Latest pipe plug Tenders | Government pipe plug Tenders

Central Government/Public Sector

CTN :44792749

14 Apr, 2026 NA

Pune - Maharashtra

Tender For pipe plug for sand trap assembly of 3-phase locos as per drawing no 4tacg9ua-2, rev-1. one sample to be got approved before bulk supply. [ warranty period: 30 months after the dateof delivery ]

Central Government/Public Sector

CTN :44767724

21 Apr, 2026 2.69 Crore

Korba - Chhattisgarh

Tender For supply of spares of flowmore make pump of model f5975ds c c > f> f - wearing ring casing, part no. - f597516 , pump shaft 40-c8, part no. - f59751 , key pump half coup., part no. - f59752 , oil seal for brg. cover at d.e., part no. - f59753 , hx hd cap screw, part no. - f59754 , bearing housing d.e., part no. - f59757 , bearing cover d.e., part no. - f59755 , stuffing box cover d.e. and n.d.e., part no. - f59759 , water seal tube, part no. - f597511 , clinch fitiing, part no. - f597513 , key for impeller 1st stage , part no. - f597514 , inter stage bush, part no. - f597517 , key for ipeller 2nd stage, part no. - f597520 , shaft sleeve, part no. - f597522 , split gland assy., part no. - f597527 , water thrower, part no. - f597529 , oil seal for brg. hsg., part no. - f597530 , grease nipple bearing housing, part no. - f597531 , pipe plug for vib and temp at brg. h, part no. - f597532 , bearing housing n.d.e., part no. - f597533 , bearing cover n.d.e., part no. - f597535 , lock nut for brg., part no. - f597536 , lock washer for brg, part no. - f597537 , grease relief fitting for brg hsg, part no. - f597538 , shaft collar, part no. - f597539 , sleeve nut n.d.e., part no. - f597540 , pipe nipple gland drain, part no. - f597541 , lower half casing, part no. - f597543 , u bend for casing, part no. - f597545 , sleeve nut d.e., part no. - f597550 , upper half casing, part no. - f597512 , clinch fitting, part no. - f597559 , eye bolt, part no. - f597556 , fourway adoptor, part no. - f597560 , impeller, 1st stage, part no. - f597515 , inter stage sleeve, part no. - f597519 , impeller 2nd stage, part no. - f597521 , o-ringshaft to shaft sleeve, part no. - f597526 , pipe plug for casing drain, part no. - f597554 , pipe plug gauge and air vent, part no. - f597555 , priming plug, part no. - f597557 , spr dgwel sleeve, part no. - f597553 , stuffing box bush, part no. - f597523 , water seal ring, part no. - f597525 , rotating assly, part no. - flrauf5975ds //bid details 2 / 48

CTN :44537994

15 Apr, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of 25brsc001 spares of various types of ro plants e e -thermister overload relay , filter pump shaft seal , split cone with nut , oil filler cap , conductivity meter with sensor , abs service kit ro 8107 , 825 mm long hose , victualing coupling gasket , pressure gauge , flow meter , 575 mm long hose , 930 mm long hose , 1000 mm long hose , cartridge filter complete , servo motor control valve 230v 3 8 , solenoid valve ve83 , pressure transmitter , pressure transmitter , flow switch , running time meter , main control switch , relay , charging plug , seal ring charging , split pin , repair kit for pre filter pp , abs service kit , globe valve sampling cock pvc 1 4 bsp f , quick acting coupling , ss service kit for ro 510 5s 10s , pulley for pump , taper bush 1610 bore 24 mm , taper bush for hp pump motor , bearing hp motor , bearing hp pump , hp motor bearing nde , valve kit for hp pump , oil seal , manifold head , valve kit con 6 no 206535 206536 206537 206538 206539 206540 , cylinder screw , spring washer , bearing cover , radial seal for plunger rod , pressure ring p30 43 130 , pressure spring , shim 1 2 circle bearing case , oil seal crank case , hp pump discharge manifold , coil spring 70 kg , anode plug zinc anode , tee pu4 , 1 4 mxpu4 elbow , 1 4 fxpu4 elbow , cartridge filter element , cartridge filter housing 20 , cartridge filter assembly 20 , nozzle set for frp filter 1354 , media for sand filter grade i , support gravel 1 5 3 0 mm , support gravel 2 0 3 0 mm , hp pump c case oil , jubilee clips 00 13 mm to 20 mm , handle , flexible tube pl4 , dt module service exchange 3 tpd ssk subs , dt module service exchange 5 10 20 30 tpd opv , lip seal dt module , o ring for head distributor assembly , o ring distance fitting inside , hp flexible hose , high pressure hose l800 , rubber hose 20mm , hose 20mm with threaded end connections , lp hose for air line , hp pump driving belt set , h p pump driving belt set of 2 , coupler for victaulic coupling 1 , belt spanner , pressure switch , valve set , prefilter filter pump shaft seal , sleeve gasket , mechanical seal p 105 , sleeve gasket p 37 , neck ring p 45 , ring circle p 931 , o ring , prefilter pump , anode plug , valve kit , seal kit , seal oil crankshaft , rod connecting assy , o ring crankcase cover , seal oil crankcase , retainer seal 2 pc , adapter male , spacer v packing , plug for priming , mainfold discharge , seal kit , valve kit , anode plug , o ring oil filler cap , seal ring charging screw , o ring for head distributor assembly , o ring cartridge filter housing , cartridge filter element , filter element , o ring hp connection , groove ring gasket flange , hydraulic disc , dt module service exchange , gf pvc u fitting pipe clips d25 , abs solvent cement 100 gm , ball valve 2 way 20mm , abs ball valve 2 way 25 mm , abs ball valve 2 way 32 mm , hp elbow 1 for smcv , pl4 pipe , pu 4 hose , pu9 pipe , victualic coupling 1 , victaulic couplings 1 1 4 , coupler for vict coup1 , pipe clamp 32 mm 2 bolt , permeate male elbow , pvc elbow 1 4 xpl4 , pvc tee pu 4 , connector straight , smcv spindle & seat , smcv valve spindle unit , solenoid valve 3 8 f 2 way ve83 , sampling cock , ball valve ss316 1 2 bspf wp 70 bar , non return valve pvc 3 8 , mcb 2a , thermostat , hrc fuse 2 amp , main control switch 63a , pressure gauge 0 10 bar , pressure transmitter 0 100 bar , cleaner for membranes 11 , cleaner for membranes 22 , cleaner for membranes 33 , temperature indicator , rubber hose 20mm , lp hose 25mm id bare hose , lp hose 25mm idx1 bspmx500l ss316 , lp hose 32 mm id bare hose , lp hose 32mm , hp hose to module , hp hose to smcv , hp hose module out , hp flexible hose , high pressure hose module outlet , hp hose of module in , hp hose raw water brine 2500l , hp pump crank case oil , belt spanner , jubilee clips 00 13mm to 20 mm , jubilee clips for d 25 , ss jubilee clips for dn 32 pipe , ss jubilee clips 2x 45 mm to 60 mm , jubilee clip

CTN :44784971

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44784972

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44726263

01 May, 2026 NA

Ernakulam - Kerala

Tender For tender for supply of v belt sea water pump ax56 , supply hand pump 3000072 , pipe injector over flowa a bank , pipe , strainer l ooo filler neck , hexbolt m8x1 25x95 8 8cl , ring round cord , screw plug , sleeve , rotor gear lo pump drysun , pipe air starting , pipe union , cap , impeller , key for impeller , washer , paper insert oil centr fug , spares kit unpack sea water pump , rubber ring for he 8 shel , hexagon screw , screw m 12x60 , hexagon screw , hexagon screw m10x1 5x30 10 9c , hexbolt m16x1 5x65 960 8g , screw hexagon , bolt m16x1 5x75 cl 10 9 , screw allen , stud m8x1 25x25mm 8 8 cl , hexagon nut , washer spring srl no 6 16 , spring ring , cylinderical pin 32 , dowel pin 33 , spring dowel pin m6x24mm 34 , grooved dowel pin 35 , ring locking 36 , ring locking 37 , ball bearing 38 , ball bearing 39 , valve starting air 40 , washer copper 41 , safety valve l o f head 42 , zinc anode 43 , cylinder liner 44 , ring set 45 , lub oil pump shaft 46 , lub oil pump shaft 47 , d pin bearing cap sur nitrid 48 , rod push 49 , gear wheel front 50 , support of rocker arm complete 123206100037 51 , cover 52 , gasket 53 , gasket shaped 54 , lub oil pipe 55 , lubricating oil pipe 56 , nest tubes v12 oilcooler 57 , support plate 58 , fuel off solenoid 59 , pipe flex inj o flow resistant 550l 60 , pipe flex flame res 1500l banjoswelling 61 , pipe flex flameres 800l 62 , fuel filter element coarse 63 , gasket 64 , gasket swp in out 65 , set of o rings 66 , set of copper washers 67 , set of flex fuel pipes fire resistant 68 , screw adjusting rocker 69 , hex screw 70 , bolt 71 , spring washer 72 , valve spring inner 73 , ring locking 74 , screw banjo 9411033404 75 , gasket 76 , washer copper 77 , ring cord round 78 , o ring 79 , o ring 80 , o ring 81 , o ring for cylinder liner 82 , filter disposable 83 , banjo screw 84 , con rod bolt 85 , gear wheel front 86 , washer packing 87 , pipe air starting 88 , plug 89 , cylinder head 90 , v belt a 54 cogged 91 , gasket for he 8 shell 92 , hose piece 93 , screw hex 94 , screw allen 95 , shc screw m10 x1 5x20 96 , clamping element 97 , flex pipe hand pump 98 , stud 99 , stud bolt 100 , stud bolt 101 , spring washer 102 , spring washer 103 , gasket shaped 104 , gasket 105 , hose 80x70 106 , gasket 107 , o ring 108 , breaker 100a circuit moulded case 415v 109 , hexegon screw m14x2x60 8 8 cl 110 , o ring 111 , filter cartridge 112 , connecting rod assy 113 , dipstick 114 , o ring 115 , valve seat exhaust 116 , cam shaft assembly v12 117 , kit repair for k 27 118 , coupling flange 119 , valve cone exhaust 120 , segmentsur nitr treat 121

Central Government/Public Sector

CTN :44734143

13 Apr, 2026 67.42 Lacs

Chandrapur - Maharashtra

Tender For supply of spares of flowmore make pumps c c - oil ring d.e.andn.d.e. , 3 stg part no. fm590bd211053353003 , split gland, 3 stg part no. fm590bd211053353007 , water seal ring split type , 3 stg part no. fm590bd211053353009 , oil sight window assy., 3 stg part no. fm590bd211053353043 , balancing water conn. line assy., 3 stg part no. fm590bd211053353061 , water seal tube, 3 stg part no. fm590bd211053353062 , balance valve, 3 stg part no. fm590bd211053353033 , bearing bush d.e.andn.d.e. , 3 stg part no. fm590bd211053353044 , counter sunk screw, 3 stg part no. fm590bd211053353032 , imp. key, 3 stg part no. fm590bd211053353018 , impeller, 3 stg part no. fm590bd211053353023 , large seatingandbush del cover , 3 stg part no. fm590bd211053353031 , neck bush, 3 stg part no. fm590bd211053353021 , pipe plug, 3 stg part no. fm590bd211053353014 , pump shaft, 3 stg part no. fm590bd211053353002 , shaft sleeve d.e. , 3 stg part no. fm590bd211053353010 , shaft sleeve n.d.e. , 3 stg part no. fm590bd211053353037 , key for pump half coup. , 3 stg part no. fm590bd211053353001 , combined diffuserandreturn vane, 3 stg part no. fm590bd211053353017 , delivery diffuser, 3 stg part no. fm590bd211053353024 , imp. key part no. fm590bd211053353035 , stay bolt suc cover to del cover part no. fm590bd211053353025 , middle body - stage, 3stage part no. fm590bd211053353016 , wearing ring casing, 3 stg part no. fm590bd211053353012 , balance valve part no. fm590171232441033 , counter sunk screw part no. fm590171232441032 , impeller part no. fm590171232441023 , large seatingandbush for delivery cover part no. fm590171232441031 , pump shaft part no. fm590171232441002 , imp. key part no. fm590171232441035 , bearing bush d.e.andn.d.e. part no. fm590171232441044 , wearing casing part no. fm590171232441012 //bid details 2 / 31

Central Government / Public Sector

CTN :43131737

07 Apr, 2026 NA

Mathura - Uttar Pradesh

Tender For corrigendum : 9050m25e68_supply of spares and consumables for cfr engines - list of item(s) / work(s) as per tender documents, safety shutdown system kit; p/n: g-813-1, solenoid assembly (50 hz); p/n: a109334n, standard chrome ring; p/n: 106222b, standard compression ring; p/n: 106222a, standard oil ring; p/n: 23505, connecting rod bearing; p/n: 106137a, exhaust valve; p/n: 106625a, intake valve; p/n: 23436b, cylinder guide plate; p/n: 23065b, condenser body gasket; p/n: 75690, water inlet cap gasket; p/n: 109421, water pipe gasket; p/n: b5096a, spark plug; p/n: 111460, oil filter; p/n: 111346, carburetor sight glass gasket; p/n: 7597, exhaust pipe flange gasket; p/n: 110523, allen head pipe plug, 1/8"; p/n: 26416, bulk tygon tubing, 3/8" od x 1/4" id; p/, horizontal jets, p/n: g-814-39

Central Government/Public Sector

CTN :44676308

17 Apr, 2026 63.85 Lacs

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of providing support services at site by deploying one number technical asst of graduate / diploma in civil engg for assiting aai engineers (highly skilled) for day to day attending maintance works complete as directed by eic. , providing support service at civil maintanence office by deploying one number multi tasking computer operator (highly skilled) for office works to aai officials complete during office hours as directed by eic. , providing support service at civil maintanence office by deploying one number multi tasking office assistant (semi skilled) on day to day basis for handling of office file movement , dispatch of official dak , taking xerox and ensuring cleanliness of work space etc. complete in general shifts as directed by eic. , providing 03skilled & 03 semi skilled in shifts wise for attending various day to day complaints and rectfying the defects/cause of complaints with necessary tools and plants and for attending routine inspection , preventive maintanence complaints like false ceiling sheet fixing , repair of tap leakages , block removal of wash basin/ sink/rain water pipes and any other small petty/urgent works as directed by engineering in-charge. , regulation of gvmc water and bore well water through valve operation by providing 01 skilled plumber with 01 assistant helper (unskilled) at airport/ buchirajupalem /viman nagar as per daily requirement including weekly inspection of total pipe line. , providing ess support service at residential colony by deploying one (unskilled) for day to day cleaning of roads , drains etc. complete in general shifts as directed by eic.

CTN :44653136

16 Apr, 2026 NA

Etawah - Uttar Pradesh

Tender For tender for supply of wick long tab , valve plug , o ring ohaulingkithp pumpseal retainer , front , anode plug , hp pump seal kit , oil filler cap , oil seal crankshaft , plunger rod pin , v-packing case , hp pump female adapter , hp pump male adapter , valve spring retainer , valve plug 70 kg , hp pump anode plugs , seal kit , valve set , oil seal crankshaft , connecting rod assebly , plunger rod , plunger rod pin , oil seal crank case , seal retainer - 2 pc , barrier slinger , hp pump inlet manifold , adaptor h.p.pump , male adaptor , v packing spacer , spacer with coil springs , valve plug 70kg , o ring overhauling kit , crankcase casing , straight connector 3-8 , permeate male elbow , cartridge filter element , nozzleset for filter consist of filterhead tube strainer , frp filter type 1354 , nozzle set for frp filter 1354 , nozzle set for sand filter , head distributor , media for sand filter grade-i , support gravel 1.5-3.0 mm , support gravel 2.0-3.0 mm , dolomite , membrane cleaner 22 , membrane cleaner 33 , membrane solution 44 , h.p pump c case oil , jubilee clips 00 13 mm to 20 mm , s.s jubilee clips 1x 30 mm to 40 mm , ss jubilee clips 2x 45 mm to 60 mm , high pressure manifold 3 x 2 arrangement , high pressure manifold 6 x1 , module bypass nozzle , support bracket , pure water manifold , pu9 hose , tie rod nut high , h p connection feed/brine , lip seal dt module , membrane cushion , blue hydraulic disc , o ring for head distributor assembly , o ring hp connection , o ring hydraulic disc , o ring distance fitting inside , o ring distance fitting outside , o ring tie rod screwing inside , o ring crank case cover , o-ring pos. no. 412 for speck pump npy 2051 , high pressure hose module outlet , hp flexible hose , h.p hose feed inlet-brine outlet , brine r/w h.p. flexible hose , brine r/w hp flexible hose-xl , brine raw water high pressure , rubber hose from c-f outlet to hp pump inlet 20-30tpd , lp hose for prefilter pump , hose for pk-20 pump in-out , product water flex hose-fm manifold to plant , lp hose brine - permeate , end conn hoses brine/permeate , rubber hose 20mm , lp hose for air line , av mount akcc 85m , mounts for plant , a/v mount for hp pump trolly , h.p pump driving belt set of 2 , coupler for victaulic coupling 1 , victaulic couplers 1.1-4 , belt spanner , pulsation damper , jubilee clip 40mm , membrane solution 44 , pressure switch , belt hp pump driving , hp pump anode plugs , contractor , o-ring for deacidification filter , o-ring for cartridge filter , kit wear parts , sleeve gasket , neck ring p 45 , neck ring retainer , motor for 30tpd filter prefilter pump , mechanical seal p 105 , sleeve gasket p 37 , corrugated spring p 60 , spacing pipe - 66.a , bearing ring p 47a , spacing pipe -p 64.c , slotted nut p 67 , coupling complete for pump 202699 p 8 , stay bolt for pump p 26 , chamber complete p 4 , neck ring p 45 , neck ring retainer , pump shaft complete for pump 202699 p 51 , chamber with bearing ring p 4a , impeller , spacing pipe - p 64.a , wear part kit - repair kit , split pin , ball bearing , p 154 , shaft pin p-10 , top guide vane p 50a , spacing pipe p 64 , chamber stack for pump 202699 p 80 , chamber , crn 1- 4 pump spindle , crn 1- 4 pump shaft seal p-105 , o-ring 137.5 od x 3.3 thk , shaft pin 50d x 26l , o-ring 16.3od x 2.4 thk 100 , neck ring , neck ring retainer , impeller 30.6id x 73 od x 9h , shaft seal , chamber with bearing ring , neck ring retainer , chamber with bearing ring) , shaftseal p105 , kit , gaskets , cm 3-5 pump 415v 3ph 50hz.ip55 , cm 3-5 sleeve p-16 , cm 3-5 impeller p-49 , chamber , seal ring , filter pump permeate pump , filter permeate pump casing , ring-circlips p-931 , filter permeate pump grub screw , o ring , shaft seal , casing p-1 , reverse vane impeller , p-2b , shaft p-6 , cover for mech seal , sleeve shaft p-14 , i b bearing p-16 , o.b. bearing p-18a , circlip internal p-18b , oil drain plug

Pipe Plug Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector