Latest pipelaying Tenders | Government pipelaying Tenders

CTN :45716595

13 Jul, 2026 4.50 Lacs

Najibabad - Uttar Pradesh

Tender For supply of fabrication c c - damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , install valve in steam line at pan no 2 550 mm 1 , install valve in steam line at pan no 2 550 mm 2 , install valve in steam line at pan no 2 550 mm 3 , install valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and install new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick //bid details 2 / 117 / / 1 1 /item category plate and depositing scrap in scrap yard , dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new pl

CTN :45686137

09 Jul, 2026 6.64 Lacs

Tirupati - Andhra Pradesh

Tender For removing of old pipeline and providing new pipe line from boiler to steam vessels at spw degree college tirupati reserved for sc or st or wadderas individuals only unemployed and retrenched engineers

CTN :45636059

30 Jun, 2026 6.77 Lacs

Bardhaman - West Bengal

Tender For repairing of vct boiler no. wbl-6035 at madhaipur colliery under pandaveswar area and repairing of boiler injector and steam pipeline 9, 1, 5 and 6 pit of madhaipur colliery

CTN :45632219

02 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of commercial multifunction steam vessel versatility precise temperature control system with six module tray as per sow , provision of vitrified tile flooring below steam vessel size 8x8 ft pdf layout design mandatory to upload , provision of vitrified tile work with sliding wooden doors below granite cupboard size 10x3 ft , provision of core cutting for fresh water pipeline inlet, electrical wiring inlet drain water outlet , supply and installation of 1 point 1kv grade 16 sq mm 5 core armoured cable x lpe pvc is 7098 with required excavation brick work and cable marker as required 120 rmt approx length , supply and installation of 100 a breaker and 40 a 4pole mccb industrial socket connection , supply and installation of cpvc fresh water pipeline for equipment size 3 by 4 inch 1by 2 inch , supply and installation of commercial g i ducting for steam vessel size length 9 ft with 18 inch exhaust fan , commercial ss table for steam vessel size 3x3x3ft , supply and installation of 25lph industrial ro water purifier with connection , provision of 6w inverter for led touch control panel of steam vessel , installation and commissioning charges if any in addition to above

State Government

CTN :45597870

10 Jul, 2026 14.12 Lacs

Korba - Chhattisgarh

Tender For work of application of rock wool insulation with sheet in boiler duct & steam/ water pipeline of unit no. 3 & 4 of 210 mw, abl boiler of ph-ii, htps, korba west.

corporations/Associations/Others

CTN :45564954

18 Jun, 2026 6.00 Lacs

Nagapattinam - Tamil Nadu

Tender For supply erection and commissioning of cooking equipments for amma unavagam in nagore bus stand at nagapattinam. - supply of following ss vessels, plastic materials & mixy, tilting grinder and other equipments at site etc., complete, ss sambar karandy, ss water drum 50 litres capacity, ss water jug, ss plate, ss oil cane, ss tumler, ss spoon, ss murum, filter karandy, aluminium bucket ( 25 l - 15 kg), emergency light, mobbu, plastic container ( 50 litres), plastic container ( 10 litres), plastic mate, plastic stool, broom, cloth mate, idly cloth, ss arival munai, repaire for tilting grinder ( 15 litres), wall clock, mixcy with 3 jar, supply, erection and commissioning of stainless steel pulveriser of 50 kg per hour capcity with 2 hp single phase motor etc., complete, steam generatorthe outer jacket is made of 6mm & 8mm thick ms plates. inner shell by 2mm thick aisi 304 grade ss sheet and inner bottom plate by 4mm aisi 304 grade ss sheet. steam generator is fitted with necessary accessories viz. automatic float ball assembly, pressure gauge meter, water level indicator, safety valve and drainage valve etc.,this lid is made of 1.6mm stainless steel sheet. all outlet copulings are stainless steel. it is operated by gas/firewood. the capacity of steam, size ms outer : 28" dia x 45" hss inner 17" dia x 35" h, m.s. fire bar stand, 6" dia ms smooke pipe, instalation charges, rice cooking & multipurpose vessel it is fabricated by 304 grade 2b finish stainless steel sheet. the vessel and the perforated plate is made of 2mm thick ss sheet. the perforated plaste is kept at a distance of 100mm from the bottom plate for the effective filtration of kanji 1" drainage nozzle is fitted plate with ball valve for draining the "kanji"the vessel lid is made of 1mm thick 304. grade 2b finishes thickness stainless steel sheet. vessel sides are supported by 65mm dia ss rod with steam inlet connection. tilting handle pipe of 28mm dia ss pipe provided with locking arrangements. it is fitted with stam inlet 33mm dia pipe, size 19" dia x 19" h (15kg), ss legs for vessels, service connection accessories l.t. 1100v pvcbain marie (hot case)fabricated by 1.25 mm sheet. it consists of 2 nos ss container, each container 10 litre capacity. it is mounted on ss standsize : 24" l x 14" b x 11" h ( ii holes), size : 24" l x 14" b x 11" h ( ii holes), supply of ss waste dish landing table with the following specificationoas : 1100 x 600 x 850 mmtop : made out of 304 grade 16 swg ss sheet bottom cross bars & garbage chutelegs : made out of 16 swg 40mm od ss pipe legs with adjustable nylon boots, supply of ss plate collecting trolley with the follwing specificationoas : 600 x 500 x 750 mm top : made out of 304 grade 16 swg ss sheet trays duly supported by ss pipeus : 01 nowheel : the trolley is fitted with rotating wheels with stopper, steam pipe line and fitting and supply of following materials for gas pipeline works and fittings 4 cylinder connections

corporations/Associations/Others

CTN :45564955

18 Jun, 2026 6.00 Lacs

Nagapattinam - Tamil Nadu

Tender For supply erection and commissioning of cooking equipments for amma unavagam in gh campus at nagapattinam. - supply of following ss vessels, plastic materials & mixy, tilting grinder and other equipments at site etc., complete, ss sambar karandy, ss water drum 50 litres capacity, ss water jug, ss plate, ss oil cane, ss tumler, ss spoon, ss murum, filter karandy, aluminium bucket ( 25 l - 15 kg), emergency light, mobbu, plastic container ( 50 litres), plastic container ( 10 litres), plastic mate, plastic stool, broom, cloth mate, idly cloth, ss arival munai, repaire for tilting grinder ( 15 litres), wall clock, mixcy with 3 jar, supply, erection and commissioning of stainless steel pulveriser of 50 kg per hour capcity with 2 hp single phase motor etc., complete, steam generatorthe outer jacket is made of 6mm & 8mm thick ms plates. inner shell by 2mm thick aisi 304 grade ss sheet and inner bottom plate by 4mm aisi 304 grade ss sheet. steam generator is fitted with necessary accessories viz. automatic float ball assembly, pressure gauge meter, water level indicator, safety valve and drainage valve etc.,this lid is made of 1.6mm stainless steel sheet. all outlet copulings are stainless steel. it is operated by gas/firewood. the capacity of steam, size ms outer : 28" dia x 45" hss inner 17" dia x 35" h, m.s. fire bar stand, 6" dia ms smooke pipe, instalation charges, rice cooking & multipurpose vessel it is fabricated by 304 grade 2b finish stainless steel sheet. the vessel and the perforated plate is made of 2mm thick ss sheet. the perforated plaste is kept at a distance of 100mm from the bottom plate for the effective filtration of kanji 1" drainage nozzle is fitted plate with ball valve for draining the "kanji"the vessel lid is made of 1mm thick 304. grade 2b finishes thickness stainless steel sheet. vessel sides are supported by 65mm dia ss rod with steam inlet connection. tilting handle pipe of 28mm dia ss pipe provided with locking arrangements. it is fitted with stam inlet 33mm dia pipe, size 19" dia x 19" h (15kg), ss legs for vessels, service connection accessories l.t. 1100v pvcbain marie (hot case)fabricated by 1.25 mm sheet. it consists of 2 nos ss container, each container 10 litre capacity. it is mounted on ss standsize : 24" l x 14" b x 11" h ( ii holes), size : 24" l x 14" b x 11" h ( ii holes), supply of ss waste dish landing table with the following specificationoas : 1100 x 600 x 850 mmtop : made out of 304 grade 16 swg ss sheet bottom cross bars & garbage chutelegs : made out of 16 swg 40mm od ss pipe legs with adjustable nylon boots, supply of ss plate collecting trolley with the follwing specificationoas : 600 x 500 x 750 mm top : made out of 304 grade 16 swg ss sheet trays duly supported by ss pipeus : 01 nowheel : the trolley is fitted with rotating wheels with stopper, steam pipe line and fitting and supply of following materials for gas pipeline works and fittings 4 cylinder connections

CTN :45525406

22 Jun, 2026 NA

Pondicherry - Pondicherry

Tender For main work : construction of canteen building for the puducherry technological university inside the ptu campus under rusa fund. sub work : providing and fixing of kitchen chimney, gas pipeline connection and kitchen equipment for the canteen building inside the ptu campus under rusa fund (iii call) - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

Central Government/Public Sector

CTN :44970893

16 Jun, 2026 NA

Burnpur - West Bengal

Tender For bid to ras corrigendum : providing of custom bid for services - elimination of leakage (online) of steam, compressed air & nitrogen pipeline of different pressure under control of odpl department

CTN :45464050

16 Jun, 2026 38.06 Lacs

Parlakhemundi - Odisha

Tender For construction of 4 mtr dia rcc intakewell and pipelaying,20000 ltr sump

Pipelaying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector