Get complete information related to latest Pipe Saddle Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pipe Saddle Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pipe Saddle Tenders.
Tender For repairing of distribution system pipeline, saddle (upvc), new fhtc for under kulnagar village of bhatar z-ii piped water supply scheme of bhatar development block within durgapur sub-division under burdwan division phe dte
Tender For repair work on the engine and transmission oil cooler, including dismantling, fitment, and replacement of the air seal and bolts repair of the seat and blade arm joint ball stud with material filling and fabrication of the a-frame for dozer 13593
Tender For repairing of damaged y ph.(top conductor-twin-moose) conductor by dismantling/stringing with repair sleeve/joint sleeve on 400 kv charal-kosamba line between 146(s) to 147(s) under 220 kv limbdi jurisdiction of am div. limbdi of tr circle surendranagar.
Tender For corrigendum : supply of primary supports for nalco alumina 5th stream refinery - supply of primary supports, including packing & forwarding as per mr., pipesaddle, un 3786-01, consisting of plate, acc. to, un 3786-03 and manufact., drwg., loose point, plate 1.0038 s235jrg2, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of u-bolt, contact surface,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025vizag(3)+damanjodi(22)=25, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570, contact surface,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570, contact surface,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025vizag(38)+damanjodi(222)=260, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(23)+damanjodi(291)=314, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(4)+damanjodi(451)=455, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(5)+damanjodi(321)=326, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(60)+damanjodi(354)=414, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(3)+damanjodi(114)=117, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(10)+damanjodi(64)=74, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(5)+damanjodi(77)=82, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of two u-bolts, contact surface,, acc. to un 3786-03, and manufact. drwg., fixed, point, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of two u-bolts, form a din 3570, contact, surface, acc. to un 3786-03, and manufact. drwg., fixed, point, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of two u-bolts, form a din 3570, contact, surface, acc. to un 3786-03, and manufact. drwg., fixed, point, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025vizag(3)+damanjodi(27)=30, u-bolt, un 3786-01, consisting of two u-bolts, form a din 3570, contact, surface, acc. to un 3786-03, and manufact. drwg., fixed, point, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025, u-strap, un 37
Tender For repairing and overhauling of pump of bay no.-3 at tn-7 pump houses along with replacement of three nos. dismantling joint at tn-6, tn-7, tn-10 pump houses under integration of swtp, kmda.
Tender For supply of non sparking hammer (q3) , hrc fuse as per is 13703 (q3) , pillar taps (v2) as per is 1795 (q3) , pipesaddles (q3) , compression cable lugs (q3) , taps or valves of nonferrous metals (q3) , led batten (q2) , table fan / wall mount fan / ceiling mount fan as per is 555 (q3) , saw blades or hacksaw blades as per is 2594 (q3) , led batten with battery / invertor (q3) , flamproof cable gland-is:12943 (q3) , tubular hacksaw frame (q3) , self drilling screw (q3) , digital multimeter (q3) , electrical sleeves as per is 11654, is 5831 (q4) , non flammable electronic contact cleaner (q3) , emery cloth (q3) , electrical box extension (v3) (q4)
Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 25) , outside micrometer (25 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling a
Tender For supply of set of pipesaddle for wag-9/wap-7 loco as per specn. clw/es/3/0038 alt. f [ warranty per iod: 30 months after the date of delivery ]
Tender For corrigendum : providing and installation of electro-mechanical accessories at cwr site and allieds works at ekpara pwss, block-rampurhat-i under bolpur mechanical division - supply and delivery of openwell submersible pumping machinery set suitable for wet pit installation complete with stainer along with all accessories with following specification: pump : discharge (q) : (1800-1280) m3/hr. & head (h) : (19-38) mtrs.method of starting : sd, shaft-stainless steel-ss-304, impeller- crome steel/ci/s.s / bronze, suc & del size- 90/80 mm dia, type of position-horizontal. mechanical sealmotor : 12.5hp (suitable for open well)operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2800 rpm, method of starting : s/dmake : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor. ( n.b : manufacturers test certificate along with charecteristics curve, moc and gurantee certyificate have to be submitted at the time of delivery.), supply & delivery at site of 35 mm x 3.5 core size aluminum armored, xlpe insulated 1.1 k.v. grade cable, conforming to is 7098(i) as per direction of eic.(make:- gloster / polycab / mescab / or any approved vendor list of phed.) ( n.b : manufacturers test certificate have to be submitted at the time of delivery.), supply & delivery of 100a kit-kat rewireable (porcelain fuse carrier & base) (make:- havells / l&t / or any approved vendor list of phed.), supply & delivery of 100 amps re-wireable porcelain fuse unit type tpn main switch with steel sheet enclosure (conforms: is/iec600947-1&3). (make: havells /approved vendor list of phed.), supply & delivery of re-wireable type tpn changeover switch 100 amps 415v, 50hz, 4 pole offload with steel sheet enclosure (conforms: is/iec60947-1&3). (make: havells /approved vendor list of phed.), 100 amps, 4way, wall mounted copper busbar chamber with steel sheet enclosure (conforms:is/iec:60947-3). (make: havells /approved vendor list of phed.), supply and delivery of the following pipes, valves, pipes and gauges etc at site-- (make: approved vendor list of phed.), 100mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 150mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 100mm dia m.s. blank flange 15mm thick perforated as per is1538., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 100mm dia. cast iron double flanged manually operated rising spindle type sluice valve generally conforming to is: 14846, having body, door, dome / bonnet, gland in graded cast iron to is 210 gr. fg 260, four faces of ss aisi 304 and spindle nut of gunmetal to is 318 gr. ltb 2, outside screw rising stainless steel aisi 304 spindle, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges faced and drilled to is:1538 table 4 & 6. valves tested by closed end method only. (moc & tc needed for valve)., 100mm dia. cast iron double flanged single door swing non-return valve generally conforming to is:5312 part i, having body, door, cover in graded cast iron to is 210 gr. fg 260; body & door rings of stainless steel to ss aisi 304 , hinge pin of ss aisi 304, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges drilled to is 1538 table 4 & 6.(moc & tc needed for valve)., 100 mm dia dismantling joint pn-1.0 ci dismantling joint complete galvanised , stud, nut and washer and follower flanges, drilled to is:1538 table 4 & 6. ( at delivery side of pump ), supply & fixing of perforated gi cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. s&f gi connector, 6mm dia ms suspender, bolts & nuts, steel fastener etc. as required of the following size. incl. al painting of ms support. [200x50x1.25mm x 3mtr long