Latest pig iron Tenders | Government pig iron Tenders

CTN :45533008

20 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - retender - open gym equipment, od405580/2025-2026 horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link- made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm &8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm

CTN :45533036

20 Jun, 2026 7.99 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality

Central Government/Public Sector

CTN :45179719

17 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of pig iron grade-1 as per corp. spec. aa11301 rev. no. 04

Central Government/Public Sector

CTN :45547066

15 Jun, 2026 NA

Kalka - Haryana

Tender For supply of pig iron for foundry purpose to is: 13502/1992 (reaffirmed 2005) having undernoted composition:- manganese : less than or equal to 1.0% silicon : less than or equal to 2.25 % phosphrous : less than or equal to 0.4% sulphur : 0.06 max. mass of pig iron: 2.0 kg(min.) 12 kg (max) per piece: without notch [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45509979

18 Jun, 2026 NA

Jamnagar - Gujarat

Tender For annual work of supplying goods and materials for various branches in sikka municipality office. - second call- wpi-hr coil, hr coil above 10 mm, hr coil less than 10 mm, wpi pig iron, pvc resin, hdpe resin

Co-operative

CTN :45474707

23 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.i. item on conversion/supply basis - c.i.pipe with standard thickness & flange as per i.s.i. specification machined from dia 4" to 12"(i) new material supply basis, (ii) on conversion basis, c.i. bend, duck foot bend, cross,tee and other such part all size as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.drum, rod,bush, bari,idler pully, break drum for cane unloader etc as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.coupling from 4"dia to 10"dia plane/flange type(i) new material supply basis, (ii) on conversion basis, c.i. firing frame,door side chamber, bagasse rotary chuts, rotary feeder drum , clit, hanger, beam, gutka, furnace nozzle, clam etc. and other such parts for lipi/taxmaco boiler as per different drg.high chrome grade 25 , casting & machined temp. capacity 15000 c(i) new material supply basis, (ii) on conversion basis, c.i. clamp/ hanger clit small size for lippi boiler no. 3 as per drg. blr-79 high chrome grade 25 , casting & machined temp. capacity 15000 c, c.i scapper mixed with pig iron and having standard hardness dully machined as per drg.no.mh-66 ( r)(i) new material supply basis, (ii) on conversion basis, (iii) grooving of c.i.scrapper as per drg., centrifused casted c.i.coupling for fmg gear of kcp mill od 1000 mm.pcd 815(18 holes)9+9,with machining complete as per drg.no.mh-93, c.i.motor cover for different type motor, mill setting bolt & nut for kcp mill drg.no.mh-106, mill setting bolt & nut for taxmaco mill drg.no.mh-38, c.i.worm and worm wheel for crystilizer as per drg.bh-39 ( r ) machined, c.i.worm and worm wheel for vertical crystilizer no. 2 complete set as per drg. machined, eccentric shaft and eccentric for hopper as per drg.no.bh-60, m.s.shell for under feed roller as per drg.mh-95.length 1525 mm.od 750mm,thickness 18mm, c.i. muff coupling for cane unloader as per drg.no cu-25, c.i.gear for magma mixture as per drg.no bh-137.od 450mm,no.of teeth-51.bore 70mm, width 63mm, c.i.brake drum for s.d.centrifugal machine taxmaco make duly machined(i) as per drg.no. bh 81/1, (ii) as per drg.no bh-81/2, c.i.v-belt pully of cont.centrifugal machine duly machined, c.i.scale seat for juice weighing scale duly machined and drilled as per drg.no.mh-195, id fan pully (as per drawing no. bl-r-128/2024-25), id fan motor pully (as per drawing no. bl-r-129/2024-25), boiler grate bar material-cont iron. (as per sample/drg.), boiler furnace manage gap bar. (ap per sample/drg.), chief engineer

CTN :45328987

15 Jun, 2026 NA

Sealdah - West Bengal

Tender For corrigendum : - repairing of damaged electrical items and supply of different electrical maintenance materials at 44 iron side road rhe. - repair of existing damaged led tube light / led mirror light/ led cove light/ led surface mount+ down lighter light with necessary driver should matching with existing specification (t5 output_ 18w 20w, 240ma)i) driver only, ii) led strip only, supply of 4ft long led smart bright tube light fitting with led tube light .(make: philips-type: bn 021 led40s- 6500 psu gr (4 ft) or equivalent model of crompton/jaquar)., supply of single fancy wall bracket led light fitting (make - philips, model no-31453 or equivalent model of crompton/jaquar) incl. 1nos 9 w led lamp (make:-philips or equivalent model of crompton/jaquar). of warm white colour lamp complete with all accessories, supply of 15 watt led surface mount+ down lighter light fittings including all accessories and mountings complete set as per direction of eic(make- crompton, type-lcdspln-r-15-cdl/ philips/ jaquar), supply of led 7.5 watt mirror light fittings complete with lamp including & all other accessories (make :philips:type jojoba wall light, model no. 34034/14/86 or equivalent model of crompton/jaquar)], fixing of 3 module 2w, 3000k led foot light fittings. incl. s/f 3 module ms flush box in wall as per approval of eic/authority., supply of single led light 12w, 1200 lm, 10,000 life hours, cdl led lamp ( make : philips / crompton / jaquar ), supply of modular soket type 2 module regulator (brand approved by eic), supply of step type electronics fan regulator (brand approved by eic), supply & fixing 1200 mm ceiling fan(max 60w) complete with all accessories, down-rod etc. (except regulator) [make:orient new air plus/crompton/usha striker plus /havells (cat no-fhcss1sbrn48)/ as per approval of eic.], supply of 450 mm sweep cabin fan (make:orient tornado wall ii or equivalent model of cg/havells/other brand as per approval of eic/authority] on wall by s&f rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd., supply of 09 sweep a.c. exaust fan metal body with all parts.make-epc, type-p23009/4(make : havells / orient / epc), supply of 200 mm sweep, modular exhaust fan (max 32w) complete with all accessories, [make:havells ventil/crompton/usha / as per approval of eic.], supply of 10ltr geyser having storage ; capacity: 10 litres; wattage: 2000 watts; pressure: 8 bars ; bee rating: 5 star; waterproof degree : ipx-4 protection for longer product life. adjustable knob for temperature settings between 25 degree c to 75 degree c to get the desired temperature, multi-function safety valve which protects tank from internal and external pressure build up including hot & cold water distribution pipe line. warranty- 2yearsmake:- havells(type- monza)/ venus/ v-guard, supplying of 1.1 kv single core stranded fr 2.5 sqr mm pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) 100 mtr coil, supplying of 240v 6-16a sp mcb of breaking capacity 10ka & c characteristics (make: l&k / legrand / crabtree), supplying of 240v 40a dp mcb isolator(make: l&k / legrand / crabtree), supplying of 240v 63a fp mcb isolator(make: l&k / legrand / crabtree), supplying of 2.5 mfd condenser (tibcon), add. g.s.t.@ 18% (on total from item no 1 to 20) to be calculated by bidder, add. lwc.@ 1% to be calculated (on total from item no 1 to 20 + gst@18%) by bidder

CTN :45455087

20 Jun, 2026 NA

Muzaffarnagar - Uttar Pradesh

Tender For supply of computer table , office side table , chairs , white board , laptop , multi function printer , projector screen , neceeary stationeries , epabx , first add box , seize fire extinguisher , almirah , dining table chairs , side station , bar counter , hostess desk , stroage cabinet , computer pos , dinner plate 11 , dessert plate , b and b plate , tea cup , tea saucer , soup bowl , soup bowl 4.5 , soup spoon chiese , service bowl 1 , service bowl 2 , platter1 port 10 , platter 2 port 12 , pasta plate 11 , cereal bowl , chutney bowl , tea spoon , dessert spoon , dessert fork , soup spoon ,bowl , dessert knife , table spoon , table fork , tea strainer , tea set , water jug , salt and pepper set , tooth pick holder , straw holder , sugar sachet folder , napkin holder , finger bowl large with under liner , entree dish round with lid , oval platter , resered , round tray , rectangular tray , ash tray , tom collins , hi ball , pilsner , decanter small , decanter large , wine glass , table cloth , table napkins , bar tool kit , cocktail shaker , first add kit , iron almirah , internet , white board with marker , overhead projector , desktop , internet access , money currency counter machine , printer scanner , multimedia speaker , first aid box , air conditions , adjustable lights , bar code scanner ,printer , calculator , card swipping machine , carry bag , cashcounting machine , cash drawer , cctv , computer chairs , challen book , clipper hangers , desktop computer , coupons vouchers , credit card , credit notes , currency notes , customer feedback , daily log book , danglers , demo counter , display tool kit , display photographs , display board , dummy product , dummy biling , dummy stock invoice , dustbin , fire alarm , flip chart holder , gift wrapping pper , glow in dark , gondolas , gun tag tagging gun , hanger , hanger stand , housekeeping , labelling macjine , ladder , lcd tv , lead register , shopingcart , locking system , loyalty scheme , mannequins , neck lock for varry bags , offer policy , pallets , paper board , paperpins , peghooks , personal protective , photographs , physical bill copy , posters , projector , publlc address ststem microphone , punching machine , purchase book , safety sing board , security tags and remover , shopping basket , stationary items kit , stock almirah , stock count register , stool molded with steel base , store directory directional signages , uv light fake note detecting machine , vaccuum cleaner , weighing machine , writing board with white npard marke and duster , electronic pay option signage , display photographs of different types of product categories of recent to fit into 1 5 , ups , theft alarm , printer with scanner , 5 port network switch , internet connection , wiiting board with white board marker and duster , external hard disk drive , usb drive , rj45 connecters , web camera , vaccum cleaner , air conditioner , antiverus , printer table , steel cupboard drawe type , electrlcal work includes isi working and fitting , toner cartridges / ink cartridges / consumables for printers (q2) //bid details 2 / 102 (q2)

Central Government/Public Sector

CTN :45431584

09 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, spring plank, pantograph with or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., all plastic items, rubber and wooden , fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. excluding items - railway track. remarks:the quantity estimation is based on visual observation and is indicative only. the lot has been prepared to clear the land before handing over the scrap yard for memu work. 2. loading will be allowed

Central Government/Public Sector

CTN :45403887

25 Jun, 2026 NA

Sealdah - West Bengal

Tender For e-tender for procurement of essential drug items under table-a, for one year from the date of aoc. - aceclofenac tab ip 100mg, albendazole tab. i.p. 400 mg., ambroxol syrup i.p. 30 mg / 5 ml, atorvastatin 40mg tab., drotavarine i.p. 40 mg tab, fluphenazine inj. 25mg, gabapentin tab/cap ip 300 mg, iron & folic acid tabs (wifs-junior). each sugar coated- pink coloured tablet contains: dried ferrous sulphate ip 150mg eq. to elemental iron 45 mg & folic acid ip 0.4 mg, iron & folic acid tabs each sugar coated - permitted edible blue colour tablet contains dried ferous sulphate ip - equivalent to 60 mg (elementary iron) & folic acid ip - 0.5mg (i.e. 500 mcg) as per rule 127 of the drugs and cosmetics rules, 1945, miconazole cream i.p 2%, quinine sulphate tab. i.p. 300 mg, sucralfate oral suspension 1g / 5ml, terbinafine 1% cream, important note: 1. all prospective bidders are requested to quote the rate in boq as per accounting unit & item specification as mentioned in the table-a. wrong quoting of the rate in boq will be dealt with as per penal provisions of the t&c of the tender.2. tendered quantity is just a tentative quantity and should not be treated as final. it may increase or decrease, as per need of the state. keeping this in mind, the supplier is not allowed to seek termination of the rate contract after finishing supply of tendered quantity.3. quality of the product supplied, may be ascertained by testing / physical examination by the experts at any stage of the tender period.4. the prospective bidders of the said tender are requested to make a declaration in affidavit under annexure vi(b) in case of sole manufacturer/importer (i.e. proprietary in nature).5. if the item(s) under sole manufacturer / importer is (are) proprietary in nature, quarterly intimation is solicited from the approved bidders positively regarding the status of their item(s) proprietary in nature, otherwise their item(s) will be blocked in the smis.6. in case of tie bid, decision will be taken by the tia as per g.o. no. 2320-f(y), dated 07.06.2022 issued from finance department audit branch (group t).

Pig Iron Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Co-operative

Central Government/Public Sector

Central Government/Public Sector