Get complete information related to latest Pin Socket Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pin Socket Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pin Socket Tenders.
Tender For supply various type construction material at gp. pilandri tal pauni dist bhandara - 80 mm. metal white-(hand broken metal) with royalty, 40 mm metal white- (hand broken metal) with royalty, 40 mm metal black- (crusher broken metal) with royalty, 20 mm metal black- (crusher broken metal) with royalty, 12 mm metal black-(crusher broken metal) with royalty, 6 mm metal black-(crusher broken metal) with royalty, boulders rubbles and masonary stones, sand river (unscreen) with royalty, sand (nallah bed), soft murum with royalty, hard murum with royalty, soil, cement 53 grade opc, cement 53 grade ppc, burnt bricks ( ii class), mild steel bars of various sizes, tmt steel bars of various sizes, oil paint isi mark, plastic emulsion paint, wall paint isi mark, centring tar, torpin oil, bitumen pack tin 60/70 at mumbai, murum carting only, weste material carting, mixter machine per day with desel and driver, water tanker with desel and driver, centring rent for drain work, centring rent for cement road, centring rent for building work, rcc pipe 1000 mm, rcc pipe 800 mm, rcc pipe 600 mm, rcc pipe 450 mm, rcc pipe 300 mm, compaction of earth work in embankment upto layer of 30cm comp machinary charges only, compaction of soft murum/ kankad 2.00 to 7.00 width (200mm loose) with static roller including necessary artificial watering etc complete, transporttion of soft murum on road side etc complete as per analysis, information board 1)size 1.20 x 0.90 , information board 2) size 0.75 x 0.90, transportation of excavated soil from ex-mat. tank to field up to 3km, wooden door frame size 6 * 3.25, cement door frame size 6*3.25, wooden door size 6 * 3.25, plywood door size 6 * 3.25, door kits per door, precost sheet, oil engine, meter stone, ferlong stone, jcb per hours, rollar per day with desel driver, griil work, murga, pavour block(gattu), quota tyles, vetryfied tyles, bt pod, wc pod, nutri trap, ms poor, ac sheet, gi sheet, distemper, birla white, in well boar 4.50 inch, in well boar 6.00 inch, epex ext. primer, epex ext. emulsion, epex interial emulsion, white putti, water tank (syntax), kadappa stone, nahani tap, fly ash brick(cement bricks), gi pipe 15 mm dia., gi pipe 20 mm dia., cpvc pipe 50 mm, cpvc pipe 25 mm, cpvc pipe 15 mm, water level indicator, lighting conductor, type coper patti, gi cd staire, pevor block (ruber quoted), pevor block color quoted, pvc lbow verious size, pvc t verious size, 25 mm pvc pipe, 250mm pvc pipe 6 kg, 250mm pvc pipe 4 kg, 200mm pvc pipe 6 kg, 200mm pvc pipe 4 kg, 110mm pvc pipe 6 kg, 110mm pvc pipe 4 kg, 90mm pvc pipe 6 kg, 90mm pvc pipe 4 kg, 75mm pvc pipe 6 kg, 75mm pvc pipe 4 kg, 63mm pvc pipe 6 kg, 63mm pvc pipe 4 kg, sluice valve 80 mm, sluice valve 125 mm, sluice valve 150 mm, sluice valve 200 mm, sluice valve 100 mm, air valve 50 mm, air valve 80 mm, air valve 50 mm, reflux valve 80 mm, gi pipe 80 mm, pvc special tee,bend,coupler,taispeace,pipe, gi special hang, nutbolt,rubber shocate, tee, bend, solution, 3 seater steel chaire, 3 seater rcc chaire, toilet sheet, pump 3 bhp 200 mm & 120 mm head, pump 5 bhp 200 mm & 120 mm head, gi bend 80 mm, gi coupller 80 mm, control panal box, steel angle, chaniling facing, primer, plywood sheet, ceramic tiles, handwash basin, tap, water meter, waterproof cement
Tender For supplying electrical materials and repair maintenance services for street lights and electrical works at. grampanchayat somatane - electrical material, supplying and erecting modular type switch6a / 10a ., supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded ., providing cement concrete foundation including excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectively and total 9 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia. with 4.5 x4.5 x3.65 mm thickness (5.60 + 2.7 + 2.7 m) length total 11 m long with pole cap, base plate in provided foundation ., supplying and erecting street light bracket made from 25mm. dia b class g.i. pipe, 0.6m. in lengthalong with polecap of 300 mm length and 80 mm dia duly welded with provided leads as per specification, supplying,tpmcb 40a to 63a in provided distribution board, providing pair of duly tested rubber hand gloves as per is:4770 suitable for working upto 22kv supply., supplying and erecting insulated d.p. switch surface type/flush type 32a 240vwith indicator lamp & fuse, supplying h.c. pattern porcelain fuse bridge swith base & hc type fuse links240v 32a, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching on & switching off street light as per daily sunset and sunrise respectively, 1.25 mm crca sheet metal enclosures with 20a., supplying pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper industrial cable ., supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink ., supplying and erectingled street light fitting suitable for 26w to 36w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95,class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium ., supplying & laying pvc armoured cable 4core 6sq mm, supplying & laying pvc armoured cable 4core 10 sq mm, supplying & laying pvc armoured cable 2core 10 sq mm, supplying & laying pvc armoured cable 4core 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting), supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting), supplying, erecting & marking tpmcb 6 a to 32amp ., supplying, erecting & marking fpmcb 40a to 63a ., supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm., supplying & erecting crimping type coper lugs for cable upto 1.5 to 6sq mm., supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials., supplying & erecting mains with2x1.5 sq.mm f.r copperpvc insulated wire laid in provided conduit/trunk
Tender For corrigendum : supply of switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 1 no. on-off switches and 1 no. 3 pinsocket 6a, 250v ac with 2 nos. 1.0 amp. glass fuses with fuse holders. as per item-4. rcf drg no. -cc74247 alt.-g, edml-086, rev-8, table -3. [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : supply of switch plate assembly complete with poly carbonate cover frame and powder coated steel plate or gi plate without powder coating of minimum thickness 1.0 mm with 2 nos. on/off switches and 2 nos. 3 pinsockets 6 amps. 250 volt with 04 nos. 1 amps. glass fuses with holder as per edml - 125, rev. 6, item no. 2 of table no. 2 with rcf drawing no. cc 74254, alt.'c'. (one set consisting of 10 nos. switch plateassembly.) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of lhb eog non-ac lscn coaches with wider window edml-242 corr-1, table-3 [noted: 01 set consist of 1) switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 04 nos. on-off switch and 01 no type-a & c usb mobile charging socket with 02 nos. 1.0 amp glassfuse= 10 nos. 2) switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 04 nos. on-off switch and 01 no type-a & c usb mobile charging socket with 02 nos. 1.0 amp glass fuse= 10 nos & 3) switch plate assembly complete with polycarbonate cover frame and powder coatedsteel plate with 02 nos. on-off switch and 01 no type-a & c usb mobile charging socket and 01 no 3 pinsocket 6a, 250v ac with 04 nos. 1.0 amp glass fuse= 10 nos] hsn code: 85351010 [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of lhb eog non-ac lsldr coaches with wider window edml-242 corr-1, table-4 [noted: 01 set consist of 1) switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 03 nos. on-off switch and 01 no type-a & c usb mobile charging socket with 02 nos. 1.0 amp glass fuse= 04 nos. 2) switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 02 nos. on-off switch and 01 no type-a & c usb mobile charging socket with 02 nos. 1.0 amp glass fuse= 04 nos 3) switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 02 nos. on-off switch and 01 no type-a & c usb mobile charging socket and 01 no 3 pinsocket 6a, 250v ac with 04 nos. 1.0 amp glass fuse= 04 nos & 4) switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 03 nos. on-off switch and 01 no type-a & c usb mobile charging socket with 02 nos. 1.0 amp glass fuse= 04 nos] hsn code: 85351010 [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of lhb eog non-ac lscn coaches without wider window edml-242 corr-1, table-2 [noted: 01 set consist of 1) switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 02 nos. on-off switch and 01 no type-a & c usb mobile charging socket and 01 no 3 pinsocket6a, 250v ac with 04 nos. 1.0 amp glass fuse= 10 nos 2) switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 04 nos. on-off switch and 01 no type-a & c usb mobilecharging socket with 02 nos. 1.0 amp glass fuse= 10 nos & 3) switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 02 nos. on-off switch and 01 no type-a & c usb mobile charging socket with 02 nos. 1.0 amp glass fuse= 10 no] hsn code: 85351010 [ warranty period:30 months after the date of delivery ] ]
Tender For supply of lhb eog non-ac lgs coaches with wider window edml-242 corr-1, table-1 [noted: 01 set consist of 1) switch plate assembly complete with polycarbonate cover frame and powder coated steel platewith 03 nos. on-off switch and 01 no type-a & c usb mobile charging socket with 02 nos. 1.0 amp glass fuse= 10 nos. 2) switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 02 nos. on-off switch and 01 no type-a & c usb mobile charging socket with 02 nos. 1.0 amp glass fuse= 10 nos & 3) switch plate assembly complete with polycarbonate cover frame and powder coatedsteel plate with 02 nos. on-off switch and 01 no type-a & c usb mobile charging socket and 01 no 3 pinsocket 6a, 250v ac with 04 nos. 1.0 amp glass fuse= 10 nos] hsn code: 85351010 ]
Tender For special repair to dbs sub main wiring and miscellaneous items at mh and central institute at old amritsar cantt - taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed., material and labour for point wiring in existing conduit for following point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core frls pvc insulated unsheathed and multi stranded copper conductor cable 1100 volt ( isi marked ) drawn through and existing pvc concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core frls pvc insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar (1:3) complete all as specified and as directed. note : 1 switch, socket, regulator, bell, ceiling rose, regulator, lamp holder will be measured and paid separately.a) for one light /fan/ buzzer point controlled by one 5 amp switch one way, b). for one three pinsocket outlet 5 amps independent board., c) for one three pin 5 amps socket outlet on the same board with other switch, d) for one light point controlled by two way switch, all a per item no 2 here-in-above but with 2.5 sq mm size cable multi stranded frls copper wire unsheathed for one 3 pinsocket outlet 15 amps on independent board including continuous earth wire of pvc insulated 2.5 sq mm copper multi stranded conductor connecting to common earth dolly complete all as specified and directed., material and labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core frls pvc insulated unsheathed and multi stranded copper conductor cable 1100 volt ( isi marked ) drawn and including surface pvc conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core frls pvc insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc by using cement mortar (1:3) complete all as specified and as directed. note : 1. switche, socket, regulator, ceiling rose, bell, lamp holder will be measured and paid separatelya) for one light /fan/ buzzer point controlled by one 5 amp switch one way, b). for one three pinsocket outlet 5 amps independent board, c) for one three pin 5 amps socket outlet on the same board with other switches, d) for one light point controlled by two way switch, all a per item no 7 here-in-above but with 2.5 sq mm size cable multi stranded frls copper wire unsheathed for one 3 pinsocket outlet 15 amps on independent board including continuous earth wire of pvc insulated 2.5 sq mm copper solid conductor connecting to common earth dolly complete all as sp