Latest pipe lifter Tenders | Government pipe lifter Tenders

State Government

CTN :45655945

06 Jul, 2026 24.99 Lacs

Dapodi - Maharashtra

Tender For corrigendum : supply of handpump spare parts at pune zp - supply of handpump spare parts, die set 12mm with handle & bits, hydraulic vice 32 mm., heavy duty clamp 32 mm, heavy duty clamp 65 mm, connecting rod vice, pipe lifter spanner for 32mm n.b.pipe., pipe wrench 300 mm, pipe wrench 450 mm, pipe wrench 600 mm, pipe wrench 900 mm, double ended open jaw spanner 17 * 18 in c.v. steel, hacksaw frame, pump bucket (nitrile) for deepwell hand pump(is: 15500 part 7), sealing ring for deepwell handpumps (is: 15500 part 7), hex nut with bolt m 12 * 40, handle axle along with nut & washer for deepwell hand pump (is: 15500 part 4), single side shielded bearing confiming to is: 15500 part 4 suitable for above handpumps, chain nut with bolt m-12x40 (is: 15500 part 4), chain with coupling for deep well hand pump, head for deepwell hand pump (is: 15500 part 4), third plate suitable for deepwell hand pump (is: 15500 part 4) (im-ll), water tank for deepwell hand pump (is: 15500 part 4) (im-ll), connecting nrod of 12 mm dia. x 3 mtr. length, i.s.i.marked galvanized steel tubes as per i:s 1239 ( part-1) /2004 amdt.1 to 4 scrwed at both ends as per i:s 554/1999 ( reaffirmed 2004) . one end socketed with isi marked socket as per is:1239 ( part -ii)/1992 ( reaffirmed 2003) and other end protected with plastic thread protector medium class , bore size (nominal)diameter 32 mm , length 3 meter, cylinder assembly i.m.ii, cylinder body with brass liner for deepwell hand pump (is: 15500 part 5), reducer cap for deepwell hand pump (is: 15500 part 5) (im-ll), upper valve along with rubber seat for deepwell hand pump (is: 15500 part 6) (im-ll), upper valve assly suitable for deep well hand pump (im-ll) (is: 15500 part 6) (im-ll), lower valve assembly i.m.ii, hacksaw blade (high speed steel), spacer g.m. i.m.ii, rubber seat lower valve (im-ll), rubber seat upper valve (im-ll)

CTN :45726059

31 Jul, 2026 25.00 Lacs

Tikamgarh - Madhya Pradesh

Tender For inviting rates of handpump repair material for financial year 2026-27 at nagar palika parishad tikamgarh - inviting rates of handpump repair material for financial year 2026-27, head assembly with handle complete (as per isi), head assembly without handle (as per isi), handle assembly complete (as per isi), water tank assembly (as per isi), stand assembly (as per isi), third plate (as per isi), g.i. riger pipe 32 m.m. isi medium b class (3 meter), g.i. riger pipe 32 m.m. isi haevy c class (3 meters), chain with cupling (as per isi), 32 mm g.i. pipe socket (as per isi), 12 mm connecting rod (as per isi) (3 meter), 12 mm connecting rod socket (as per isi), ci cylinder body only (as per isi), ci cylinder assembly with brass asseseries complete, plunger rod for cylinder, upper valve assembly complete brass (as per isi), lower valve assembly complete brass (as per isi), rubber seeting for upper valve (as per isi), rubber seeting for lower valve (as per isi), valve guide (as per isi), spacer (as per isi), brass sleep (as per isi), rubber washer (as per isi), seeling ring (cap packing) of nitric rubber (as per isi), ci reducer cap (as per isi), nut bolt for handpump (as per isi), chain nut bolt tvs (as per isi), bolt for cover (as per isi), spacer for rubber washer (as per isi), pipe lifter for 32 mm (as per isi), pipe wise 3 no. size (as per isi), pipe wise 2 no. size (as per isi), hand pump rod die set (as per isi), pipe die set 32 mm, 32 mm dia u.p.v.c. riser pipe, 32 mm c.i. adopter set for u.p.v.c. pipe, 12 " pipe wrentch (taparia/j.k./ ambika), 14 " pipe wrentch (taparia/j.k./ ambika), 18 " pipe wrentch (taparia/j.k./ ambika), 24 " pipe wrentch (taparia/j.k./ ambika), 36" pipe wrentch (taparia/j.k./ ambika), 16x17 ring spainer, 18x19 fix spainer, screw wrentch (taparia), 6204 bearing, distance piece, hexa blade, hexa frame, pipe tools, 2 tonnes chain block, 3 tonnes chain block, 5 tonnes chain block, handle axle

CTN :45724908

10 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For providing of custom bid for services - handling and conveyance of fuel (pol handling)

CTN :45725431

10 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For providing of custom bid for services - handling and conveyance of fuel (pol handling)

CTN :45733528

10 Jul, 2026 37.68 Lacs

Kalpakkam - Tamil Nadu

Tender For installation of permanent piping system for resin removal and loading from sssb water purification ion-exchange column for remote handling of resin in fuel building of pfbr

CTN :45513462

03 Jul, 2026 1.50 Lacs

Leh - Jammu And Kashmir

Tender For corrigendum : hla , thermostate valve , oil pump , vane pump , nut or bolt , coolant hose pipe , lifter , assy coolant pipe , pump gear , injector nozzle return pipe , turbocharger , assy kit lined shoe rear , air cleaner hose , air cleaner filter , field coil assy , bush carrier , clutch plate assy

corporations/Associations/Others

CTN :45707236

02 Jul, 2026 50.00 Lacs

Porbandar - Gujarat

Tender For annual rate contract for supply of sanitation materials at, various area of porbandar. - malathion powder 5 percentage isi markmalathion dusting powder 5 percentage isi marked or equivalent approved standard, larvicidal oil (malaria control oil)suitable for anti-larval mosquito control operations in stagnant water bodies, drainsand breeding sites. material shall conform to applicable public health standards andshall be supplied in original sealed containers., fogging machine 6 kgsthermal fogging machine, chemical tank minimum 6 ltr, fuel tank minimum 1.2 ltr, output minimum 40 ltr/hour, complete with accessories.warranty : minimum 12 months, mask3 ply disposable face mask, non-woven fabric, adjustable nose clip, soft elasticear loops, adult size, suitable for sanitation and public health operations., gloves for daily use cotton hand gloves for sanitation workers, heavy duty pvc/rubber gloves for sanitation work, broom (long)technical specificationtype : coconut stick broom (long size)material : good quality dried coconut leaf sticksweight : minimum 500 gramslength : minimum 1200 mmstick length : uniform sizebinding : heavy duty gi wire / nylon cord bindinghandle : without handleconstruction : compact and firmly boundquality : free from rotten, broken, fungus affected or damaged coconut sticksmoisture content : dry and suitable for immediate useapplication : sweeping of roads (also on wet surface), footpaths, public places,open areas and general sanitation workdurability : suitable for regular municipal sanitation operationspacking : as per manufacturer/supplier standard packingacceptance criteriaweight shall not be less than 500 grams.loose binding, broken sticks, rotten material or poor workmanship shall not beaccepted.pmc reserves the right to verify weight and quality at the time of delivery, broom (long)technical specificationtype : coconut stick broom (long size)material : good quality dried indonesian coconut leaf sticksweight : minimum 500 gramslength : minimum 1200 mmstick length : uniform sizebinding : heavy duty gi wire / nylon cord bindinghandle : without handleconstruction : compact and firmly boundquality : free from rotten, broken, fungus affected or damaged indonesiancoconut leaf sticksmoisture content : dry and suitable for immediate useapplication : sweeping of roads (also on wet surface), footpaths, public places,open areas and general sanitation workdurability : suitable for regular municipal sanitation operationspacking : as per manufacturer/supplier standard packingacceptance criteriaweight shall not be less than 500 grams.loose binding, broken sticks, rotten material or poor workmanship shall not be accepted.pmc reserves the right to verify weight and quality at the time of delivery, broom (big)technical specificationtype : coconut stick broom (big size) with handlematerial : good quality dried coconut leaf sticksweight : minimum 300 grams (broom portion only)broom length : minimum 600 mmhandle material : seasoned wooden handle / bamboo handlehandle length : minimum 1200 mm (4 feet)handle fixing : firmly fixed with gi wire / nylon ropebinding : heavy duty gi wire / nylon cord bindinguniform and dense coconut sticksfree from rotten, broken, fungus affected or damaged coconut stickssuitable for main road sweeping, market areas, open grounds and generalsanitation workmunicipal grade qualitydurable and long lasting, safety jacket (universal size) safety green / orange reflective / yellow/ whitewith pmc marking on back side with minimum 6 inch height reflective printing., shovel (pavda) with handletype : heavy duty ms shovel (pavda)blade material : heavy duty msblade thickness : minimum 1.5 mmhandle material : hardwoodhandle length : minimum 900 mmfirmly fixed handlesuitable for garbage handling, silt removal and general sanitation workmunicipal grade quality, trikam with handletype : heavy duty trikam (pickaxe) complete with handlehead material : forged high carbon steel / drop forged steelhead weight : minim

State Government

CTN :45702947

30 Jun, 2026 NA

Rohtak - Haryana

Tender For fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 1. 80 mm i/d , installation of shallow/medium/deep tubewells as per is 2800:1991 development of tube well according to clause 9.3 of is: 2800-1991 (part-i) as amended up to date and specifications attached and as directed by the engineer-in-charge of the work including the cost of all consumable stores, fuel, oil, compressors, pumps and machinery etc. as required for the work. 1. compressor 450cfm x 250 psi , installation of shallow/medium/deep tubewells as per is 2800:1991 electric logging of tube well. , installation of shallow/medium/deep tubewells as per is 2800:1991 supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 2. 15 hp motor

Central Government/Public Sector

CTN :45302597

29 Jun, 2026 NA

Bangalore - Karnataka

Tender For bid to ras tender for supply of fuel feed line blank -male , inserting tool , puller - shurlock-sl61 wt-m16 , dummy feed hose , special socket -alh-12437 , blanking plug for refueling valve , teflon dummy for fuel system , open end spsnner -thin 27 x 32 , blanking plate-fuel tank , fmt neck dummy plate , blanking plate bottom for aux tank , blanking plate top for aux tank , ncw dummy al welded , fmt tank side plate , rmt neck dummy cover , weighing beam , tow bar - aluminium -iss h1 , towing bar , trolley - mgb , tm engine trolley - turbomeca , alignment tool , wrench ext actuator assy , rigging tool-for direction control , spanner-tds , stand-tail boom , alignment tool , spacer-01 set of 4nos , protractor - issh1 , tab bending tool- iss h2 , rigging tool-clinometer mounting , assembly fixture , clinobar block , rigging fixture , alignment tool -for tds bracket , insertor - tds assy segment-3 , extrator - tds assy , drift , tow bar -wheel version , extracting tool -tail rotor assy , spanner - special , spanner - special , storage stand -floor board , special socket spanner , eo pod trolley , handling trolley -radar ant , desiccator removal tool-for eo pod , nitrogen purging valve -for eo pod , lifting sling-20 mm turretgun inst , lifting device assy , socket -for eo pod , media , media , static discharge pole , jacking tool , bucking bar , hoisting of alh , checking tool -strut-bracket assy , drill jig -for casing ring iss d , aris alignment fixture -ots , extractor , insertion tool , removal tool -support bush-trs , actuating media-upper control assy , ids lifting sling , base plate c-brg bush removal tool , extraction tool , moving table with wheels , installation trb stand , levelling bar , levelling bar , storage stand - mrb , locator -for stabilizer bracket , engine oil replenishment tool , holding tool ots and non ots mgb hsg , steeering arm , grip gaurd -grip collective stick , dail gauge holder -mra , spl socket spanner tommy bar 450 lg

Central Government/Public Sector

CTN :45197749

30 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology - secondary master reference - pt 2 d , secondary master impeller stage-1 , laby.root measure tool , inspection tool , inspection tool , inspection tool , high frequency pin + equipment , handling box , tightening pedastal , pin , dn12 pipe , multi purpose flange blank , exp extractor , support connectors , blanking plate , immobilizer , blanking cover , flat seal , test fixture , assembly tool , raising device , support of assembly , support , tool circlip fitting , errection support , removal tool , handling tool , immobilizer pin , adaptation link , assembly fitting , balancing tool , milling fixture , rectification tool , flow check tool , fr plr assy tool , base casting , sleeve fitting tool , marking block , inspection fixture , errection tool , seal assembly cone , rotating plate , hydraulic pressure generating tool , variseal setting , measuring tool , measuring tool , measuring tool , assembly spacer , extractor , seal setting tool , test adaptation , test tool (for tm0073g001) , support tool (for tm0073g001) , special tightening tip , checking tool , control tool , control tool , ring removal/installation , assembly tap cylinder , test interference , grinding fixture for pt1 blade , grinding fixture pt stg 2 , plate cutting tool , handling tool , segment clue tool , handling tool , set of guides , det 2 of tm2689 g101 , lifting tool , engine support mount , setting & removal tool , balancing tool , blank , withdrawal tool , rear bearing seal removal tool , errection support , errection support , orientation tool , adaptation without target , adaptation with target , sheath , sheath , protector , removal tool , assembly support , fuel leak drain check tool , wrench & immobilizer , erection support , handling tool , adaptor fitting , adaptor fitting , wedge height , extractor , air intake cover , shuttle box , key , flow check tool , erosion / impact check tool , erosion / impact check tool , graduating rule , boroscope positioning support kit

Pipe Lifter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector