Latest pipe rack Tenders | Government pipe rack Tenders

State Government

CTN :45003994

29 May, 2026 NA

Karur - Tamil Nadu

Tender For corrigendum : pipe rack corroded structurals changing work in bagasse yard at pulp mill mechanical in tnpl unit-1

CTN :45169297

06 Jun, 2026 NA

Guna - Madhya Pradesh

Tender For supply of computer assesories & computer & printer - name o itom, smps 450/ for desktop, compatible with standard atx cabinet, with power cable, smps 500w for desktop, compatible with standard atx cabinet, with power cable, ram 4gb /ddr4, compatible with existing system, ram 8gb ddr4, compatible with existing system, hard disk 1tb sata, 7200 rpm or higher, ssd /128gb/256gb/512gb sata/nvme for faster performance, motherboard atx/micro atx, compatible with intel i3/, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, motherboard atx/micro atx, compatible with intel i5or amd ryzen, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, motherboard atx/micro atx, compatible with inte i7 or amd ryzen, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, motherboard atx/micro atx, compatible with amd ryzen, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, cpu cooling fan with heat sink, intel/amd compatible, cmos battery cr2032 for motherboard, keyboard usb wired standard 104 keys/keyboard wirless+mouse, mouse usb optical/wirless mouse, lan cable cat per mtr, rj connector, toner cartridge compatiblehp series , +, ink cartridge (black/color) compatible with printer model, ink bottle 65 135 ml for ink tank printers (cmyk), fuser assembly for laser printer, complete unit, pickup roller for paper feeding mechanism, drum unit compatible with printer hp, drum unit compatible with mfp, printer logic board (formatter board), usb printer cable 1.5 3 meter, high-speed, desktop repair service including fault diagnosis and minor repair, os installation (windows/linux) with drivers and configuration, formatting & software installation, virus removal and optimization/anti virus, data backup / recovery, preventive maintenance (cleaning and check-up), technician visiting charges, printer repair service including troubleshooting, cartridge refilling (ink/toner), printer head cleaning, roller / fuser repair, printer installation & setup, amc (annual maintenance contract), technician visiting charges (printer), cctv bullet camera 2mp full hd, ip67, ir 30m, outdoor nos, cctv dome camera 2mp, ir 20m indoor nos, ip camera bullate/dome 2mp, ip camera bullate/dome 4mp/5mp, ip camera bullate/dome 5mp, cctv bullet camera 5mp hd, ir 40m nos, dvr 8 channel hd with remote monitoring, hdmi/vga, mobile viewing nos, nvr 8/channel for ip cameras with lan support nos, nvr /16 channel for ip cameras with lan support nos, nvr 32 channel for ip cameras with lan support nos, surveillance hdd 2tb, 24x7 recording support nos, poe network switch 8+2/4+2/+16+2, smps 12v 10a power supply with metal box nos, bnc connector for cctv connection nos, dc connector for camera power supply nos, coaxial cable rg59 with power cable copper meter, coaxial cable rg59 with power cable copper feet, lan cable cat6 for ip camera networking meter, lan cable cat6 for ip camera networking feet, pvc pipe 20mm for cable protection meter, junction box weatherproof for camera mounting nos, led monitor 22 inch hdmi/vga for cctv display nos, rack for dvr/nvr wall mount with lock nos, cctv installation including wiring, fixing, testing complete job, cctv configuration & testing job, amc cctv system yearly year, lcd projector basic, 3000 ansi lumens, xga or higher, hdmi/vga, 5000 hrs lamp life nos, lcd projector mid range, 3500-4000 ansi lumens, wxga/full hd, hdmi/usb/vga nos, lcd projector high end, 4000-5000 ansi lumens, full hd, hdmi/usb/lan, 8000 hrs lamp life nos, projection screen 6x4 or 7x5 feet, wall mount/manual nos, ceiling mount kit heavy duty adjustable nos, hdmi cable 10-15 meter high speed nos, vga cable 10-15 meter nos, audio speaker 20-40 watt for projector nos, wireless presenter / laser pointer nos, power extension board surge protected nos, projector installation including mounting, wiring, testing job, training & demonstr

Co-operative

CTN :45259478

30 May, 2026 1.10 Crore

Mysore - Karnataka

Tender For design, supply and installation of ms structural for outdoor pipe bridge, pipe rack, wall supports etc at mymul mega dairy, mysore

CTN :45027295

29 May, 2026 9.80 Lacs

Nellore - Andhra Pradesh

Tender For corrigendum : strengthening of pipe rack 9a to 9e and 3a to 3c of stage-i.

CTN :45267511

10 Jun, 2026 NA

Mumbai - Maharashtra

Tender For structural works in pipe rack for petro resid fluidized catalytic cracking (prfcc) unit & its associated facilities project at bpcl mumbai refinery.

State Government

CTN :45085207

30 May, 2026 NA

Ukai - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - wt 5171g work for dismantling shifting and stacking of fly ash conveying pipe rack power cable c & i cables and other auxiliary part related to convey of m/s ambuja ceme..

Central Government And Public Sector

CTN :45034478

04 Jun, 2026 NA

Chittorgarh - Rajasthan

Tender For tender for supply of radiation resistant cctv camera : : - type-ii (color ccd/cmos , 100m rad) radiation resistant camera head along with radiation resistant pan & tilt unit and mounting brackets. as per attached annexure-1 , corrigendum annexure-2 and annexure-3. , cabling system to transmit signals form vault cameras to ccu system which includes camera to ccu radiation resistant composite cable of 300 meters with 6 sets of cable connectors and applicable power cables as per annexure-1 , corrigendum annexure-2 and annexure-3. , field camera control unit and its racking system which includes 2 no. of camera control unit sub rack & 6 sets of camera control unit (ccu) cards (3 to be installed in field and 3 to be kept as spare for future ) as per annexure-1 , corrigendum annexure-2 and annexure-3 or equivalent sub rack system as per annexure-1 , corrigendum annexure-2 and annexure-3. , setup to convert ccu signals to optical signals which should include 3 no. of fiber optic transmitter and receiver set (capable of 4 camera system) and 6 no. of fiber patch cords , single mode , simpex and 3 no. of light interface unit 12 port , as per annexure-1 , corrigendum annexure-2 and annexure-3. , type-vi (color ccd/cmos sensor , non rr auto dome camera) with mounting brackets as per annexure-1 , corrigendum annexure-2 and annexure-3. , mechanism to transmit signal from non radiation resistant camera including , poe power supply for non-rr ptz camera (6 no.) field jb /rack in ss material for non-rr ptz camera (2 no.) liu 6 port , din rail mountable for non radiation resistant ptz camera (3 no.) din rail 8 port un-managed network switches (3 no.). 4 no. of fiber patch cords , single mode , duplex for non-radiation resistant ptz camera or equivalent as per annexure-1 , corrigendum annexure-2 and annexure-3. , mechanism for receiving signal at control room including light interface unit 24 port , rack mount (2 no.) and network video encoder (minimum 16-channel) along with accessories for intra-panel connections (2 no.) and 24 port un-managed network switches or equivalent (2 no.) , 4 no. of fiber patch cords , single mode , duplex as per annexure-1 , corrigendum annexure-2 and annexure-3. , recording and monitoring pc as per annexure-1 , corrigendum annexure-2 and annexure-3. , joystick suitable for mounting on control room panel cutout as per panel drawing as per annexure-1 , corrigendum annexure-2 and annexure-3. , 21 inch led backlit led color monitor as per annexure-1 , corrigendum annexure-2 and annexure-3. , video monitoring software setup as per annexure-1 , corrigendum annexure-2 and annexure-3 for minimum 9 camera. , mobile dolly consisting of camera control unit (ccu) , encoder , switch , joystick , engineering laptop with 15-inch to 17-inch screen , video management software for one camera , connection cables etc and their cabling as per annexure-1 , corrigendum annexure-2 and annexure-3. , control panel/rack 42u/ 27u setup for racking all instruments of cctv at control room as per annexure-1 , corrigendum annexure-2 and annexure-3. , cabling network optical fiber cable (6 core armored cable)-2000 meters twisted pair cable , rs485 , signal cable -200 meters unarmored coaxial cable rg59 -200 meters ethernet cable , cat-6 utp cable -610 meters video connector set -10 meters ethernet connectors rj-45 100 pieces conduit for cables 800 meters and other separate cables/ power cables/accessories required during installation one set of tool tackles for assembly/ disassembly/ of radiation resistant camera head viz. allen keys , lubricants , cable ties , loctite , heat sink , blank caps etc. 2 no. of control panel/rack size 27u setup for racking all instruments of cctv at field as per annexure-1 , corrigendum annexure-2 and annexure-3. as per annexure-1 , corrigendum annexure-2 and annexure-3 . , site installation & commissioning as per annexure-1 , corrigendum annexure-2 and annexure-3. , spare radiation resistance camera head s

Central Government/Public Sector

CTN :45203118

21 May, 2026 16.81 Lacs

Visakhapatnam - Andhra Pradesh

Tender For fabrication, removal & replacement of chutes in mill house & lsds classified bunkers liners changing bunkers fabrication & errection ( modification) revisioning of two planetary mixers transfer car revisioning & repair and damaged buckets repair revisioning of 2nos.of 10 ton eot cranes revisioning & repair of electrical hoists screw conveyor trough changing & repair repair of grain heaters structural repair of bucket elevators replacement of liners in the stone bins and repair of rat holes in bunkers and repair/replacement of retainer plates in pre-heater discharge end shell plate conical position changing/repair remove charging and discharging side kiln shell flange plates, fix new ones along with nose ring segments and align with inner/outer segments removal of transfer chute transfer chute repair and replacement of tongue plates repair/replacement of kiln discharge end grating. revision/replacement of all valves filters heaters(heat exchangers) gauges and pumps of phe unit and pipe rack assembly kiln discharge chutes repair replacemnt girth gear guards of kiln repair including fabrication and repair of heat shields,kiln shell repair at weak sections revisioning of 7.5ton eot cranes revisioning of hoists above kilns

CTN :45048307

08 Jun, 2026 NA

Tarapur - Maharashtra

Tender For : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of spares for diese