc copper winding wire (round) in sizes 11 to 22 swg, dpc coppper strip of sizes for lv winding of distribution transformers capacity 25kva to 250kva, se copper winding wire (round) in sizes 11 to 21 swg (in exchange of one kg of scrap including insulation coverage i.e.salvaged conductor), dpc copper winding wire (round) in sizes 11 to 21 swg (in exchange of one kg of scrap including insulation coverage i.e.salvaged conductor), dpc copper strip of sizes for lv winding of distribution transformers capacity 25kva to 250kva (in exchange of one kg of scrap including insulation coverage i.e. salvaged conductor), contactors 63a, reverse forward switch 32a, reverse forward switch 40a, insulation gum, exhaust fan 32, buy back of scrap/old brass bush rods, cork washer for lt bushings big/small, cork washer for ht bushings big/small, transformer oil ( fresh), lt rubber washers (small m12 &m 20) ( large m12 & m20), ht rubber washers, ms washers for lt, gutka for ht bush, combination spanner set 25-1.25 (25 ppieces), gum shoes 7/8/9 no., protective ppe gear with goggles, industrial dangri uniform, cotton tape 1 (size) length 25mtr., nawar tap 1 (size), old cotton sari/ cloth, rubberized cork sheet 4mm thick, rubberized cork sheet 5mm thick, cork strip 5mm thick, lathoride paper, electrical grade kraft paper, packing sheet 1 mm, packing sheet 1.5mm, varnish dr. beck, m seal, fevicol / insulation gum, glass wool sleeves of sizes, bakellite tube 1/2 inch ,1/4 inch (1 mtr), packing gutties, manual operated oil pump, clamp tester digital, ms nuts and bolts full thread size 1/2 to 3 inches, ms plugs and caps 1/2,3/4,1,1.1/4, 1.1/2 confirming to relevent is code amended upto date, fire extinguishers, heating coils for electrical heaters in oven 2kw rating, film paper 7mils confirming to relevent is code amended upto date, tarpin oiil, painting brush of sizes

Central Government / Public Sector

CTN :45302368

01 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot non ferrous scrap - copper lump scrap - 98210014(13) cond.& u/s copper lump scrap consisting of tags, earth shunts, ol board items, ol board long fingers, burnt winding wire, spcc panel components, solar flat plate panels, pipe bits, earth discharge rod cable, tubes, plates, lugs, isolator male&female contact, droppers etc. available in the bins with or without insulation/attachments. total gross weight: 1123.2 kgs.; said to contain total copper content: 1093.495 kgs approx.; total ms content: 3.175 kgs approx.; total aluminium content: 0.08 kgs approx.; total brass content: 0.365 kgs approx.; total gi content: 25.2 kgs approx.; total pvc/rubber/insulation/dust/others etc. content: 0.885 kgs approx. hsn code: 74040012; gst@18% on forward charge basis. note: 1) delivery on actual weighment basis only. 2) segregation not permitted. 3) purchasers/firms are requested to physically inspect the lot before offering their bids. 4) ) post auction no representation shall be entertained. 5) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 6) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. 7) railways does not guarantee for quality, quantity description etc.location: non-ferrous ward bin no: 9&19.

State Government

CTN :45146120

25 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - 3 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 3 h.p. submersible pump set with column pipe from bore well, cost towards rewinding and repairing of 3 h.p submersible motor with s/f suitable winding wire, bronze bush etc. all complete after the deduction of cost of scrap materials., cost towards repairing of 3 h.p. submersible pump with s/f bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 40 mm dia. upvc column pipe., cost towards supplying and fitting (1) 40 mm dia g.m. full way valve 1 no (2) 40 mm dia nr valve 1 no (3) 40 mm dia g.i. bend 2 nos. (4) 40 mm dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrap materials., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., supplying and installation suitable size panel board for 3 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., providing all labour, tools tackles and technicians for lowering of 3 h.p submersible pump set with all accessories in the bore well, 5 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 50 mm dia. upvc column pipe., supplying and installation suitable size panel board for 5 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., providing all labour, tools tackles and technicians for lowering of 5 h.p. submersible pump set with all accessories in the bore well, 7.5 h.p. submersible set -, providing all labour, tools, tackles and technicians for taking out 7.5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 7.5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 7.5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., providing all labour, tools tackles and technicians for lowering of 7.5 h.p. submersible pump set with all accessories in the bore well, transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., provision for leakage repairing of different size of upvc sch- 80 pipe in place of existing / cracked and damaged pipe of isi approved make or equivalent make damaged pipe in trenches and replacement of pipe and fitting so as to give 1 m average cover over the socket of pipes with disposal of exc

CTN :45203461

04 Jun, 2026 10.00 Lacs

Bhopal - Madhya Pradesh

Tender For supply of elctric item coolar repair and others items - supply of electric item, supply coolar, and plumbering item, repairing work and other item, desert cooler (iron body) complete 90 100 liters, desert cooler (fiber body) complete 90 100 liters, desert cooler (iron body) complete, 70 80 liters, desert cooler (fiber body) complete, 70 80 liters, room cooler (iron body) complete, 40 50 liters, room cooler (fiber body) complete, 40 50 liters, cooler motor (copper winding), all capacity, cooler pump, all capacity, cooling pad (wood wool / honeycomb), fan blade / cooler fan, air deflector / front grill (jali), motor stand / clamp, bearing (motor/fan), capacitor, belt (if applicable), water tank repair / replacement, float valve, drain plug, overflow pipe, water distribution pipe system, switch board with regulator, electric wiring work, mcb / fuse protection, earthing wire, 3 pin plug top, wheel / stand, iron body repair (welding, painting), fiber body repair (crack fixing), installation charges (new cooler), transportation charges, complete servicing (cleaning, repair, testing & commissioning), old cooler repair (complete overhauling) per unit, disposal of scrap / old parts, warranty on parts & service minimum 1 year, new cooler technical specification (air delivery, power, copper motor), rate inclusive of all taxes, ceiling fan new, 48 inch / 1200 mm, wall fan new, 16 inch / 400 mm, ceiling fan motor, wall fan motor, fan blade (ceiling/wall), capacitor (fan), fan regulator, oscillation mechanism (wall fan), fan guard / grill (wall fan), down rod (ceiling fan), shackle / clamp kit (ceiling fan), fan wiring & installation, fan repairing / servicing (complete), bearing replacement (fan), fan cleaning & overhauling, pvc pipe 1 inch, pvc pipe 1.5 inch, pvc pipe 2 inch, pvc pipe 3 inch, pvc pipe 4 inch, pvc elbow 1 inch, pvc elbow 1.5 inch, pvc elbow 2 inch, pvc elbow 3 inch, pvc elbow 4 inch, pvc tee 1 inch, pvc tee 1.5 inch, pvc tee 2 inch, pvc tee 3 inch, pvc tee 4 inch, pvc socket 1 inch, pvc socket 1.5 inch, pvc socket 2 inch, pvc socket 3 inch, pvc socket 4 inch, pvc reducer 1x inch, pvc reducer 2x1.5 inch, pvc bend 2 inch, pvc bend 3 inch, pvc bend 4 inch, pvc door tee 2 inch, pvc door tee 3 inch, pvc door tee 4 inch, pvc p trap 1.5 inch, pvc p trap 2 inch, pvc floor trap 4x4 inch, pvc floor trap 5x5 inch, pvc nahani trap standard size, pvc end cap 1 inch, pvc end cap 2 inch, pvc end cap 3 inch, pvc end cap 4 inch, pvc pipe clamp all sizes, pvc solvent cement 100ml, pvc solvent cement 250ml, cpvc pipe inch, cpvc pipe inch, cpvc pipe 1 inch, cpvc elbow inch, cpvc elbow inch, cpvc elbow 1 inch, cpvc tee inch, cpvc tee inch, cpvc tee 1 inch, cpvc socket inch, cpvc socket inch, cpvc socket 1 inch, cpvc union inch, cpvc union inch, cpvc union 1 inch, cpvc female adapter inch, cpvc female adapter inch, cpvc male adapter inch, cpvc male adapter inch, cpvc brass elbow inch, cpvc brass tee inch, cpvc ball valve inch, cpvc ball valve inch, cpvc ball valve 1 inch, cpvc tank nipple inch, cpvc tank nipple inch, cpvc tank nipple 1 inch, cpvc pipe clamp all sizes, cpvc solvent cement standard, bib cock tap inch, pillar cock tap inch, angle valve inch, concealed stop cock inch, sink cock standard size, swan neck tap standard size, ptmt tap inch, brass tap inch, shower set standard size, health faucet standard size, jet spray set standard size, connection pipe 18 inch, connection pipe 24 inch, connection pipe 36 inch, waste coupling standard size, bottle trap 1.25 inch, flush valve standard size, western commode standard size, indian toilet seat standard size, wash basin standard size, urinal standard size, cistern tank 5 liter, cistern tank 10 liter, pvc flush pipe standard size, seat cover standard size, basin waste pipe 1.25 inch, mirror standard size, soap dish standard size, towel rod standard size, water tank 500 liter, water tank 1000 liter, water tank 2000 liter, ball valve inch, ball valve inch, ball valve 1 inch, tan

CTN :45188761

26 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - p.l no: 98210208.scrap copper electrolytic pure with insulation consisting of scrap copper power coil, equalizer coil with insulation including cut pieces of emu, hitachi, tao & hhp armature and copper winding rotor coil of traction alternator.qty-5000 kg. location- vm godown-2 bin-7 & 3. custodians lot no.03/09/may/2026-27/15. condition- valid cpcb registration is required to purchase the material and during delivery. loading of the materials will be performed by railway labour. weighment will be executed by electronics weight scale at vm godown-2.

corporations/Associations/Others

CTN :45298536

10 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of 3.15 mva bgp failed ptr scrap,10 kva copper wound transformer (without oil),11, 33 kv ct/pt units etc,iron steel scrap (field return), barberd wire scrap,conductor acsr/aaac scrap, insulated wires/cables scrap (pvc),fiber scrap, scrape of energy meter mechanical/ electronic/static etc,transformer leminations used,copper winding wire/coils of transformer and mo,tank empty old of transformers /ocb/vcb/equipments,unservicable vcb (11/ 33 kv) relay scrap, defective ct ring type scrape etc,battery scrap (lot ctrl)

Pig Iron Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government / Public Sector

State Government

corporations/Associations/Others