Latest pigment Tenders | Government pigment Tenders

Central Government/Public Sector

CTN :45575937

23 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of under coat paint to match colour shade ral 070 80 40 (apricot yellow) paint to spec. is8662/2024, rev.-3 and icf/md/spec-045, issue status 2, rev.03 with amdt. dt. 22/4/2008 or the latest. the pigment content shall be 6% minimum (by mass) as per rdso lr.no. m&c/pcn/i/64/i/vol.ii dated 12/5/2016 as rdso amdt. no.1 packing condition : packed in 20 litres new, sound and returnable ms drums to is 2552/89 ( ra - 2018) with amdt. no.1 gr.b2 or latest. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45576167

30 Jun, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of paint enamel synthetic exterior finishing bus green isc no. 299 as per is: 5/07(reviewed in 2018) to is: 8662/2024 third revision with rdso amndt. no. 1b(rev. 2.0) as an additional requirement along with rdso amndt. no. 1(rev.0) for pigment content as an additional requirement to is:8662/04. with additional requirement of icf/md/spec. 045. issue status 02, rev. 03, packed in 20 ltrs. new and sound non-returnable m.s. drum to is:2552/1989 with amndt. 1 of april 1999, grade b-1. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45576290

24 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For zinc oxide pigment (powder) for paint to is:35/latest in 25 kgs. or 30 kgs. hdpe polythene bags. the date of supply of the material should be within 60 days from the date of manufacture. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45577090

08 Jul, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of enamel synthetic exterior under coating pale cream spec.is:8662/2004 (second rev.) and rdso amendment no.1 (rev. 0) for pigment content as an additional requirement to is 8662/2004 w.e.f 1.8.2016 with additional requirement of icf/md/md/spec.-045, issue status -02, rev- no. 03, dt.14.6.2007 isc:352 with rdso amendment no.1a with fire retardant properties as per rdso spec. m&c/pcn/120-2011(rev.-1) dated feb'2011. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45578569

24 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of enamel, synthetic, exterior, finishing colour shade ral 070 80 40 (apricot yellow) paint to spec. is: 8662/2024 rev.-3 and icf/md/spec-045, issue status 2, rev.03 with amdt. dated 22/4/2008 or the latest. the pigment content shall be 6% minimum (by mass) as per rdso letter no. m&c/pcn/i/64/i/vol.ii dt: 12.05.2016 as rdso amdt.no.1 packing condition: packed in 20 liters new, sound and returnable ms drums to is: 2552/89 (ra 2018) withamdt.no.1. gr.b2 or latest [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45324560

23 Jun, 2026 85.78 Lacs

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of

CTN :45533036

20 Jun, 2026 7.99 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality

State Government

CTN :45535662

14 Jul, 2026 40.00 Lacs

Rewa - Madhya Pradesh

Tender For jail factory raw material supply - plastic cans (thick/thin/narrow-necked), kitchen sink (various sizes), thinner (1-liter pack), super-grade shellac, super-grade sandarac resin, plywood 19mm (48), plywood 12mm (48), plywood 6mm (48), sunmica/laminate (48), fevicol (1/2 kg pack), white/yellow/red earth pigment (bamatti), turpentine oil (1-liter pack), various paints (1-liter pack), iron hinges (various sizes), carpenter's pencil, triangular file 4, triangular file for large saw 8, steel screws (all sizes, pack of 100), foam 4-inch, 32 density (3x6) 100mm, foam 2-inch, 32 density (3x6) 50mm, foam 1-inch, 32 density (3x6) 25mm, rexine (all colors), wood stain - yellow (1-liter pack), babool wood scraps/offcuts, sarai wood scraps/offcuts, revolving chair wheel/caster, solution/adhesive (1-liter pack), sharpening stone (oil stone), cobbler's nails (small/large), emery cloth/sandpaper (all types), white lead/asian putty, insulating oil, basting/welding rod (no. 8, 10), plain iron rod (2, 3 sut/approx. 6mm, 10mm), iron rivets (various sizes), iron strip (1 inch wide, 1 sut/approx. 3mm thick), g.i. sheet 24 gauge, g.i. (galvanized iron) thick/thin wire, carbide, black iron sheet (12 gauge & 14 gauge), yellow wax, abrasive cloth/paper (nos. 60, 80, 120), muslin cloth, panel pins (all sizes), sheet metal box latch/hasp, sheet metal box handle, painting brushes (all sizes), m.s. iron pipes (all sizes), waterproof plywood (6 mm, 84), large metal cutter blade, small metal cutter blade, tacki amber (adhesive), metal/wood primer, iron pipe (1 inch), measuring tape (3 meters), long steel hinge (6 feet), steel pipe inserts/plugs, mosquito mesh/netting, plastic handle, aldrop, runda (hand planer) machine cutter blade, laminated board (18 mm), section (b) weaving industry, fittings, rock salt, dyes/colors (all types, fast/permanent), canvas strap (4 inches), fine belt a-82, power loom wire heald (13 inches), power loom metal reed (no. 36) x 72, fine belt a 102, b-37, b-43, fadi 72 x 20, fine belt a 94 and a 120, grease servo super (in 1 kg pack), mobil oil servo super 15w-40 (in 20-liter pack), section (c) stitching/tailoring industry, white thread terrycot (800 meters), hook/needle plate (throat plate), shuttle (small machine), top rod, feed dog, plate, white transparent buttons (in pack of 1000), bobbin case, tailor's measuring tape, tailor's chalk (pack of 10 pieces), machine oil (in 1-liter pack), hand needle no. 7 (reel), machine needle no. 18, 21, interlock needle, lily (thread/yarn), press buckram, section (d) sizzing/tracing paper industry, white paper (1727) 57 gsm, white paper (1822) 57 gsm, laser paper (1727) 80 gsm brown paper (3646), plastic sheet (110 microns), universal wash (in 5-liter pack), fountain concentrate (in 5-liter pack), offset jobbing black ink (in 1 kg pack), binding cloth, binding thread (6/20), refined wheat flour (maida), arrowroot powder, ivory sheet (2228) 300 gsm (mpr paper), colored card sheet (2228) 210 gsm, copper sulphate (blue vitriol), boda yellow/white (in various weights/ounces), ruled paper (1626) 57 gsm, offset sponge, rin supreme soap (250g pack), twine/sutli, cover paper (2336) 110 gsm, answer booklet ruled paper (1822) 57 gsm, roller cloth (no. 90), roller cloth (no. 160), blanket (2123), colored card sheet (2228) 180 gsm, coated card sheet (2228) 200 gsm, cover paper (2030) 110 gsm, colored paper (1822) 54 gsm, scrap paper (2030), stapler pins (no. 24), one-side coated card sheet (2228) 180 gsm, numbering machine in central jail rewa m.p.

corporations/Associations/Others

CTN :45562274

29 Jun, 2026 5.00 Lacs

Hosur - Tamil Nadu

Tender For providing childrens play equipments for park at w.no. 35, classic homes in hosur city municipal corporation - supplyandfixingofswing 2 -seaterwithrubberseat:a-frame:1 galvanished b class pipetoprail: 2 galvanished c class pipeseats : rubberchain:8mmstainlesssteel chain( grade - 304)paintingwithpucoatingproductarea:10 ft*9 ftplayarea: 15ftx 15ft, supplyandfixingofwaveslide8ft (frp)[component]ladder : galvanished b class pipe sliding chute 9ft bed leg :galvanished c class pipeheight:5ft frp thickness 4mm. (reinforced polymers in 5 layers) 450 csm matt, 600 roving mat,isotolic gel coat with pu pigment.painting with pu coating width: 2ft[required area]productarea:21/2 ft* 12 ft, supply and fixing of duck rider[component]leg :galvanished c classgalvanished b class pipe spring: mild steel spring duck:frp with isotolic gel coat with uvpigment. painting with pu coating [required area]productarea:3ft*3ftplay area:5ft*5ft[measurement] width - 3ft, supplyandfixingofsee-saw4seaterheight:1 ftwidth:5 ftframe : 1 galvanished b class pipeseesawrail :2 galvanished c class pipeseat : frp seat with 450 csm mat 3 layers bonding. isotolic gel coat with uvpigment.painting with pu coating seat size : 15 ft * 14 ft product area : 5ft x 10 ft play area : 8ft * 12 ft , supplying and lling in foundation, basement, etc with lling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard speci cation and as directed by the departmental of cers., supply and fixing of 30w led street light fitting with led (higher end) with 25 mm dia. gi pipe (class b) with 1 no. 25 mm gi bend complete on the existing post/ on wall with pvc unsheathed copper leads with ms clamps and with painting .sd 532, supply and fixing of 6 metre length single bracket pole with base plate(250 x 250 x 6mm) 76.10mm od x 3.65mm thick x 6000mm length in complete including transportation and labour charges as per standard specification

Corporations/Associations/Others

CTN :45532288

30 Jun, 2026 15.30 Lacs

Kanchipuram - Tamil Nadu

Tender For repair and maintenance work of foot path and light arrangements ,eb board, play materials and name board works in rajagopal nagar park at ward no.51 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clause 18.0 page no.105)

Pigment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors