Latest pipe bender Tenders | Government pipe bender Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

State Government

CTN :45701688

06 Jul, 2026 NA

Aurangabad(Bh) - Bihar

Tender For short tender notice for purchase and supply of laboratory equipment in different colleges in aurangabad. - district planning office, aurangabad. - arc indicator medium, carry foster bridge, camera lucida mirror type, bar pendulum tron, bending of beem app, boyle law app double and routine, dynmo model ac/dc superior qulity, double incline planl teak wood, inertia table app, incline plane 4" aluminum arc, k-constant spring app. alum scale, hook 5 law app big size 12" glass, jagger app complete, logic gate, maxwell vibration needle brass, mew app, model of bio gas plant, model of newton law of cooling universty, post office box brass, reading telescopee, , tangent glavanometer bras deluxe, surface tension app, searle app brass, screw guage(25mm), ring ball app, pin hole camera, newton second law, newton first law, model of wind mill, model of traffic light signal controller, model of solar system electric, model of phase of moon, model of newton colur disk, model of four stroke petrol engine, hydero power turbine, gold leaf electroscope, fraction board app, electric bell, electric, 29 newton third law, spectrometer, comutatr, tunning forks (original), high resistance coil 10ohms, connecting wires, wooden stands v-shape, wooden screens black and white, geometry boxes 1 big), deflection of sound, resistance boxes 500 ohms, meter bridge, p-n junctions diode kit, plug keys (two-way), magnetic needles, tangent galvano meter, digital multi meter(superior), bar magnets(4 inches), transistor characteristics, spring constant apparatus, battery eliminator, 12volts, ammeter, volt meter, object stand of wire mesh, haguer app, galvanometer, specific gravity bottles 25ml b/s/g), soldering gun gum, lead wire, velocity of sound in air apparatus, stop clocks, magnetometer compass, copper calorimeter, tripod stands, 6x4, rheostat, 8" brass, potential meter, manganese wire, nichrome wire, soldering lead, weighing machine, resistance wire, filterpapers, ohm's law apparatus, solar cell, zenor diode app, spring balance tubuler, potestion meter 10 wire, physcis chart set of 15, three kinds of levers, pulleys (simple machines), dynamo (hindi-english), refraction of light by a prism [hindi-english, petrol engine, the steam engine, pascal's law, newton's laws of motion, light (hindi-english), refraction of light, archimedes principle, reflection of light from mirror, refraction of light through lenses, heat & temperature, sound, chemistry, test tube-15 x125 mm, borosil, glass, watch glass-3"dia, burette-50ml-screw type stop cock, borosili, conical flask-250ml-borosil glass, pipetto-20ml with one mark borosil class, measuring cylinder (100nil) with spilt cork-, borosil glass, retort stand plastic with clamp, reagent bottle-250ml, narrow mouth, indi glass borosil, reagent bottle-125ml, indian glass, narro mouth borosil, test tube-25 x 150 mm (boiling, tube) borosil, atomic model senior polylab, compound microscope- with 2 eye pleces. obj.(151), brush no "0", dissection needles, beaker-250ml-plastic, petri dish 4" dia, imported borosil glass, petri dish-polythene-4" dia, cork borer set-set of 6 sizes, brass, regular, rubber cork-one holed, cover slips-pack, filter paper-sheets, dessicator-6" dia, indian glass, with lid, chromatogrphy paper-sheets, mortar & pestle-set, porcelene, test tube stands (plastic), ipps app 500 ml plastic, model of crystel,, model of grafid, model of dimond, sprit limp s.s, bunsen surener with stop cork, gas tape 2 way, rubber cork mix, spatula 6 ss, flask round bottam 250 ml borosil, flask round bottam 500 mi borosil, flask flat bottam 250 ml borois!, falsk flat bottam 500 ml borois!, flask volumetric 250 ml borosil, beaker 250 ml boroisl, beaker 500 ml borosil, funnel 3" borosil, thisel funnel 12", cavity slide 2 cavity, rubber tubing, magnesium ribbon, gas jar 6x2 plastic, capillary tubes packet, thermo meters lab, chemistry chemical, manganese dioxide 500 gm, barium chloride 500 gm, ferric chloride 500 gm, silver nitrate

