Latest pipe plug Tenders | Government pipe plug Tenders

Central Government/Public Sector

CTN :44800570

01 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of hex nipple 15 mm as per is:1239 (part-2) -2011 table-28 threads iso7-1, material aisi304 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44802012

18 Apr, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of screw hex m12x20 (hw-174.283) -- fully m/cd item as per drg. 41337201002 rev. a with matl. aa10725 , nipple (hw-174.284) -- fully m/cd item as per drg. 41337201004 rev. 05 with matl. hw10798 rev. c , clamp (hw-263.105) -- fully m/cd item as per drg. 41337201003 rev. 03 with matl. hw10787 rev. b

CTN :44800930

24 Apr, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of set of items for pressurized flushing system consist of two items, item no 1 :- y strainer as per rcf drg.no. lw63100 item no.-04 , item no :2 :- hex nipple 3/4 inch aisi 304, for lhb coach maintenance. [ warranty period: 30 months after the date of delivery ]

CTN :44801202

20 Apr, 2026 NA

Kanchrapara - West Bengal

Tender For supply of set of spare parts for alstom/ bombardier make emu/memu motor coach wheel sets as furnished below. one set consist of 08 items. (1) hex socket head cap screw m8x20 iso 47 - 3egh00001- 5029 - 12 nos; (2) locking screw m8x20 w 158.12-100-geomet - 100124241 - 32 nos; (3) hex socket head cap screw m8x20 din 79 - gmn315817p1209 - 24 nos; (4) hex socket set m8x8-45ha2c - 3egh489012-4948 - 02nos; (5) plug a m8 hzn402227- pe, hart, yellow - hzn451311p0012 - 08 nos; (6) plug d=14,d1-7,2:h1-6,0-polythylene ld -3ejs200025p0002 - 04 nos; (7) lubricating nipple a m10x 1din 3404 ms -ac400553p0006 - 04 nos; (8) locking screw m12 x 50w15.12-100-geomet - 100124264 - 12 nos. [ warranty period: 30 months after the date of delivery ]

CTN :44610154

15 Apr, 2026 NA

Nagpur - Maharashtra

Tender For corrigendum : supply of bearing nuts springs bolts nylon rods d d - compression spring 1.4 x 10 x 40 , compression spring 5 x 27 x 42, 5 turn , compression spring 7 x 42 x 85, 6 turn , compression spring 8 x 36 x 7 x 65 , compression spring flat 48 x 4.5 x 40 , cotter pin 3 x 25 mm , double row ball bearing 3210 zz , grease nipple m6 x 1 mm pitch , hex nut and bolt 1 slash 2 inch x 2 inch full thread , hex nut 1 1 slash 2 inch bsw 6 tip , hex nut 2 inch bsw 4, 5 tip , hex nut 3 slash 4 inch unc , ht hex nut and bolt m16 l 5 inch full thread , internal circlip din 472 95mm , latch spring 2 x 15 x 36 x100 deg , latch spring 2.5 x 20 x 55 x100 deg. , lifting dog compressor spring , lock washer mb10 , locknut 1 1 slash 4 inch , m12 x 1.75 castle nut slotted din 935 , m18 nord lock washer bn 65212 , nylon hex self lock nut bsw 11 tpi rht , nylon hex self lock nut 1 inch bsw 8 tpi rht , nylon rod dia 1 3 slash 4 inch , nylon rod dia 3 inch , nylon rod dia-2 1 slash 4 inch , o-ring 35 mm x 2.8 mm nbr , o-ring 70 mm x 6 mm nbr , plain pin 1 slash 2 inch x 2 - 1 slash 8 inch , set screw 3 slash 4 inch unf x 3 slash 4 inch nylon , single thrust ball bearing 51113 , slotted pin 10 x 28 b iso 8752 , slotted pin 10 x 32 b iso 8752 , slotted pin 10 x 45 b iso 8752 , slotted pin 12 x 55 b iso 8752 , slotted pin 12 x 70 b iso 8752 , slotted pin m6 x 26 mm , spring pin m6 x 45 mm , steel ball polished dia. 7 slash 8 inch slash 22 mm , stud with nut 1 slash 2 inch x 10 inch half thread , thrust ball bearing 51203 , thrust ball bearing 51305 , thrust bearing nta-815 , thrust roller bearing 81210 tn , water swivel packing set 25k , ws hexagonal nipple 1 5 slash 8 inch to 1 7 slash 8 inch , ws spacer od 62.8 x id 51.5 x 1.5 thk ) /bid number : gem/2026/b/7379414 * /dated: 24-03-2026 & & / bid document 1 / 32

Central Government/Public Sector

CTN :44767724

21 Apr, 2026 2.69 Crore

Korba - Chhattisgarh

Tender For supply of spares of flowmore make pump of model f5975ds c c > f> f - wearing ring casing, part no. - f597516 , pump shaft 40-c8, part no. - f59751 , key pump half coup., part no. - f59752 , oil seal for brg. cover at d.e., part no. - f59753 , hx hd cap screw, part no. - f59754 , bearing housing d.e., part no. - f59757 , bearing cover d.e., part no. - f59755 , stuffing box cover d.e. and n.d.e., part no. - f59759 , water seal tube, part no. - f597511 , clinch fitiing, part no. - f597513 , key for impeller 1st stage , part no. - f597514 , inter stage bush, part no. - f597517 , key for ipeller 2nd stage, part no. - f597520 , shaft sleeve, part no. - f597522 , split gland assy., part no. - f597527 , water thrower, part no. - f597529 , oil seal for brg. hsg., part no. - f597530 , grease nipple bearing housing, part no. - f597531 , pipe plug for vib and temp at brg. h, part no. - f597532 , bearing housing n.d.e., part no. - f597533 , bearing cover n.d.e., part no. - f597535 , lock nut for brg., part no. - f597536 , lock washer for brg, part no. - f597537 , grease relief fitting for brg hsg, part no. - f597538 , shaft collar, part no. - f597539 , sleeve nut n.d.e., part no. - f597540 , pipe nipple gland drain, part no. - f597541 , lower half casing, part no. - f597543 , u bend for casing, part no. - f597545 , sleeve nut d.e., part no. - f597550 , upper half casing, part no. - f597512 , clinch fitting, part no. - f597559 , eye bolt, part no. - f597556 , fourway adoptor, part no. - f597560 , impeller, 1st stage, part no. - f597515 , inter stage sleeve, part no. - f597519 , impeller 2nd stage, part no. - f597521 , o-ringshaft to shaft sleeve, part no. - f597526 , pipe plug for casing drain, part no. - f597554 , pipe plug gauge and air vent, part no. - f597555 , priming plug, part no. - f597557 , spr dgwel sleeve, part no. - f597553 , stuffing box bush, part no. - f597523 , water seal ring, part no. - f597525 , rotating assly, part no. - flrauf5975ds //bid details 2 / 48

Central Government/Public Sector

CTN :44792749

14 Apr, 2026 NA

Pune - Maharashtra

Tender For pipe plug for sand trap assembly of 3-phase locos as per drawing no 4tacg9ua-2, rev-1. one sample to be got approved before bulk supply. [ warranty period: 30 months after the dateof delivery ]

State Government

CTN :44060664

21 Apr, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of various fittings for gtps : : -dropped forged carbon steel 90 degree female equal elbow, nb size-50 mm having threaded end., dropped forged carbon steel 90 degree female equal elbow, nb size-40 mm having threaded end., dropped forged carbon steel 90 degree female equal elbow, nb size-32 mm having threaded end., dropped forged carbon steel 90 degree female equal elbow, nb size-25 mm having threaded end., dropped forged carbon steel 90 degree female equal elbow, nb size-20 mm having threaded end., dropped forged carbon steel 90 degree female equal elbow, nb size-15 mm having threaded end., dropped forged carbon steel hexagonal threaded nipple, male equal nb size-50 mm., dropped forged carbon steel hexagonal threaded nipple, male equal nb size-40 mm., dropped forged carbon steel hexagonal threaded nipple, male equal nb size-32 mm., dropped forged carbon steel hexagonal threaded nipple, male equal nb size-25 mm., dropped forged carbon steel hexagonal threaded nipple, male equal nb size-20 mm., dropped forged carbon steel hexagonal threaded nipple, male equal nb size-15 mm., forged c.s coupling 1-1/4inch dia, 1 1/4inch heavy duty cap, carbon steel, dropped forged carbon steel hexagonal head solid plug, male end bspt threading nb size-32 mm., flange connection sae 3000, size-1.5 inch for 48.3 mm od tube (hydraulic system), ms flange, size- 32 nb, moc- ms, ms flange, ansi/asme b 16.5, class-150, size- 50nb., ms flange, ansi/asme b 16.5, class-150, size- 65nb., ms flange, ansi/asme b 16.5, class-150, size- 80nb., ss316 bend 90 degree size- 1/2inch with 02 flanges (flat face) per bend size- 1/2inch (15 mm) along with fasteners, ss316 bend 90 degree size- 1inch with 02 flanges (flat face) per bend size- 1inch (25 mm) along with fasteners, brass nipple 1inch to 1/2inch, brass nipple 1/2inch, brass nipple 1inch, 25 nb ms seamless nipple sch-80, 40 nb ms seamless nipple sch-80, 50 nb ms seamless nipple sch-160, ms nipple size- 3/8inchx100 mm, ms nipple 1/2inch, nipple 1/2inch, nipple 3/4inch, nipple 1inch, ms nipple size 2inch, ss 304 nipple 1inchx100 mm, ss nipple size- 1/2inchx100 mm, s.s.pipe fitting hex nipple,male npt size-1/2 inch, ss pipe fitting hex reducing nipple,male npt size -1/2 inch, male npt size -1/4 inch, ss hex nipple, size- 1/2inch npt (m) x 1/2inch bsp (m), ss316

Central Government/Public Sector

CTN :44792249

13 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For supply of stainless steel hex nipple bore 25mm to is:1239 (part-2) 2011, table-28, matl to aisi-304, taper threads as per iso 7/1. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44773867

15 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For supply of ss hex nipple size:15 mm n8 to specn. is:1879-2010 with amd-02 (sec-7),tab-24 and matl to aisi 304, taper threads as per iso 7/1. [ warranty period: 30 months after the dateof delivery ]

Pipe Plug Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector