Get complete information related to latest Pile Foundation Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pile Foundation Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pile Foundation Tenders.
Tender For provision of external electric supply for 661 sailors inliving accommodation at visakhapatnam - supply, installation, testing and commissioning of outdoor type step down transformer 1000 kva 11kv/433v dyn11 oil filled (onan) distribution transformer double copper wound with radiator wall with conservator tank & porcelain bushing for ht, lt with off circuit tap changer, marshalling box all as per is 1180 (part-1) : 2014, bee certified, energy efficiency level ii (as per latest ammendment no 4) complete as directed., a) off circuit tap changer (octc), tapping range +5% to -10% in a steps of 2.5% per step (7 positions)b) temp. rise shall be 40/45 deg. c for oil/winding resp. over an ambient of 50deg.c tempc) insulation class: ad) losses ( subject to is 1180 efficiency level 2/ star 2 as per latest amendment 4) max. total loss @ 50% loading: 2620 w and max. total loss at 100% loading: 7000 w.e) % impedance (%z) shall be 5.00% (subject to is tol.)f) rating & diagram (r&d) plate (fitted on transformer)g) oil temp. indicator (oti) with alarm and trip contacth) winding temp. indicator (wti) with alarm and trip contactj) rated temp class of transformer compartment k10 upto 1000kvak) lifting lugs/ hooks for transformer.l) oil filling inlet pipe with plug.m) air release valve and drain out pipe with plug.n) conservator tank with level guage.o) silica gel breatherp) first oil fill up to recommended level by manufacturer with new oil as per is 335.q) cable terminal boxes with bushes on both ht and lt sides.r) hv winding: delta & lv winding: star.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply and fixing main lt panel cpri approved made out of crca sheet 3.15 mm thick outdoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per al bus bar rated with insulators suitable for three phase and four wire lt ac, 50 hz 415 v 2000 a capacity complete with powder coating, necessary internal electric connection as required and provision of the following : (main lt panel)., incoming:air circuit breaker 1600 amps, 50 ka, mdo type, 4 pole, micro processor release, with adjustable type overload protection, short circuit protection, with necessary cts, meters and cable boxes. - 1 no.outgoing:a) mccb 250 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 07 no (bldg vtpn 02 nos, bldg panels 04 nos + spare)b) mccb 140 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (dg amf panel)c) mccb 160 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (ff panel)d) mccb 100 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (apfc panel)e) intelligent panel meter to measure voltage, current, frequency, power factor, kwh etc with all connected cts.f) led indicating lamps with colour red, yellow, blue of 03 sets.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply & fixing of perforated gi cable tray of size 150 mm width x 50mm depth x 1.6mm thickness with perforations not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with gi suspenders including bolts & nuts etc as req
Tender For providing and fixing of open / green gym item in palasgaon village under kuchana housing complex of majri area. - earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil., supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete., providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:1 :3 (1 cement:1 coarse sand (zone-iii) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources), providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of m - 30 grade made of c&d waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge., providing and fixing pommel horse size 2200 x 710 x 610 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing / pole cap made of hdpe/frp material and seat structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing sky walker size 1700 x 710 x 1700 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and foot rest structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing single shoulder press size 1200 x 760 x 1670 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and seat structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing seating standing twister size 1820 x 610 x 1520 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and twister plate structure made of m.s sheet / frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing outdoor traidmill size 1200 x 610 x 1220 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. plate. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bea
Tender For providing tower pilefoundation of loc no 103 of tower type 220kv da+0 in creek area of narmada river & repairs, strengthening & protection to existing tower loc no 101 & 102 for 132kv gnfc - 132kv achhaliya line under bharuch tr division & bharuch tr circle.
Tender For supply of ptz camera , gi pole , pole foundation , ote , ofc 12 core a , 42 inch led tv , nvr 8 channel , rj 45 connector , ups 2 kva with battery , joint closure , hard disk 4 tb , cat-6 cable
Tender For corrigendum : construction of 11 nos. pilefoundation & 13 nos. open foundation towers, dismantling & transportation of existing towers from constructed location and other associated works in five numbers of existing 132 kv and 220 kv transmission lines of bsptcl .
Tender For supply of 6 meters length octagonal pole hot dip galvanised with 130mm bottom a f & 70 mm top across the face made up of ht steel having 3 mm thick or more only will be permitted . the pole has to withstand for maximum wind speed as per is 875(1987). ht steel alongwith base plate of size 200 x 200 x 12 mm of thick having fe 410 grade steel conforming to is 226(1975)/is 2062(2011) with 4 nos of m20x600 long 'j' type en 8 grade foundation bolts along with template and 1 meter long hot dip galvanised double arm standard bracket made up of 40 mm dia gi pipe suitable to mount on pole having top 70 mm across the face. including one number of mcb spn type c series 10amps rating with 20 amps smc connector is fixed on the 5mm thick smc sheet for cable termination . make: phillips, havells, bajaj, utkarsh and surya.
Tender For corrigendum : repair, maintenance of street light, flood light timer panel, high mast light, electric poles, pole painting, pole foundation, lt ug xlpe cables and other connected works at hq jl wing, acharya enclave, harshan enclave i, harshan enclave ii, mohit
Tender For supply of sitc of eletrical equipments and accessories at ssd d d - 3c 185 sqmm xlpe insulated 11 kv armoured cable aluminium conductor , glass fiber filled moulded cable cleats , 3.5 core 500 sq.mm, 240 sqmm 0.5 core xlpe armoured cable multistrand aluminium conductor for 1.1 kv , double compression type cable gland , aluminium lugs 500 sqmm , aluminium lugs 240 sqmm , cable end termination kit suitable for lt , frp ladder type cable tray , hdpe pipe of 90 mm internal diameter , hdpe pipe of 110 mm internal diameter , trench in hard murrum , trench in hard murrum with hammer driller or jcb use , casting of transformer foundation , 500 kva transformer , straight joint for ht cable , 11 kv dp structure , cable end termination for ht outdoor type , cable end termination for ht indoor type , aluminium lugs 185 sqmm , fire bucket , mounting stand for fire bucket , wall hook for fire buckets , rubber hand gloves suitable for working on 11kv to 22 kv supply. , 11 kv ring main unit , construction of plinth for 11kv rmu , lvdb panel , 630a, 4 pole, air break fixed mccb , 400a, 4 pole, air break fixed mccb , 80 to 250a, 4 pole, air break fixed mccb , earthpit for electrical installation up to 440 v , earthpit for electrical installation up to 11 kv , earthpit for electrical installation - independent earthing , hot deep galvanised iron strip for earthing , rubber matting , rcc hume pipe for cable