CTN :45697944

13 Jul, 2026 75.00 Lacs

Dhanbad - Jharkhand

Tender For supply of pn or zener diode or led characteristics apparatus , verification of kcl and kvl , resistance in series and parallel apparatus , ohms law apparatus without power supply , ohms law apparatus with aluminum panel 2 digital panel meters and power supply , transistor characteristics apparatus , fet characteristics apparatus , half wave full wave and bridge rectifier apparatus , ripple factor apparatus , digital logic trainer , verification of truth table of logic gates using universal gates , flip flops using nand gates and ttl ics , four bit counters synchronous and asynchronous , four bit shift registers , encoder or multiplexer eight to one line , decoder or demultiplexer one to eight line , four bit analog to digital convertor , four bit digital to analog convertor , light intensity or phase control using scr or triac , scr commutation techniques , switching action of a bjt , single phase half wave full wave and fully controlled bridge rectifier or convertor using scrs , three phase half controlled bridge converter with r and rl load , three phase fully controlled bridge converter with r and rl load , single phase cycloconverter , instrumentation trainer using transducers , burdon tube pressure gauge trainer kit , strain gauge trainer kit with cantilever beam , lvdt trainer kit , speed measurement using photo electric and magnetic sensors , temperature sensors kit , measurement of water level using strain gauge , measurement of water level using capacitance transducer , ac servo speed torque characteristic trainer , dc servo motor speed torque characteristics trainer , stepper motor controller trainer , analog lab trainer bread board model , digital lab trainer bread board model , plc trainer , transmission line trainer abcd t and pi parameters ferranti effect load test , idmt over current relay testing kit electromechanical type , buchholz relay testing kit with compressor and oil , over voltage relay testing kit electromechanical type , over current and earth fault relay testing kit three phase static type , over current relay testing kit static type , measurement of power and power factor single phase and three phase , to study a typical bhk house wiring , four to one multiplexer and one to four demultiplexer , vapour compression refrigeration vcr test rig , water cooler setup , air conditioning test rig , domestic refrigerator , window air conditioner , split air conditioner , air cooler evaporative , tube cutter , pipe bender , flaring and swaging tool kit , reamer , brazing torch , manifold gauge set , vacuum pump , refrigerant recovery unit , refrigerant charging cylinder or electronic charging scale , refrigerant leak detector , digital clamp meter , digital thermometer , anemometer , tachometer , insulation material , refrigerants , recovery cylinders , weighing machine , electrical control panel , work benches , safety equipment

CTN :45359033

27 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For bid to ras corrigendum : supply of bar bending machine , bar cutting machine

CTN :45648517

13 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply of group -1 - calibrating instrumnt_temperature sensor , group -1 - doc_calibrating instrumnt_temp. sensor , group -2 - calibrating instrument_pressure sensors , group -2 - doc_calibrating instrument_pr. sensors , group -3 - multimeter , group -3 - doc_multimeter , group -4 - clamp-on ampere meter - 500a , group -4 - doc_clamp-on ampere meter - 500a , group -5 - megger - 500-1000v , group -5 - doc_megger - 500-1000v , group -6 - thermal imager , group -6 - doc_thermal imager , group -7 - clamping tool for hydraulic hoses , group -7 - doc_clamping tool for hydraulic hoses , group -8 - electric pipe bender 0- 40mm , group -8 - doc_electric pipe bender 0-40mm , group -9 - electrical pressing unit , group -9 - doc_electrical pressing unit , group -10 - automatic halogen detectors , group -10 - doc_automatic halogen detectors , group -11 - feeler gauge , group -11 - doc_feeler gauge , group -12 - poker gauge , group -12 - doc_poker gauge , group -13 - lockers of free standing type , group -13 - doc_lockers of free standing type , group -14 - electrical test switch board , group -14 - doc_electrical test switch board

CTN :45656780

09 Jul, 2026 17.86 Lacs

Banaskantha - Gujarat

Tender For supply of spindle key , hammer sledge double faced , multiangle magnetic clamp set metal base , auto darkening welding helmet , magnetic particle testing kit , water cooled induction welding brazing machine , plastic welding machine , swaging and flooring tool kit , laboratory type induction coil , rcc pole with accessories , magnetic flux meter , tachometer analog type , single phase variable auto transformer , ac starters f star delta starter soft starter for a c motors of , domestic appliances e table fan , dc power supply , current transformer , potential transformer , single phase transformer, core type , pillar electric drill machine motorized 12-20 mm capacity , manual motor coil winding machine with step arbor , primary current injection set , wiring board , different types of engine bearing models , different types of piston model , d. immersion heater , h. washing machine semi-automatic , i. motor pump set , battery charger , digital wattmeter , digital energymeter , digital ac ammeter , digital voltmeter , 2 point starter , universal motor , 1 phase capacitor motor , dol starter , resistance types starter , auto transformer type starter , current transformer , dc ammeter , dc voltmeter , thimble , tailors square , scissors , leg shaper wooden , blanket for padding of pressing table , pattern punch , pattern notcher , pattern hanging stand , zigzag multi purpose machine , bar tack machine with low back rest , feed off the arm double needle , dummy lady, men, kid different sizes , drill twist taper shank , file flat second cut safe edge , scraper flat , scraper triangular , scraper half round , chisel cold round nose , different profile gauges plate type , knurling tool , pipe bender machine spool type with stand manually operated //bid details 2 / 55

CTN :45642678

13 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply of group -1 - calibrating instrumnt_temperature sensor , group -1 - doc_calibrating instrumnt_temp. sensor , group -2 - calibrating instrument_pressure sensors , group -2 - doc_calibrating instrument_pr. sensors , group -3 - multimeter , group -3 - doc_multimeter , group -4 - clamp-on ampere meter - 500a , group -4 - doc_clamp-on ampere meter - 500a , group -5 - megger - 500-1000v , group -5 - doc_megger - 500-1000v , group -6 - thermal imager , group -6 - doc_thermal imager , group -7 - clamping tool for hydraulic hoses , group -7 - doc_clamping tool for hydraulic hoses , group -8 - electric pipe bender 0- 40mm , group -8 - doc_electric pipe bender 0-40mm , group -9 - electrical pressing unit , group -9 - doc_electrical pressing unit , group -10 - automatic halogen detectors , group -10 - doc_automatic halogen detectors , group -11 - feeler gauge , group -11 - doc_feeler gauge , group -12 - poker gauge , group -12 - doc_poker gauge , group -13 - lockers of free standing type , group -13 - doc_lockers of free standing type , group -14 - electrical test switch board , group -14 - doc_electrical test switch board

Central Government And Public Sector

CTN :45546487

18 Jun, 2026 NA

Bongaigaon - Assam

Tender For supply, installation & commissioning of hydraulic motorized pipe bender with ms former, limit switch and stopper switch as per annexure attached. [ warranty period: 30 months after the date of delivery ] ]

CTN :45345533

18 Jun, 2026 10.15 Lacs

Lalpur - Gujarat

Tender For corrigendum : supply of bending machine conduit pipe , bus bar with brackets 1 mtr , cctv camera kit , ceiling fan coil winding machine , conduit pipe cutting and threading machines , control panel , digital multi meter , discrete component trainer , dmx controller 512 , ev charger home 1 phase input , ev charger 3 phase input , file half round 2nd cut 250 mm with handle , file round 2nd cut 150 mm with handle , knife switch dpdt fitted with fuse terminals 16 amp , knife switch tpdt fitted with fuse terminals 16 amp , ladder - tower 3 meters on tyre wheels - min 10ft - max. 30ft , lux meter lcd read out 0.05 to 7000 lumens with battery. , magnetic flux meter , mallet barwood , meter reading instrument mri , potential transformer 415 v, 50hz, pt ratio, 440v.110v,10va , power factor meter digital , primary current injection set , rcc pole with accessories , rechargeable battery 12v,100ah , rubber mat , single phase transformer , single phase variable auto transformer , smart meter 3 phase - smart energy meter , soft starter , solar dc pump 1 hp , solar panel with battery 18 watt , solar street light , solar traffic light , solid state solar base single phase energy meter , spanner d.e. set , tachometer analog type - 10000 rpm , three phase transformer , wheat stone bridge ) /bid number : gem/2026/b/7576252 * /dated: 27-05-2026 & & / bid document 1 / 40