Latest pipe threader Tenders | Government pipe threader Tenders

CTN :43825263

04 Feb, 2026 NA

Howrah - West Bengal

Tender For auction sale of others - condemned structure abandoned iron tank [excluding pipe] at good shed- howrah, qty- 01 unit, total qty- 01 by lot. condition-1] the sold lot will be handed over to the purchaser in presence of concerned custodian , isa-sv, rpf, cdms and other personnel as the case may be , 2] dismantling work of sold structure is to be done by the purchaser on his own arrangement by providing tools, safety gears, machinery and labour required for the purpose. 3] purchaser should ensure to keep a safety banner around the work spot. 4] any loss / damage that may arise during dismantling work due to accident etc, shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances, 5] dismantling of the sold lot is allowed only up to the ground level of the condemned structures. 6] dismantling of the condemned structures [sold lot] will take place in presence of engg. officials. 7] purchaser shall ensure that dismantling work does not affect or endanger safety of life and railway property in near vicinity.8] no explosives can be used for demolishing, 9] materials will be sold on "as is where is" basis.

CTN :43562875

13 Feb, 2026 NA

Panchkula - Haryana

Tender For corrigendum : supply of special machinery tool and machinal tools for vehicles or spare part g g - gear box mechanical jack , hexagonal socket set , deill bit , 4 hand grinder cutting blade , hammberlbs , 36 no 46 no50 nogoti withrod , filter opener all type , dril mechain , small shocket set , oil can , chuck nut hub opener rh lh , ring spanner 6x7 to 30x32 , d spanner 6x7 to 30x32 , combination piler 8 , nose piler 8 , screw driver 10 , screw driver 8 , screw driver 6 , screw driver 4 , screw driver phillips 10 , screw driver phillips 8 , screw driver phillips 6 , screw driver phillips 4 , chisel cold 19 , chisel cold 17 , hammer ball pin 2 lbs , feeler gauge 1 to 05 mm , adjustable wrench 10 , center punch , steel fut rule 12 , punch pil , file flat bastard 10 , file flate smouth 6 , file flate tranglur 6 , file square 6 , scissors 8 , l n key 3 to 10 mm , lock nose piler inner side 6 , lock nose piler outer side 6 , pipe wranch 10 , tool box steel , oil fuel filter pre sec tata 1212 bsiii , clutch sleev cylinder 60 gear box tata 1212 bsiii , clutch master cylinder tata 1512 bsiii , oil filter tata 407 bsiii , fuel w t septer tata 407 bsiii , hub oil seal inner tata 1212bsiii , hub oil seal outer tata 1212 bsiii , seat cover mm bolero , foot mat mm bolero 5 pic , steering cover ) /bid number : gem/2026/b/7109060 * /dated: 13-01-2026 & & / bid document 1 / 39

corporations/Associations/Others

CTN :43822913

13 Feb, 2026 NA

Jammu - Jammu And Kashmir

Tender For auction sale of tin cutter etc,aluminium tray,cotton for serge coat blue etc,computer chair revolving,condemned/unsv items medical equipments,burnt oil,camp table plastic sun shine,s/steel bucket dia 13,carpanter tools,,garden umbrella with allu frame,condemned motor vehicle spare parts,,steel air cooler,acrylic plastic sheet appointment stand,badmintion racket,tyre,obsolete spare parts of mt,e waste items etc,machinery and equipments,moulded chair plastic,plastic chair,burnt oil,woolen carpet,badminton racket,badminton rocket,steel almira small,office chair steel,vehicle spare parts,vehicle tyre etc

State Government

CTN :43813272

10 Feb, 2026 1.31 Lacs

Alappuzha - Kerala

Tender For annual plan 2025 26 support to farm mechanization establishment of farm machinery clinics -strengthening existing workshop facilities alappuzha purchase of workshop tools

CTN :43761238

19 Feb, 2026 14.91 Lacs

Anantnag - Jammu And Kashmir

Tender For supply of procurement of logistics for post harvest management of medicinal and aromatic plants at verinag d d - drying racks , dehydrators or drying ovens , solar dryers , pruning shears , sickles or harvesting knives , harvesting baskets or containers , transportation carts trollies etc. , grinding mills or machinery , pulverizes , mixing equipment , collection containers for essential oils , packaging machines for pouches, bottles, etc. , weighing scales , sealing machines , ph meters , moisture meters , microscopes , centrifuges , glassware and lab consumables , labelling machines , branding irons or tools , environment friendly packaging materials for ma ps products , biodegradable packaging materials bags, packets etc. , rust free containers , tea processing machinery , extractors or infusion equipment , waste bins , composting equipment for organic waste , grading tables , colour grading machine , first aid kit , fire extinguishers , personal protective equipment ppe , fume hoods

State Government

CTN :43774432

07 Feb, 2026 NA

Kozhikode - Kerala

Tender For supply of tools/ diagnostic devices/ workshop equipments/ spare parts to farm machinery clinic, kozhikode.

State Government

CTN :43410887

10 Feb, 2026 10.00 Lacs

Kollam - Kerala

Tender For corrigendum : supply of tools diagnostic devices/ workshop equipments spare parts to farm machinery clinic, kollam. (annual plan 2025 26 support to farm mechanization) - part 1-hand tools, mechanic tool setsupplying a comprehensive professional-grade the mechanics tool kit with a durable, impact-resistant moulded suitcase (bmc case) with designated compartments for each component, ensuring easy portability and organization and includes the chrome-vanadium tools and accessories listed as appendix 11. 1/2" drive set a) hexagonal socket (19 pcs) sizes: 8, to 32 mm b) star socket (5 pcs) sizes: e10, e12, e14, e16, e20 c) flex handle (1 pc) length: 375 mm d) ratchet wrench (1 pc) 1/2" drive, 45 teeth (reversible) e) extension bars (2 pcs) lengths: 75 mm (3"), 250 mm (10") f) universal joint (1 pc) 1/2" drive g) three-way adaptor (1 pc) 1/2" female 3/8" male h) spark plug sockets (2 pcs) sizes: 16 mm and 21 mm i) l-handle (1 pc) 1/2" 10" 2. 3/8" drive set a) 12-point socket (15 pcs) sizes: 6, to 22 mm b) ratchet wrench (1 pc) 3/8" drive, 45 teeth (reversible) c) extension bars (2 pcs) lengths: 75 mm (3"), 150 mm (6") d) universal joint (1 pc) 3/8" drive 3. 1/4" drive set a) screwdriver bits (26 pcs, 25 mm length, s2 steel) b) phillips (ph): ph0, ph1, ph2, ph3 c) pozidriv (pz): pz0, pz1, pz2, pz3 d) slotted (sl): sl4, sl5.5, sl7 e) hex (h): h2, h3, h4, h5, h6, h7, h8, h10 f) torx (t): t10h, t15h, t20h, t25h, t27h, t30h, t40h g) bit holder (1 pc) 1/4" hex h) hexagonal sockets (9 pcs) sizes: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm i) star sockets (5 pcs) sizes: e4, e5, e6, e7, e8 j) ratchet wrench (1 pc) 1/4" drive, 45 teeth (reversible) k) extension bars (3 pcs) lengths: 50 mm (2"), 100 mm (4"), 150 mm (6") l) universal joint (1 pc) 1/4" drive m) three-way adaptor (1 pc) 3/8" female 1/4" male n) spinner handle (1 pc) 1/4" 150 mmo) flexible extension bar (1 pc) 1/4" 150 mm 4. combination spanners (17 pcs) sizes: 6, to 24 mm 5. flare nut spanners (5 pcs) sizes: 8 10, 10 12, 11 13, 12 14, 17 19 mm 6. hex key set (10 pcs) sizes: 2.5, 3, 4, 5, 6, 7, 8, 10, 12, 14 mm 7. machinist hammer (1 pc) 300 g with fiberglass or wooden handle 8. combination pliers (1 pc) 7" 9. locking pliers (1 pc) 10" curved jaw lock wrench 10. slotted screwdrivers (2 pcs) sl6.5 100 mm and sl6.5 150 mm 11. phillips screwdrivers (2 pcs) ph2 100 mm and ph2 150 mm 12. stubby screwdrivers (2 pcs) ph2 38 mm and sl6.5 38 mmall sockets, spanners, and ratchets shall be made from chrome vanadium steel (cr-v), heat-treated, and chrome-plated for corrosion resistance. screwdriver bits shall be of s2 alloy steel for high torque resistance. ratchets shall have a minimum of 45 teeth with a quick-release and reversible mechanism. all tools shall conform to din / iso standards or equivalent. suitcase colour should be standard industrial colour (black / blue / grey or similar)- preferably tapariya or eastman, tee spanner set including spanners ranging from 8 mm to 19 mm made from chrome vanadium steel (cr-v), hardened and tempered for durability, the handle shall be t-shaped, providing maximum torque and grip and surface finish shall be nickel-chrome plated for corrosion resistance.preferably tapariya or eastman, deep socket set consist of sockets from 8 mm to 22 mm, made of chrome vanadium steel, fully hardened, tempered, and chrome-plated, the sockets shall have six-point or twelve-point configurations for high torque applications, suitable for use with ratchet handles and extension bars.preferably tapariya or eastman, combination plier 6" manufactured from high-grade alloy steel, with precision machined jaws, cutting edges induction-hardened for long life. handles shall be double-dipped with insulated grips for comfort and safety.preferably tapariya or eastman, combination plier 8" manufactured from high-grade alloy steel, with precision machined jaws, cutting edges induction-hardened for long life. handles shall be double-dipped with insulated grips for comfort and safety.preferably ta

State Government

CTN :43753344

09 Feb, 2026 9.94 Lacs

Kottayam - Kerala

Tender For supply of tools or workshop equipments to farm machinery clinic kottayam

CTN :43080052

05 Feb, 2026 NA

Kamrup - Assam

Tender For corrigendum : g-14- supply, installation, commissioning and testing of equipment and machinery for 9 nos. of nurseries, revival of beels and nbs related works under crbifrermp (lot 1-mechanized and hand tools) - grand total of schedule 1, schedule 2 and schedule 3, currency 1 - inr

CTN :43080053

05 Feb, 2026 NA

Kamrup - Assam

Tender For corrigendum : g-14- supply, installation, commissioning and testing of equipment and machinery for 9 nos. of nurseries, revival of beels and nbs related works under crbifrermp (lot 4 - essential tools and accessories) - grand total of schedule 1, schedule 2 and schedule 3, currency 1 - inr

Pipe Threader Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

State Government

State Government