Latest pinch valve sleeve Tenders | Government pinch valve sleeve Tenders

Corporations And Associations And Others

CTN :41591919

24 Sep, 2025 NA

Babina - Uttar Pradesh

Tender For operation and maintenance of electro mechanical equipments of existing matatila intakewell 45 mld and 110 mld wtp at babina under augmentation and strengthening scheme distt jhansi - routine, periodically and breakdown maintinance of all equipments, associated accessories installed at various units at matatila head works including supply,opening and refixing, transportation , loading, unloading , t&p etc., matatila headworks, routine maintinance and servicing of 320 kva d g set including all necessary spares, oil, filters, diode and lubricant as per norms, repairing and overhauling of 650 lps discharge kirlosker make pumps with following works. model mf 40-45, dismantling, carting and re-installation of pump set including testing on load at site with all labour and t&p, supply and fixing of new ball bearing-6415 and oil seal., supply and fixing of new thrust bearing-51320m, fabrication, supply and fixing of fully balanced new pump shaft made of ss 410 as per sample., reconditioning of pump shaft with rematling, machining and balancing complete in all respect., reconditioning of pump impeller with rematling, machining and balancing complete in all respect., supply and fixing of new impeller for pump as per sample and zise, supply and fixing of new shaft sleeve, chuck nut made of ss 410 as per sample., supply and filling of lubricating oil in every 6 months, supply and fixing of new fastners, supply and filling of glande packing as per size and sample., supply and fixing of new glande plate with stud and nut., repairing & maintenance of kirloskar make induction motor with following works, dismantling, carting and re-installation of motor including testing on load at site with all labour and t&p, rewinding of 75 kw, 736 rpm, 3 phase induction motor with f-class insulated copper wire, nomax paper, sleeves, varnishing etc. complete with all material and t&p., rewinding of 55 kw, 736 rpm, 3 phase induction motor with f-class insulated copper wire, nomax paper, sleeves, varnishing etc. complete with all material and t&p., supply and fixing of new ball bearing-nu318c3, supply and fixing of new ball bearing-6318c3, fabrication, supply and fixing of new rotar shaft as per sample and material., reconditioning of rotar shaft with rematling, machining and balancing complete in all respect., reconditioning of bearing housing with rematling, machining and balancing complete in all respect., routine greasing of induction motor bearings with high temprature jelly grease in every 30 days intervals, supply and fixing of new fastners, supply and fitting of motor connection plate with suitable size of lugs as per sample etc. complete., repairing and maintenance of 600mm size sluice valve with following works, dismantling, carting and re-installation of sluice valve with all labour and t&p, supply and fixing of spendle for sluice valve made of ss 304 as per size and sample, supply and fixing of bush for sluice valve made of gun metal as per size and sample, supply and fixing of disc and body sheet for sluice valve made of gun metal complete with all maching and finishing, supply and fixing of glande plate with studs 600mm size sluice valve as per sample, supply and filling of glande packing as per size and sample, routine servicing of ht panel, 45 mld wtp, repairing and maintenance of 300mm dia size sluice valve at desluding with following works :-, repairing of desludging valve 300 mm dia spendle brass & gun metal, tefloan clf wheel, repairing and overhauling of sluice gate 500x500 mm size at backwash outlet with following works :-, dismentaling, carting, refitting and testing with all labour and t&p required at site, fabrication, supply and fixing of new threaded spindle shaft made of ss:316 as per size and sample, fabrication, supply and fixing of new bush made of gun metal and wage piece as per size and sample, fabrication, supply and fixing of new fix and moving sheet made of gun metal as per size and sample

Central Government/Public Sector

CTN :41644019

23 Sep, 2025 NA

Mandal - Gujarat

Tender For spares for sandvik make cone crusher > - liner pinion shaft arm, liner pinion narrow arm, wearing plate, wearing plate, wearing plate, wearing plate, wearing plate, wearing plate, wearing plate, arm shield, min shaft sleeve, mantle a m1, head nut w/burning ring, burning ring, spider cap, spider bushing, oil seal ring, concave ring, air filter p.1010r1/4", filter hc 69, filter catridge hc 2, air filter purolator, bushing bottom shell, eccentric bushing 32+36+40+44, eccentric wearing plate, hydroset cylinder bushing, piston wearing plate, step washer, oil seal ring, main shaft step, head nut inner, dust seal ring, disc spring 90 x 46 x 5, mechanical rubbing seal, lubrication pump assembly, rubber compression mounting, concave f, concave ec, mantle b, filter ring mf, eccentric bushing 24+28+32, filter catridge, filter catridge, support ring, retaining ring, seal ring inner, locating bar, shim t=0.07, pin prymn 16 x 45, gasket, gasket t=0.5, gasket t=0.8, gasket t=0.5, gasket t=0.8, gasket t=1.5, valve 607.3, valve ha we mve 6f, valve dn 32 0.7 mpa, pump hpi p3-ban-1003, pump l095-02v, feed hopper cone- lh, feed hopper cone- rh, dowel pin, bearing, bearing, rubber compression mounting, screw m6s12 x 25, washer brb 13 x 24, screw m 12x45, lock nut m12, pump p3-aan-0,75-fl-20-b01, charge equipment cgh-300, feed hopper, screw m6s 20x90 8.8, washer brb 21x36, screw m6s 20x60 8.8, washer tbrb 21x36, steel pipe din 2391/c-st 35,4 10x1,5, hose sae 31,5/0,6 l=210, screw m6s 30x280 8.8 iso 4014, washer 80x30x85, washer 80x30x140, shim t=1, shim t=3, shim t=5, shim t=10, screw m6s 30x360 8.8, lock nut m30 8 fzb din 985, sleeve, washer, screws m6s 42x220 8.8, nut m6m m42 8 fzb iso 4032, screw m6s 42x100, screw m6s 16x55, retaining ring sga 100 ss1581, scraper, retainer, screw m6s 16x65 8.8 iso 4014, dust collar, screws m6s 16x65, washer brb 17x30, gasket, ring, screw mc6s 10x40 8.8 fzb, ring, screws m6s 12x40 10.9 iso4017, washer brb 13x24 hb200 iso 7089, key r, gear and pinion set, screw mc6s 12x70 12.9, screw mc6s 12x50 12.9, washer din 137 b 13x24, pin cp 25m6x60 sms 2374, hydroset cylinder, o-ring 453x5.7, o-ring 419.3x5.7, piston, chevron packing, hydroset cylinder cover, screw m6s 24x90, screw m6s 24x140, washer brb 25x45, air bleeder valve, plug, o-ring 44,2x3, screws m6s 8x25 8.8, hydraulic hose 2 , adapter r2 xr2 , tredo nr.20 3/4 , sealingring tredo nr 28, accumulator uncharched (pressure 2.0 bar), accumulator charching pressure 5,0 mpa without asr/ with asr plus, o-ring 84,1x5,7, o-ring 99,1x5,7, spacer inner, spacer outer, bearing cover inner, bearing cover outer, pinion shaft, key 22x14x95 sms2307, 3_retaining rings sga 85, opds complete unit, thermostat, helifloat level guard, pressure drop indicator pis 3097/2 2 bar, cooler complete, coupling half d25 05-32-116, coupling half d38 05-32-540, gear ring 05-32-120, pump unit hpi 1003 8,6 l/min, pump unit rb6 80 l/m 400vy50, temp.indicator, pressure indicator, pressure gauge 100m20-2 0-6 mpa/psi, pressure drop indicator pis 3097/2 2 bar, filter base pi 2205-56, filter head pi2728-47 r1 1/2, dirt trap sw/o 1 1/2-0,6mm, level indicator l=508mm, level indicator l=254mm m 12, air- oil cooler with motor, radiator, spider cap "o" ring, tredo seal, "o"-ring, main shaft sleeve (new type), pressure drop indicator pis 3097/2 2 bar, pinion shaft repair kit, filter insert 2pcs, main shaft cover ch440/cs440, screw mf6s 10.9 fzb m20x40, wt7000 crusher rubber liner, hx900 crusher metal liner, 300x300x30, hx900 crusher metal liner, 300x300x40, hx900 crusher metal liner, 300x300x50, pulley 375 mgt 125 10 x spc, bushing mgt nr 125 100, key r 28 x 16 x 110sms 2307, spacer ring d115/100.5 x 58, washer 2142-50 d 120/18x15, washer brb 17x30 hb200 iso 7089, screw m6s m16x35 8.8 fzb iso 4017, spacer, spacer, o ring 34.2 x 3, sealing ring, 1.5" x 6 mtrs hydrulic hose, 3/4" x 8 mtrs hydrulic hose, pinion shaft housing assembly, pinion shaft housing, elbowa4 zn dn20, adapter 3/4", magnetic plug 0606-12, scre

Private Sector

CTN :41648542

13 Sep, 2025 NA

Jhajjar - Haryana

Tender For supply of m3249356000 - kirlosker - shs 65 - 32 n - assembly , m3249346000 - kirlosker - shs 50 - 26 n - comp assbly , m3249346007 - shs50 - 26 n - impeller , m3249346017 - shs50 - 26 n - thrust bearing carrier , m3249346023 - shs50 - 26 n - thrust bearing adapter , m3249346027 - shs50 - 26 n -shaft sleeve pump side , m3249346037 - shs50 - 26 n - bearing bush , m3249346055 - shs50 - 26 n - oil seal , m3249346073 - shs50 - 26 n - sealing nut , m3249346108 - shs50 - 26 n - strainr , m3249356070 - kirlosker - shs65 - 32 - coupling pins - ring , m3249356003 - shs65 - 32 - encl - impeller , m3249356001 - shs65 - 32 - thrust brg adapter , m3249356002 - shs65 - 32 - casing ring , m3249356007 - shs65 - 32 - coupling - motor side , m3249356008 - shs65 - 32 - imp - shaft sleeve , m3249356038 - shs65 - 32 - pump shaft , m3249356068 - shs65 - 32 - brg - bush , m3249356071 - shs65 - 32 -helicoil lock insert , m3249356101 - shs 65 - 32 n - fastner set , m3249346045 - kirlosker - shs50 - 26 n - coupling bushes

State Government

CTN :41441659

08 Sep, 2025 25.59 Lacs

Sarni - Madhya Pradesh

Tender For procurement of spares for sam turbo make charge pump model no. arn 100/400 installed in ash handling system of unit no. 10 and 11 of stps, sarni. - spares for sam turbo make charge pump model no. arn 100/400 installed in ash handling system of unit no. 10 & 11 of stps, sarni., bearing cover (outer) part no. 5, bearing cover (inner) part no.6, grease retainer part no.7, gland housing part no. 9, split gland part no. 10, shaft sleeve part no. 12, lantern ring part no. 13, thrower part no.14, outer casing (s. side & b. side) part no.15, casing cover plate with insert part no.16, shaft sleeve part no. 16i, inner casing part no. 17, impeller part no.18, wear plate (s. side) with insert part no.19, suction cover part no.21, grease nipple part no. 26, bearing housing part no. 3, key (sleeve) part no. 31, key (coupling) part no.32, dome nut set, stud (brg. housing adj) part no. 42, hexnut (bearing hsg adj) part no.43, washer (bearing hsg adj) part no.44, lock nut part no. 47, lock washer part no. 48, gland packing part no. 56, flange (suc. cover) part no.70, delivery adopter part no. 23

State Government

CTN :41321156

11 Sep, 2025 62.48 Lacs

Birsinghpur - Madhya Pradesh

Tender For corrigendum : procurement of split bearing equivalent to bearing no. 23164 cck w33 along with sleeve and plummer block no. sd 3164 for apron feeder installed at wagon tippler system sgtps mppgcl birsinghpur.

Central Government/Public Sector

CTN :41666743

29 Sep, 2025 NA

Noida - Uttar Pradesh

Tender For procurement of acv auxiliary ard-25 spares - equipment: ac system, make / model:- sutrak carrier / tm 31 hd, primary filter- metal bowl, control cable series 40 (port) 28.0mtr, 4280 mm propeller pitch hose assembly 6. fittings @, 6800 mm propeller pitch hose assembly 5, fuel shut-off cable 24 mtrs, control cable series 40 (stbd) 24.5 mtr, hydraulic fluid low with plug and socket (electrotec), level sensor nmea 2000 3281-0321mm, out board strip 1, flexible exhaust link, standard closed segment, fwd landing skid rubber mount, filter drier, equipment: cpp system, make / model:- ghl uk, st/st rod end rh male m16 gar hw16rr, balanced steering cylinder kit 7065, 3010 mm propeller pitch hose assembly 4, 3220 mm propeller pitch hose assembly 1, long arm riveting plier, line mounted relief valve-rv10 26c3b n 15, taperlock bush aft lift fan (55mm dia) 3525-55, propeller layshaft bearing sleeve nut and tab washer, plumber block lip seal, key 18x10, key 20x12, key 18x11, transmission pulley, 6850 mm propeller pitch hose assembly 9, 4550 mm propeller pitch hose assembly 3, 1570 mm hose assembly 1. fittings @ 90 degree, 1520 mm hose assembly 3. fittings @ 110 degree, 2270 mm propeller pitch hose assembly 2, 1170 mm steering hose assembly 6, 1570 mm steering hose assembly 7, sleeve (h2313 ), eriks tpe r seal (85x120x12) 316 st/st, lock washer(mb13), 22313ek skf bearing, dowty seal 1/2" st/st, equipment:- deck / hull / skirt, sikaflex gun skeleton m301-075, rivet alum 4.8 x 19 mm, pop rivet alum 3.2 x 9.7mm, pop rivet 4.8 x 10mm/ 5 mm big head rivet/ rivets pop 4.8mm (ad66sb ), screw csk posi a2, nut/ nylock nut m6 a2/ m6 nut nylone, washer m6 penny a2/ m6 penny washer, standard craft tool kit, hull emergency repair kit contains: 1xalum sheet 2mm, standard open segments, skirt emergency repair kit, 4130 mm skirt shift assembly 4. bulkhead ram.stbd (h0021807), inboard 4mm cheveron strap, hose assly 3/8"(360 mm skirt shift hose), hose assly 3/8"(370 mm skirt shift hose), metal oval hatch, rapid link 14mm large mouth, hose assly 3/8" (240 mm skirt shift hose assly 7 valve-valve (h0021810), hydraulic cyclinder seal kit skirt system, d shackle 20mm ed621120, strop matrix inboard 5+f68mm (red), strop matrix inboard 4mm (red), round inspection hatch/ plastic round hatch, strop matrix outboard 4mm (black), rope strop 7/8 870mm, cold skirt bonding agent, strip shackle 8mm, d shackle 8mm, nut cap nylon 1/2" 05500 13cn, bridge plate, strop matrix outboard 5mm (black), vetus ufo stainless deck ventilator, skirt shift matrix assembaly, outer loop, inner loop, rivet alum pop, washer m8, m10 washer form b, rudder, elevator blade, 2830 mm skirt hose assembly 1. bulkhead - ram. port(h0021804), starboard inboard rudder, tie rod long, tie rod feedback, tie rod short, temperature switch, rod end m 12 (sme 45.12), rod end m8, inboard 5mm chevron strop, hose clamp, 8mm key pin shackle, 8mm bow shackle, equipment: lift fan, make / model :- ghl uk, shaft lift fan, fwd lift fan bearing, taper lock bush3020x50, washer spring m12, screw m12x30, taper lock bush 75 mm bore, bolt m8 x 25 hex hd a4, drive belt 14mgt-1610, aft lift fan bearing, lift fan shaft seals - aft, equipment:- steering, make / model:- accu steer hm-260, emergency steering hydropack, equipment:- electrical, make / model:- accu steer hm-260, strip led, orange beacon, light stern with assy/3541002 24v, light starboard side 24v 3541002(green), spare bulb, bulb (flap switch)en507026, spare bulb 02-90400006, essential supply isolator 24 v dc coil albright sw80-1907, canbus cable can-201

Central Government/Public Sector

CTN :41613074

22 Sep, 2025 NA

Noida - Uttar Pradesh

Tender For procurement of koel da rkit 26 and ard 25 - cgsd (mbi), air starter, da sea water pump / assembly of raw water pump, automatic voltage regulator,, dv electronic governor with over speed protection, set of joints, starting air pressure sensor, hp pipe assembly, speed control unit, temp sensor with inbuild transmitter (type-mbt5560,range 0-150d, outpu, limit switch, turbo oil drain pipe, double gear assembly, 0-2.5 bar danfoss make pressure transmitter for marine, pf33 individual pump, fuel pipe (from tank to feed pump tee) (marine-abs approved), set of o ring, exhaust temprature sensor with 2pin connector, fuel leakage switch, pump to leak off (marine abs approved), leakoff pipe (uniflex), piston assembly, fuel pipe (feed pump tee to filter in marine - abs approved), turning gear engaged limit switch, fuel pipe (from fuel filter to fip) (marine abs approved), centrifugal oil cleaner (band design), assly. rocker lever, oil filter element, k-coolant (26 lit can), small end bush (finished), belt v section (bx 58-pitchl ength 1520), hose reducer elbo, set of copper washers, fuel pipe (tee to pump inlet gear end) (marine abs approved), fuel pipe tee to feed pump gear end (marine abs approved), leak off pipe (from hp pipe to collector)marine _x0013_ abs approved, fuel pipe (tee to feed pump) (marine abs approved), belt for sea water pump drive, water level switch, thermostat element, hose for turbo compressor out, breather pipe, breather hose for marine, elbow connection, cly.head steel gasket 1.2 mm, bend 90 for feed pump out, top piston ring, exhaust valve, leakoff pipe for hp jacketed pipe (lh), drain cock, hose (dia 54) (bet.2 pipes), oil control ring, fuel pipe (tee to pump in), nozzle body (for oil spray nozzle), second ring piston, inlet valve, bolt (bearing cap), make up pipe, fuse terminal block 6a with 2a fuse link, exhaust valve seat insert, connecting rod bolt, rc joint, m.b.cross bolt (short), clamp(for fuel pipe), joint for governor mounting plate, special nut for exhaust manifold, valve seal, counter shunk head screw (for dv injector leakoff), valve guides, exhaust manifold stud, grommet: 22 dia ferrule, rubber bush (bottom), joint (bet.exh.manifold and expa. bellow), s.s.nut, sealing cap (for dia 25), valve collet, sealing cap (40 din 443)8, o ring: drain plug, grommet: 12 dia ferrule, stud-m10x1.5x25-8.8, set screw m8x1.25x25...8.8, washer copper, cup for valve springs, gasket (lub oil header), washer copper (18x22), plain machined washer - m6, service kit for heat exchanger, fuel feed pump, service kit for centrifugal filter, k cool super plus 50-50 premix 26 liter can, k-cool super plus, bearing, bearing, k sealent (80 ml), flat seal for oil seal housing, oil seal for drive end, conical copper washer, spring, cup for pr tube, flexible bellow, sea water outlet pipe from cac, joint for t connection, joint for sea water pump, joint for sea water piping, pipe for he raw water out, roller tappet assly, rubber sleeve, set bolt-m14x2x60-8.8, dowel pin, k cool plus 26 ltrs can, clamp (2 pipe), crank pulley, inlet valve seat semi-finish, exhaust valve seat semi- finish, cup washer (for nozzle clamp), valve guide, oil seal pulley end, timing pointer (for pulley), air shut off valve, set of main bearings, set of thrust washer, set of gasket for heat exchanger ts6m, oil pipe ( crankcase to pump), hose for air starter, sub assembly of bearing housing, joint cooler cover(rh)from fwe, k-coolant (26 ltrs can), copper washer (18x22), k-sealant, wire braided pipe from jacketed leakoff to fuel collector, temperature guage (0-120 deg), rubber bush (top), pressure guage (0-4 bar), pipe(sea water pump outlet to check valve), o-ring for drain plug, npt plug with zinc bar with he, k sealant 80 ml, drain cock, stud, set screw -m8x1.25x25-8.8, hose clip, copper washer, anti vibration mount - cori, anabond 666t max 25g, hose t bolt, hose clamp, rotary drain pump, k sealant (80 ml), automatic voltage regulator, worm drive hose clip (70mm), se

Central Government/Public Sector

CTN :41626113

08 Sep, 2025 NA

Bilaspur - Chhattisgarh

Tender For supply of 20 adapter sleeve, h317 , 30 bearing, roller, spherical, 23030-cckw33 , adapter sleeve, h3030-h

Central Government/Public Sector

CTN :41657176

11 Sep, 2025 NA

Tiruvallur - Tamil Nadu

Tender For tender for supply of spares for waste recirculation pumps d d - cpp 1 100x80-315rl impeller , cpp 1 100x80-315rl shaft , cpp 1 100x80-315rl casing , cpp 1 100x80-315rl stuffing box , cpp 1 100x80-315rl adapter , cpp 1 100x80-315rl oil seal outboard , cpp 1 100x80-315rl oil seal inboard , cpp 1 100x80-315rl ring for impeller , cpp 1 100x80-315rl bolts for gland , cpp 1 100x80-315rl jackbolt for impeller , cpp 1 100x80-315rl locknut for jackbolt , cpp 1 100x80-315rl o-ring , cpp 1 100x80-315rl pin for shaft sleeve , cpp 1 100x80-315rl pump assembly , cpp1-100x80-400rl impeller , cpp1-100x80-400rl casing , cpp1-100x80-400rl stuffing box , cpp1-100x80-400rl gland plate , cpp1-100x80-400rl shaft , cpp1-100x80-400rl shaft sleeve , cpp1-100x80-400rl deflector , cpp1-100x80-400rl adapter , cpp1-100x80-400rl bearing bracket , cpp1-100x80-400rl bearing housing , cpp1-100x80-400rl bearing cover-nde , cpp1-100x80-400rl lock nut & washer , cpp1-100x80-400rl pedestal , cpp1-100x80-400rl driving key , cpp1-100x80-400rl bearing cover-de , cpp1-100x80-400rl pin for shaft sleeve , cpp1-100x80-400rl flushing tube , cpp1-100x80-400rl pump assembly

Central Government/Public Sector

CTN :41650912

09 Sep, 2025 NA

Vellore - Tamil Nadu

Tender For supply of sleeve type bearing drg no3-52-326-00144 to spec astm b584, qty 60 nos

Pinch Valve Sleeve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors