Latest pipe clamp spares Tenders | Government pipe clamp spares Tenders

CTN :45501064

02 Jul, 2026 20.00 Lacs

Bikaner - Rajasthan

Tender For notice inviting limited tendernotice no: 01/elect./2026/ 706 date:- 10.06.2026tools & equipments of –electrician trade- heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle, , knife double bladed electrician, , chisel firmer with wooden handle, , grease gun, , (a) crimping tool, , wire cutter and stripper, , hacksaw frame, , tweezers, , drill hand brace, , plane cutters, , smoothing cutters, , file flat rough, , file flat bastard, , file rasp, half round, , the soldering gun, , contactor & auxiliary contacts (rm), , contactor & auxiliary contacts. (rm), , pin type, shackle type, egg type & suspension type insulators including hardware fitting, , portable electric drill machine, , load bank (lamp/heater type), , brake test arrangement with two spring balance rating, , laboratory type induction coil, , series test lamp (rm), , knife switch dpdt fitted with fuse terminals (rm), , knife switch tpdt fitted with fuse terminals (rm), , miniature circuit breaker (rm), , earth plate (rm), , earth electrode (rm), , elcb and rccb (rm), , fuses (rm), , rheostat (sliding type), , capacitors (rm), , various electronic components (rm), , various lamps (rm), , plug socket piano switch lamp, , holder (rm), , cables:, , twisted pair, , non-metallic sheathed cable, , underground feeder cable, , ribbon cable, , metallic sheathed cable multi-, , conductor cable coaxial cable, , direct-buried cable (rm), , rubber mat (rm), , electrician helmet, , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials, , quipment, , ohm meter; series type & shunt type, portable box type, , digital multi meter, , a.c. voltmeter m.i. analog, portable box type housed in bakelite case, , milli voltmeter centre zero analog, portable box type housed in bakelite case, , ammeter mc analog, portable box type housed in bakelite case, , ac ammeter mi, analog, portable box type housed in bakelite case, , weight wattmeter analog, , (b) frequency meter (digital), , magnetic flux meter, , tachometer, , tong tester / clamp meter, , megger, , single phase variable auto transformer, , growler, , ac starters: :- -, , f. star delta starter soft starter, , g. auto transformer type, , oscilloscope dual trace, , function generator, , discrete component trainer, , linear i.c. trainer, , digital i.c. trainer, , domestic appliances -, , g. mixture & grinder, , h. washing machine semi-automatic, , i. motor pump set, , oil testing kit, , battery charger, , current transformer, , potential transformer, , 1 5 or 17 computer or latest version, , d.c. shunt generator with control panel, , motor-generator (ac to dc) with control panel, , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, , dc series motor coupled with spring balance load with control pannel, , dc shunt motor with control pannel, , dc shunt motor with control pannel, , dc compound motor with starter and switch with control pannel, , motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed, , plate, fixing bolts, foundation bolts and flexible coupling., , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., , ac phase-wound slip ring motor with starter switch, , universal motor with starter/switch, , synchronous motor with accessories like starter, excitation arrangements., , thyristor /igbt controlled d.c., , motor drive with tacho-generator feedback arrangement, , thyristor/igbt controlled a.c. motor drive with, , single phase transformer, core type, air cooled, , three phase transformer, shell type oil cooled with delta/ star, , electrical machine trainer -, , diesel generator set with changeover switch, ov

State Government

CTN :45413511

12 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For corrigendum : tender for supply of equipment material design erection testing commissioning for sop to ms shyam indus pvt ltd co prittam singh at vill baghni by prov 1104kv 25kva sstn aw 3ph lt line in vill baghni in e section bhadwar under esd hpsebl nurpur. t - 25 kva trsanformer, prov. distribution transformer (ordinary), 11/0.4 kv, 25 kva ., prov. steel tubular poles (9 m, working load > 200 kgf/m ) ., prov. muffs with concerete filling, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for incomer line, prov. ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov. x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov. transformer bed, belting & knee bracing, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, prov. x-arm [channel iron (100x50x6 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (35x35x5 mm), length : (460 ) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov. transformer lt distribution box and go switch fixing assembly, prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov. go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov. go ab switch unit (11kv, 400a, 25 ka ) tripple pole o/d type, prov. d.o fuse unit, prov. lighting arrester, 9 kv station class (porcelain type), prov. discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), prov. stay set complete, prov. stay wire (7/3.15 mm) (6.0 kg per stay set), prov. pipe earthing set, prov. lt distribution panel box with mccb(160a, 10ka, 4p, 1no) & sfu(32a, 5no, rewirable), prov. half clamp (m.s. flat 50x6 mm), prov. full clamps (m.s. flat 50x6 mm), prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. aluminium thimble, prov. copper thimble 35 amp, prov. danger plate, prov. barbed wire, prov. lt cable (3.5 core) 50 mm , prov. energy meter 3- , 4 wire ct operated static tri-vector meter with box(ct-100a), prov. aluminum paint., prov. 6/1/3.35, 50mm ., prov. construction of foundation of transformer, erection of 25 kva s/stn. i.e. digging of pit for pole & earthing two no. poles & 3 nos. for earth drilling of holes in x-arms, preparation of plateform str. members c.i., a.l. i.e. x-arms & k.b. set, errection of d/p, concreating of rcc muff errection of plateform, errection of x-arms, d.o., l.a., mccb, switch lt box, energy meter, errection of transformer, earthing connection to g.o. switch, transformer l.a. etc., errection of stay set, jumper, pipe earthing 3 nos set, l.t. cable, barbed wire and painting complete in all respect., transportation charges @10490/-, prov. transportation charges & mannual carriage of 25 kva pole mounted distribution s/stn. (line length 0.500km), erection of 3- ph. lt line, prov. aaac (7/3.15 50mm ) { neutral conductor including 1% (sag, jumpering and wastage}, prov. steel tubular poles (8 m, working load > 200 kgf/m )., prov. muffs with concerete filling, prov. shackle insulator with d-iron, prov. lt stay set i/c egg insulator., prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. stay wire, prov. g.i wire no 8swg, erection of 8 mtr. st pole single structure i.e. digging of pit, fixing of insulator, x-arms, k.b. set, top clamp, barbed wire, danger plate, drilling of holes and filling of pit + ramming complete in all respect., sagging of conductor i.e. laying, stringing and sagging & binding with insulator (single wire per km)., sagging of g.i i.e. laying, stringing and sagging & binding with insulator (single wire per km)., erection of stay

CTN :45485403

24 Jun, 2026 12.94 Lacs

Pondicherry - Pondicherry

Tender For supply of stay bow and tightner , single phase cross arm , 24 feet rcc pole clamp , 30 feet rcc pole clamp , ht guarding channel cross arm

CTN :45382965

15 Jun, 2026 10.00 Lacs

Shivpuri - Madhya Pradesh

Tender For supply of different materials for year 2026-27 for nagar parisad kolaras - purchase of material for construction and maintance under mc kolaras year 2026-27, pcc pole 7 meter height, 6 mm alumiuom cable, led light 60 w, clamp, cement 50 kg beg, chain link fancing, ms pipe, ms angle, bricks, flage stone 40mm, flage stone 75 mm, rcc hume pipe np 3 200 mm dia, rcc hume pipe np 3 300 mm dia, rcc hume pipe np 3 600 mm dia, rcc hume pipe np4 1000 mm dia, rcc hume pipe no4 1200 mm dia, khanda, rcc half round hume pipe size 12 inch *1

CTN :45372801

06 Jun, 2026 NA

Bhavnagar - Gujarat

Tender For supply of r.c.c. pipe, paver block, rubber mod, benches, cc and rcc work, metal, pvc and gi pipe line, cement, jcb and hitachi machine, brick, bore cable starter, submersible pump motor, furniture materials, gutter tank chamber toilet, insecticide medicine lime powder supply /spraying, soil transportation by truck and tractor, rcc road construction, street light, cfl, led, street light, cfl, led repairing work, street light /cfl /led light wall and cement and iron pole iron clamp making work, street light service wire ,mcb at rajpara (bhayati) gram panchayat

CTN :45342706

02 Jun, 2026 NA

Bhavnagar - Gujarat

Tender For supply of r.c.c. pipe, paver block, rubber mod, benches, cc and rcc work, metal, pvc and gi pipe line, cement, jcb and hitachi machine, brick, bore cable starter, submersible pump motor, furniture materials, gutter tank chamber toilet, insecticide medicine lime powder supply /spraying, soil transportation by truck and tractor, rcc road construction, street light, cfl, led, street light, cfl, led repairing work, street light /cfl /led light wall and cement and iron pole iron clamp making work, street light service wire ,mcb shrichamardi gram panchayat

CTN :45157164

08 Jun, 2026 50.00 Lacs

Jhabua - Madhya Pradesh

Tender For supply of electrical material as per list for financial year 2026-27 - consumable and non-consumable materials list for financial year 2026-27: led lamp 15 watt, led lamp 18 watt, led lamp 30 watt, led lamp 50 watt, led lamp 60 watt, led tube rod 20 watt, aluminum wire 2.5 mm (300 ft bundle), aluminum wire 6 mm (300 ft bundle), aluminum wire 10 mm (300 ft bundle), flexible wire 0076 (300 ft bundle), insulation tape roll (0.75-inch, 10 m), led street light 36/50 watt (driver), led street light 36/50 watt (pcb plate), led street light 36/50 watt (with glass body), led street light 60/100 watt (driver), led street light 60/100 watt (pcb plate), led street light 60/100 watt (with glass body), led street light 150/200 watt (driver), led street light 150/200 watt (pcb plate), led street light 150/200 watt (with glass body), single g.i. pipe (dia 0.75 inch, length 1.5 meters), single g.i. pipe (dia 1.0 inch, length 1.5 meters), single g.i. pipe. 1.5-inch diameter, length (as per requirement), square pipe (2x2), led rope light with connector, 1mm copper wire, 1.5mm copper wire, 2.5mm copper wire, 4mm copper wire, 6mm copper wire, 4mm aluminum wire, 12mm aluminum wire, 16mm aluminum wire, 2.5mm 2-core aluminum service cable, 4mm 2-core aluminum service cable, 6mm 2-core aluminum service cable, 10mm 2-core aluminum service cable, 4mm 3-core aluminum service cable, 6mm 3-core aluminum service cable, 10mm 3-core aluminum service cable, 2.5mm 2-core copper service cable, 4mm 2-core copper service cable, 6mm 2-core copper service cable, 10mm 2-core copper service cable, 4mm 3-core copper service cable, 6mm 3-core copper service cable, 10mm 3-core copper service cable, 10mm 4-core aluminum armored cable, 16mm 4-core aluminum armored cable, 25mm 4-core aluminum armored cable, 35mm 4-core aluminum armored cable, 50mm 4-core aluminum armored cable, 70mm 4-core aluminum armored cable, 16mm aluminum lug, 35mm aluminum lug, 50mm aluminum lug, 70mm aluminum lug, 95mm aluminum lug, 120mm aluminum lug. 3-phase changeover switch (100a), 3-phase changeover switch (150a), 3-phase changeover switch (200a), 3-phase changeover switch (400a), single-pole mcb (16a to 32a), double-pole mcb (16a), double-pole mcb (32a), double-pole mcb (63a), four-pole mcb (16a), four-pole mcb (32a), four-pole mcb (63a), four-pole mcb (100a), tricolor roof light, steel tubular pole (6m), steel tubular pole (9m), steel tubular pole (12m), tape bundle, voltage tester, pliers, voltmeter, ammeter, clamp meter, multimeter, timer, cement pole (pcc/rcc). 6-meter pole, 50-watt solar led light, 75-watt solar led light, 100-watt solar led light, 50-watt sensor led light, 80-watt sensor led light, 110-watt sensor led light, exhaust fan, ceiling fan, 24-watt led driver, 30-watt led driver, 36-watt led driver, 47-watt led driver, 50-watt led driver, 72-watt led driver, 100-watt led driver, 150-watt led driver, 200-watt led driver, 250-watt led driver, 24-watt led pcb plate, 30-watt led pcb plate, 36-watt led pcb plate, 47-watt led pcb plate, 50-watt led pcb plate, 72-watt led pcb plate, 100-watt led pcb plate, 150-watt led pcb plate, 200-watt led pcb plate, 250-watt led pcb plate, 50-watt led street light, 75-watt led street light, 90-watt led street light, 100-watt led street light, 150-watt led street light, 200-watt led street light, 250-watt led street light, 300-watt led street light, 9-meter high-mast pole with 6 led fixtures (250 watts), high-mast pole with 6 led fixtures. 250 watt, 12.5-meter high-mast pole with 6 led fittings; 250 watt, 16-meter high-mast pole with 6 led fittings; 250 watt, 9-meter motorized high-mast pole with 6 led fittings; 250 watt, 12.5-meter motorized high-mast pole with 6 led fittings; 250 watt, 16-meter motorized

corporations/Associations/Others

CTN :45246695

02 Jun, 2026 NA

Panaji - Goa

Tender For ghrssidc/e-t/2026-27/646 - electrical fabrication - a, la cross arm clamp for 7.5 mt rcc pole (gal v) - cee/e/523, sa cross arm clamp for 7.5 mt rcc pole (gal v) - gec/e/523, la cross arm clamp for 9 mt rcc pole (gal v) - gec/e/524, sa cross arm clamp for 9 mt rcc pole (gal v) - gec/e/524, la cross arm clamp for 105 lbs/yd rail pole (gal) - gec/e/723, sa cross arm clamp for 105 lbs/yd rail pole (gal) - gec/e/723, la cross arm clamp for 60 lbs/yd rail pole (gal) - cee/e/486, sa cross arm clamp for 60 lbs/yd rail pole (gal) - cee/e/486, la cross arm clamp for 90 lbs/yd rail pole (gal) - cee/e/515, sa cross arm clamp for 90 lbs/yd rail pole (gal) - cee/e/515, la stay clamp for 60 lbs/yd rail pole (gal) - cee/e/469, sa stay clamp for 60 lbs/yd rail pole (gal) - cee e 469, la stay clamp for 90 lbs/yd rail pole (gal) - cee/e/508, sa stay clamp for 90 lbs/yd rail pole (gal) - cee/e/508, la stay clamp for 7.5 mtrs rcc pole galvanised - cee e 523, sa stay clamp for 7.5 mtrs rcc pole galvanised - cee e 523, la stay clamp for 105 lbs/yd rail pole (gal) - cee e 723, sa stay clamp for 105 lbs/yd rail pole (gal) - cee e 723, la stay clamp for 9 mtrs rcc pole (gal v) - cee e 524, sa stay clamp for 9 mtrs rcc pole (gal v) - cee e 524, 11 kv v shaped cross arm (gal v) - cee e 408, 33 kv v shaped cross arm (gal v) - cee e 408, b type modified distribution box - cee e 386, a type street light meter box with clamps - cee e 386, stay set for 11 kv lt line - cee e 500, stay set for 33 kv line - cee e 500, turn buckle& eye bolt for 33 kv line - cee e 513, turn buckle& eye bolt for 11 kv line -cee e 466, cast iron packing piece 90 lb for rail pole - cee e 514, top insulators fitting for rcc pole - cee e 506, 4 pin angle type cross arm - cee e 702, 4 pin channel type cross arm - cee e703, 2 pin angle type cross arm - cee e704, 2 pin channel type cross arm - cee e 705, earthing pipe - cee e 467, sa cross arm clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, la cross arm clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, sa stay clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, la stay clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, sa bottom clamps for fixing street light fixtures for 7.5/9mtrs rcc pole galvanised 25 mm pipe - cee e 12, sa top bottom clamps for fixing street light fixtures for 7.5 mts rcc pole galvanised 25 mm pipe - cee e 12, la top clamps for fixing street light fixtures for 7.5/9 mts rcc pole (gal v) 40 mm pipe - cee e 612a, sa top clamps for fixing street light fixtures for 7.5 rcc pole - cee e 612a, gi nut and bolts in various sizes electro galvanised, gi pins for lt pin insulator, gi pins for 11kv pin insulator, gi pins for 33kv pin insulator, gi bent pipe of nominal base 25 mm, 1 mts long for tube light fixture - cee/e 618, gi bent pipe of nominal base 25 mm, 1.5 mts long for hpsv lamps - cee/e 593a, b type modified distribution box with mccb and kit kat fuses as per cees specifications / drawings, metal parts for shackle insulators as per cees specifications, gi bent pipe of nominal base bar 40mm x 3 mts long (medium class) the pipe shaft should conform to is : 1239 (part i) 1973 as amended upto date - ee/ii/21/2009, hot dip galvanised earthing strips of size 30x160x5mm, hot dip galvanised earthing strips of size 100 x 360 x 3mm, g.i bent pipe nominal bore 40 mm ce/e xi for hpsv lamps - cee/e 593a, metal parts for disc insulator as per department 4 bolted. as per department specification & drawing - 60/4/va/cee/tech/2019-20/1282, metal parts for disc insulator 3 bolted - 60/4/va/cee/tech/2019-20/1282, kit kat fuse 100 amps, kit kat fuse 200 amps, kit kat fuses 300 amps, kit kat fuse 400 amps, tinned copper fuse wire of various sizes, aluminium crimping lugs 25 sq.mm, aluminium crimping lugs 35 sq.mm, aluminium crimping lugs 50 sq.mm, aluminium crimping lugs 70 sq.mm, aluminium crimping lugs 95 sq.mm, aluminiu

CTN :45301136

26 May, 2026 NA

Bhavnagar - Gujarat

Tender For supply of r.c.c. pipe, paver block, rubber mod, benches, cc and rcc work, metal, pvc and gi pipe line, cement, jcb and hitachi machine, brick, bore cable starter, submersible pump motor, furniture materials, gutter tank chamber toilet, insecticide medicine lime powder supply /spraying, soil transportation by truck and tractor, rcc road construction, street light, cfl, led, street light, cfl, led repairing work, street light /cfl /led light wall and cement and iron pole iron clamp making work, street light service wire at chaniyawada gram panchayat

Central Government/Public Sector

CTN :45174754

19 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - released condemned and u/s scrap abandoned old quarters under the custody of sse-works-iii-dhd, {(1) ccl/t2 (a to e), 05unit, location- ccl railway colony, (2) ccl/t/3 (a to e), 05unit, location- ccl railway colony, (3) ccl/9 (a to d), 04unit, location- ccl railway colony, (4) sat/e/1 (a to h), 08unit, location- sat railway colony, (5) sat/t/2 (a to e), 05unit, location- sat railway colony, (6) sat/t/3 (a to e), 05unit, location- sat railway colony, (7) ppd/t/4 (a to d), 04unit, location- ppd railway colony, (8) lmk/t/10 (a,b), 02unit, location- lmk railway colony, (9) lmk/e/38 (a to f), 06unit, location- lmk railway colony, (10) lmk/t/56 (a,b), 02unit, location- lmk railway colony, (11) usra/e/18 (a to d), 04unit, location- usra railway colony, (12) ret/t/5 (a to f), 06unit, location- ret railway colony}, total qty- 56 unit, consisting of {(i) ms scrap(grill, side grill, grill half door, main door, cy door, toilet door with or without frame, window rod, ms flat (50x50x5), (50x12), (50x8), (17x8 mm) gi pipe 50mm, 32mm, angle (75x75x6), (65x65x6), (50x50x4), front door with frame, verandah door with grill, tie bar, reinforcement in rcc, room door, reinforcement in rcc roof slab, reinforcement in rcc t. slab, door top grill, joint clamp, front jali, front jali door with frame, xpm jail, back door with frame, cy door with frame, boilertube 32mm, ms l65x6, steel jafri, ms flat 50x12 steel bar in, steel bar 16 dia, electric pole 50mm, ms plate 8mm thick, electric pole (50 mm), electric pipe (50 mm), fan pipe (32 mm), half jafri door), qty- 22601.82 kg approx, (ii) rail (41 lbs), front vartical rail(double heded), off size cut rail, rail 75r, rail 30 lbs, rail 52 kg behind quarter, qty- 15858.75 kg approx, (iii) masonary (brick, stone), qty- 1026.958 cum approx, (iv) wooden scrap ( window with frame, room door with frame, ventilation with frame, grill top purline, front rafter, back rafter, parlin, ventilation, purline (10x7 mm, 12x7 mm), jafri, grill top purline (16x12 mm) , wooden rafter, jafri with door, toilet door with frame, cy door with frame, qty- 24727.39 kg approx., (v) ac sheet, qty- 1615.30 sqm approx., (vi) manglore tiles, qty- 137.60 sqm}, mode of delivery by lot basis and on as is where is basis, custodian- sse-works-iii-dhd, fdp- 80 days. note- (1) hidden items other than jvr are not included in this lot, if found it will be handed over to the custodian before delivery. (2) non ferrous if any, not included in this lot. (3) description of lot is as per jvr, (4)the eligible bidder shall prepare and submit the detailed dismantling scheme including methodology, safety precautions, sequence of dismantling, equipment to be used and traffic/safety arrangements to sectional sr. den/den through sr. dmm. (5) dismantling shall be permitted only after approval of dismantling scheme by the sectional sr. den/den.

Pipe Clamp Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector