Latest pin board Tenders | Government pin board Tenders

CTN :45318339

04 Jun, 2026 1.74 Lacs

Jalandhar - Punjab

Tender For supply of wooden table size 8 ft x 3 ft , wooden cubical workstation size 8 ft x 2 ft , wooden cabinet size 2.5 ft x 2.5 ft , writing chair , revolving chair , vertical blinds 6 ft x 3 ft , sun board with printing size 5 ft x 4 ft

CTN :45338776

29 May, 2026 NA

Malda - West Bengal

Tender For supply & installation of 04 seater cubicle work station table size:750w x 600d x 750/1050ht. (in mm), 45 mm thick panel 1050ht.750 x1050 & 600 x1050,45 mm thick panel 1050ht.p/f of panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. top trim is of aluminum section of size 45x12mm and snap fitted on its base of size 45x20mm. the aluminum frame work is supported on lower and upper partition block. bottom block is made up of 9mm prelaminated particle board of desired shade which is pasted on 33x25mm thick particle board baton frame, which is properly screwed to end post and bottom electrical race way. upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade, optionally white board or glazing can be provided instead of pin board. raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. the raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. the modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. table tops to be made up of 25mm thick pre laminated particle board. the tops are supported on partition with the help of cantilevers. all work tops fixed at the standard anthropometric working height of 750mm from the ground level & finished with well filleted edges, thus making those users friendly. a circular hole is provided on every w/top to facilitate the easy connection of cpu & monitor wires & is covered with a modular wire manager made in abs. gable end is made up of 18mm pre-laminated particle board of desired shade and screwed to top with help of brackets. used to support w/tops at the exposed ends giving an openness to all workstations, cubicles etc. the keyboard trays are made out of 18mm thk plpb & mounted under the worktop with sliding channels [ warranty period: 30 months after the date of delivery ] ]

CTN :45301175

02 Jun, 2026 NA

Palamau - Jharkhand

Tender For supply of machine equipments furniture items in nagar panchayat chhattarpur - executive table made of pre-laminated board (minimum 25 mm top, 18 mm sides), size approx. 7 ft 3 ft or larger, with side storage unit (l-type), drawers with lock, modesty panel, edge banded, termite resistant., ergonomic design, cushioned seat (minimum 40 50 mm foam), hydraulic height adjustment (for revolving chairs), strong base with castor wheels, load capacity 100 kg., visitor chair with cushioned seat and back, strong metal/steel frame with powder-coated finish, ergonomic design, and load capacity 100 kg, suitable for office use.seat size approx. 18 20 inch width with proper back support, non-slip legs or base, durable upholstery (fabric/leatherette), with minimum 1-year warranty, engineered wood cabinet, minimum 4 5 shelves, lockable, size approx. 6 ft height 3 ft width, powder-coated/laminated finish., office backdrop panel made of acp with high-quality printed vinyl or uv print finish, mounted on wall with proper framework, suitable for office branding/display.size as per site requirement, with smooth finish, durable material, and provision for logo/text display.(led backlit option preferred, with concealed wiring), designation board made of acrylic sheet (minimum 5 mm thickness) with uv printed or vinyl lettering, mounted on office backdrop with spacers for raised effect.size approx. 18 inch 6 inch (1.5 ft 0.5 ft) or as per designation length, with smooth finish, durable printing, and proper alignment on backdrop., photo frame made of wooden frame with glass/acrylic front, high-resolution printed photograph, wall-mounted with proper hooks.size approx. 12 inch 18 inch, with durable finish and neat border suitable for office display., indoor ornamental plant in decorative pot, suitable for office environment, low maintenance, air-purifying variety (e.g., money plant, snake plant, or similar), with pot size approx. 6 8 inch diameter, placed on desk/table., office pen stand made of metal material, multi-compartment design, durable and suitable for desk use, with neat finish and standard size., intel core i5 (latest generation 13th or above), 8 gb ram, 512gb ssd (expandable), full hd (21.5 or above) led monitor, keyboard & mouse, pre-installed windows 11 pro and ms office 2021 / microsoft 365 (original licensed), suitable for heavy office/multitasking work, with minimum 3-year onsite warranty (preferred brands: hp, dell, lenovo), color ink tank multifunction printer with print, scan and copy functions, automatic duplex printing, minimum print speed 20 ipm (black) and 10 ipm (color), print resolution 600 1200 dpi, suitable for high-volume office use.should have adf (minimum 30 sheets), support a4/legal sizes, wi-fi, lan and usb connectivity, refillable ink tank system with low running cost, supplied with full ink set, installation, and minimum 1-year onsite warranty. (preferred brands: canon, brother, epson, hp), line-interactive ups with minimum 600 1 kva capacity, pure sine wave output, backup time minimum 15 20 minutes for one desktop system, with overload/short circuit protection and audible alarm.should include built-in battery, led indicators, and support for automatic voltage regulation (avr), with minimum 1-year warranty., height adjustable table-top desk with manual/gas spring lift, sturdy frame, suitable for sit-stand office use, modular workstation units made of pre-laminated engineered wood (minimum 18 mm thickness) with edge banding, sturdy metal frame, and cable management provision, suitable for regular office use.each workstation shall have minimum working size approx. 3.5 4 ft width 2 2.5 ft depth per user, with partition panels, smooth finish, complete fitting/fixing, installation, and commissioning., ergonomic office chair with cushioned seat and back (minimum 40 50 mm foam), mid-back design, breathable fabric/mesh upholstery, and strong metal frame with load capacity 100 kg.should have fixed armrests, stable base without w

State Government

CTN :45127236

03 Jun, 2026 40.00 Lacs

Rewa - Madhya Pradesh

Tender For block-b electrical materials supply in central jail rewa m.p.2nd call - 18-watt led bulb, 9-watt led bulb, 40-watt led tube light, 20-watt led tube light, 50-watt led high-mast light, 100-watt led high-mast light, board switch, bed switch, board holder, bulb holder, insulator (60 amperes), tester, pliers, mcb (32 amperes), copper multi-strand wire (1.5 mm), copper multi-strand wire (2.5 mm), aluminum wire (1.5 mm), insulation tape roll, fuse wire (copper), winding copper wire (no. 32, 34, 36 — all gauges), bearings (6000 to 6003), bearings (6201 to 6204), bearings (6401 to 6403), capacitor (3.5 mfd), capacitor (2.5 mfd), capacitor (4 mfd), power combined unit, power socket, power switch, press coil (2000 watts), press coil (1550 watts), iron connector, five-pin socket, three-pin socket, large top plug, varnish, slip no. 1, 2, 3, 4, 5, 6, 7, grease, casing patti (10 ft), press pin, board (8x10), board (4x6), watch battery, remote battery, torch (large, rechargeable), rechargeable bulb, wall plug (gitti), screw, split pin, cooler fan blade no. 12, cooler fan blade no. 18, wall fan oscillating motor, saddle (small), saddle (large), ceiling led light

CTN :45284241

28 May, 2026 NA

Malda - West Bengal

Tender For supply & installation of 04 seater cubicle work station table size:750w x 600d x 750/1050ht. (in mm), 45 mm thick panel 1050ht.750 x1050 & 600 x1050,45 mm thick panel 1050ht.p/f of panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. top trim is of aluminum section of size 45x12mm and snap fitted on its base of size 45x20mm. the aluminum frame work is supported on lower and upper partition block. bottom block is made up of 9mm prelaminated particle board of desired shade which is pasted on 33x25mm thick particle board baton frame, which is properly screwed to end post and bottom electrical race way. upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade, optionally white board or glazing can be provided instead of pin board. raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. the raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. the modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. table tops to be made up of 25mm thick pre laminated particle board. the tops are supported on partition with the help of cantilevers. all work tops fixed at the standard anthropometric working height of 750mm from the ground level & finished with well filleted edges, thus making those users friendly. a circular hole is provided on every w/top to facilitate the easy connection of cpu & monitor wires & is covered with a modular wire manager made in abs. gable end is made up of 18mm pre-laminated particle board of desired shade and screwed to top with help of brackets. used to support w/tops at the exposed ends giving an openness to all workstations, cubicles etc. the keyboard trays are made out of 18mm thk plpb & mounted under the worktop with sliding channels [ warranty period: 30 months after the date of delivery ] ]

CTN :42870822

25 May, 2026 2.59 Crore

Faizabad - Uttar Pradesh

Tender For bid to ras supply of furniture and furnishing c c - cabin table for principal , back storage , high back evolving mesh chair , mid back revolving chair , 3seater sofa , 2 seater sofa , center table in aluminium profile 900x600x450 , workstation single seater , table with three drawer , medium back chair , visitor chair , steel almirah , hod room table with side storage , high back revolvong mesh chair , medium back visitor chair , 3 seater sofa specification , wooden center table , office table , metal rack , conference table v shape 32 seater , executive high back revolving chair , medium back revolving chair , meeting table , reception table , faculty table , aluminium partition cabin 12 x 20 feet , interview table , dual desk 2seater , podium , reading table , reading chair , glass door almirah , book case , library rack main unit , library rack adon unit , librarian table , newspaper stand , periodic display magzine rack , periodic display , drawing table , work bench table , lab tables with drawer and shutter with all provison of electrical socket sink with tap without reagent rack , wall side lab tables with drawer and shutter with all provison of electrical socket without reagent rack wall side lab table , wall side lab tables with drawer and shutter with all provison of electrical socket and sink with tap and reagent rack wall side lab table , island type lab tables with drawer and shutter with all provison of electrical socket and sink with tap with reagent rack island type lab table , metal stool , wall side lab table wall side lab table , computer table , computer chair , main table , acrylic sheet notice board , revolving chair , hostel bed , hostel table , hostel chair , common room chair , canteen table ss 6 seater , table for worden , low back revolving chair , three seater bench , carrom table , common room table , three seater bench with cushion , table tennis table , chess table ) /bid number : gem/2025/b/6909449 * /dated: 21-11-2025 & & / bid document 1 / 61 //bid details 2 / 61

CTN :45098078

28 May, 2026 2.23 Crore

Delhi - Delhi

Tender For corrigendum : supply of senior executive table , side rack , back unit , executive table , commercial board , table , rack , small table , water proof board , water proof commercial board , personal locker , angle rack , high back chair , high chair , mid back chair , l type workstation , two seater superior sofa , three seater superior sofa , centre table , big centre table , peg table , 400 mm cabinetry , reading table , reading chair , book shelf , metal storages , auditorium chairs , discussion table oval shaped , revolving stool , wooden conference table , wooden conference table of 25 persons , wooden conference table of 17 persons , lecture hall desk , compactors single static , compactors 4twin , compactors single last 1 bay push pull type , compactors rail pair 9 ft , vertical blinds

CTN :44961123

28 May, 2026 NA

Sundergarh - Odisha

Tender For corrigendum : procurement of customized furniture for golden jubilee building, nit rourkela - compactor (double moving file cabinet)1 bay double movable, compactor (last moving file cabinet)1 bay single movable last (with lock), compactor (static moving file cabinet)1 bay single static, compactor (double moving file cabinet)2 bay double movable, compactor (last moving file cabinet)2 bay single movable last (with lock), compactor (static moving file cabinet)2 bay single static, compactor (double moving file cabinet)3 bay double movable, compactor (last moving file cabinet)3 bay single movable last (with lock), compactor (static moving file cabinet)3 bay single static, discussion room table (6 seater), discussion room table (4 seater), narrow round pouf, lounge chair, oval pouf, wooden lounge chair, square pouf, curved arc-shaped sofa, round pouf, director ante room coffee table, director ante room corner table, wooden chair, deans table, drawing table, registrar table, computer desk, premium conference table (14 seater), premium conference table (16 seater), conference (19 seater) (u shape), conference (12 seater)(ss 304 gold plated), conference table for board room (12 seater) (straight), conference table for directors meeting room (17 seater) (u shaped), conference table (2 seater) (straight), conference table for board room (29 seater) (u shaped), registrar center table, curved arc shape open shelf library rack, curved display rack low 750 mm, customised conference (straight), customised sofa 2x2, customised sofa 2x4, customised sofa 2x8, customised workstation for 4 users in o shape, double seater sofa, directors chair, directors coffee table, directors sofa, directors visitor chair, display rack 2000mm, display rack 1000 mm, high back officer chair, officer chair visitor, curved arc-shaped sofadouble sided sofa, workstation tableduplex back to back, workstation tableduplex single side, workstation table duplex with visitor, lounge chair with, office back storage set, office back storage, officer table, revolving lounge chair, waiting area center table, round table, lounge chair without arm in ss304 base, round low height table, kids chair, children s activity table, steel almirah with glass, steel almirah with glass and shutters, library rack with wooden cladding (double side), library rack with wooden cladding (single side), library book self, filing cabinet, 2,3,4 locker combine, personal locker with out shutters, magzine display rack with back storage, magzine display rack, office revolving chair, office visitor chair, alumuni meeting room chair high back, alumuni meeting room chair medium back revolving, premium revlving chair, premium visitor chair, chair with desk pad, office visitor chair, library table computer lab (single seater) (media viewing) (12 seater back to back) table with front & side glass screen 400mm height, library table computer lab (single seater) (media viewing) (16 seater back to back) table with front & side glass screen 400mm height, manager table, library table(10 seater) library table, library table (10 seater) library table with front glass screen 300mm height, library table (6 seater) library table with front glass screen 300mm height, library table (8 seater) library table with front glass screen 300mm height, library round table, single seater sofa in curve shape sofa, side table, corner table, two seater office sofa, centre table, corner table, centre table, corner table, board room chair, centre table, corner table, pedestal, recliner with footrest, executive sofa 2 seater with wooden frame, executive sofa 3 seater with wooden frame, single seater sofa, center table for office, customised sofa 2x2, sr. exceutive revolving chair, officer sofa 2 seater, officer sofa 3 seater, standing table, back storage dean, back storage director, back storage registrar, storage almirah wooden with glass, storage small (900x450x750), back storage for officer (1350x450x750), director table teak wo

CTN :45251264

29 May, 2026 NA

Mumbai - Maharashtra

Tender For providing of custom bid for services - renovation of workstation, wooden partition and installation of cabinet with outside lamination and polishing

Central Government And Public Sector

CTN :45225231

27 May, 2026 89.86 Lacs

Ramgarh - Jharkhand

Tender For supply of case,book show,4 door,st4bc100xxx,godrej , chair,conference,mid back,3002ax,godrej , table,main,wooden,1500x750x750mm,godrej , table,eru,godrej,jefferson,rhs , table,main desk,godrej,jefferson,rhs , table,tower unit,godrej,jefferson , table,back unit,godrej,jefferson , cabinet,file,4 drawer,stvfxdm4086,godrej , conf table,8seater,mingle,godrej,modular , sofa,2 seater,godrej,pisa , sofa,3 seater,godrej,pisa , table,center,godrej,pisa , chair,hb,regency pch 7001d,godrej , chair,visitor,std,regency 7003d,godrej , almirah,plain,std,ststw000xxx,godrej , table,office,desk,t 9,godrej , workstation,1500x1500x600mm,penta,godrej

Pin Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector