Get complete information related to latest Pipeline Supports Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pipeline Supports Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pipeline Supports Tenders.
Tender For providing and supplying material - supplying and providing health material, supplying and erecting modulartype switch6a/10a, supplying and erecting street light bracket for erection of single fitting made from 40 mm. dia b class g.i.pipe 1.0 m in length, 36 watt led light sensor, 50 watt led light sensor, 36 watt led light without sensor, 50 watt led light without sensor, light bracket, pvc tapes, electric service wire, 5a switch, mcb box, 32 amp switch, armoured cable, 16 amp fuse, 32 amp fuse, pipe clamp, fitting and labour charge, providing cement concrete foundation including excavation for the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles) (16-3-2), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5 x 3.65 x 3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no.oh-pl/stp, supplying and erecting street light bracket made from 25mm.dia b class g.i. pipe 0.6m.in, supplying and erecting led street light fitting suitable for 36w to 40w led street light, including lamp,with pf > 0.95 class ip 65, supplying and erecting led street light fitting suitable for 50w lamp, including lamp, with pf > 0.95 class ip 65, supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65., supplying and erecting led street light fitting suitable for 90w led street light, including lamp, with pf > 0.95 class ip 65., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95 class ip 65, supplying and erecting led flood light fitting of 150w, including lamp, with pf > 0.95 class ip 65, providing rental basis hydraulic bucket vehicle of hight 13 mtr. and weight capacity 200 kg with driver, oprator and disel etc.for day basis, labour charges for led fitting on street light or ms light pole., dismentaling charges led street light of pole, 1.25 mm crca sheet metal enclosures box for timmer and mcb, supplying pvc insulated pvc round sheathed 1.5 sq.mm, supplying and laying armoured cable 4c x 6 sq.mm, supplying and laying armoured cable 4c x 10 sq.mm, supplying and laying armoured cable 2c x 10sq.mm, supplying and laying armoured cable 4c x 16 sq.mm, supplying erecting & marking spmcb 6a to 32a,b-series (for lighting) 5-3-3, supplying erecting & marking dpmcb 6a to 32a, bseries (for lighting) 5-3-7, supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching "on" & switching "off" street light as per daily sunset and sunrise respectively, supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm complete, supplying & erecting crimping type coper lugs for cable upto 1.5 to 6 sq mm complete, supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials.4-4-3, supplying & erecting mains with 2x1.5 sq mm f.r copper pvc insulated wire laid in provided conduit/trunking/inside pole, supplying & erecting mains with isi mark wp2 x 6sq mm 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire no 8 swg 1-4-3, supplying & erecting mains with isi mark wp2 x 2.5 sq mm 1100v grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, supplying & erecting mains with isi mark wp2 x 10.00 sq mm 1100v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, 25 amp, 32 amp three phase l/t contactor, 2.5 sq mm multistand copper wire, insulation tape, water proof tape, street light pole box frp, cement street light pole clamp, m.s. street light pole clamp, led street light arm bend pipe, small size frp box f
Tender For construction of slab 150 mtr. at village khadlow alongwith small culvert with hume pipe in gp sunhara under mlalad deposit work sh providing and laying 900 mm dia hume pipe culvert including approaches and providing and laying cement concrete pavemen
Tender For corrigendum : tender for supply of supply of bakelite sheet with 1nos of 6a dp mcb and stud type connector suitable for 4cx 6sq mm cable complete as required. , supply of 25w led street light luminiare with pre die cast aluminium housing and ip 66 protection , pf greater than equal to 0.95 , thd less than 10 percent , cri greater than equal to 70 as per technical specification complete as required. , supply of lt power cable of 1.1 kv grade of following sizes aluminium conductor xlpe insulated pvc sheathed armoured cable confirming to is 7098 part-i-1988 with upto date ammendment as required. a) 3.5 c x 95 sq. mm , supply of lt power cable of 1.1 kv grade of following sizes 4c x 6sq.mm(copper conductor) , supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket , bend , couplers etc. conforming to is 14930 , part ii complete with fitting and cutting , jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. a) 63 mm dia (od-63 mm & id-50 mm nominal) , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. a) above 35sq.mm and up to 95 sq mm , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. b) up to 35 sq mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. a) 3.5c x 95 sq.mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. b) 4c x 6sq.mm(copper conductor) , itc of gi octagonal pole of following length in reinforced cement concrete 1 ratio 2 ratio 4 (1 cement 2 coarse sand 4 stone aggregate 40mm nominal size) foundation i/c excavation and refilling etc. complete as required a) 5 mtr. height , itc of 30w led street light luminiare on existing pole bracket i/c connection with 1.5sq.mm frls copper wire complete as required. , earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. , providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut , bolt , spring , washer excavation and re-filling etc. as required. , earthing with g.i. earth pipe 4.5 metre long , 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. , providing and laying earth connections , from earth electrode with 6 swg dia , g.i wire in 15mm dia , g.i pipe from earth electrode including connection with g.i. thimble excavation and re-filling as required. , providing and fixing 6 swg g.i. wire on surface or in recess for loop earthing alongwith the existing cable as required. , design , fabrication , supply , installation , testing & commissioning of outdoor feeder pillar , cubicle type , made out of 2 mm thick crca sheet , totally enclosed , ip 55 , free standing , floor mounting , dust and vermin proof , indoor , compartmentalised , suitable for operation on 3 phase and neutral , 415 v , 50 hz ac system , including internal wiring with suitable size wires/cable , interconnection , duly powder coated painting etc. , including supply & installation of following switchgears , metering instruments and accessories in the feeder pillar as required as per attached boq in atc , shifting of 5 mtr height str
Tender For bid to ras custom bid for services-emergency repair/ replacement of header in kb line pump house under age e/m (west) of ge (west) agra-1 taking down supplying, fixing, testing and commission of ms header made out of heavy duty erw pipe of size 300 mm dia with end plates of 6 mtrs length with inlet connection 200 mm dia03 , and outlet connection 150 mm dia -03 nos on pcc pillars complete all as specified and directed. note:- all accessories like all fittings ( standard ms fittings with welded joint shall be used on the pipes) including tees, elbows, d-joint, reducer, union , flanges, rubber gaskets, gi nuts bolts, washer, including supporting/ fixing the pipe on floor/wall/ ceiling with clamps, hangers, angles with clamps, hangers, angles as per specification complete with two or more coats of synthetic enamel paint of approved make/ shade over one coat primer complete. 01 job 2 taking down and s&f ms pipe erw steel including specials, nominal 300 mm dia as per is 3589 (1981) thickness 5.4 mm. 3 taking down & s&f ms pipe erw steel including specials, nominal 200 mm dia as per is 3589 (1981) thickness 5.4 mm. 4 taking down & s&f ms pipe erw steel including specials, nominal 150 mm dia as per is 3589 (1981) thickness 5.4 mm. 5 taking down & supply, laying and jointing for the 100 mm bore on floor/wall, galvanized steel tubing medium grade including isi marked gi fittings, including cutting to reducing length, screwing and connecting with existing line including fix existing connection with required size of tee or ms clamp complete all as specified and directed 6 taking down & supply, laying and jointing for the 80 mm bore on floor/wall, galvanized steel tubing medium grade including isi marked gi fittings, including cutting to reducing length, screwing and connecting with existing line including fix existing connection with required size of tee or ms clamp complete all as specified and directed. 7 s&f in replacement 200 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 8 s&f in replacement 150 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 9 s&f in replacement 100 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 10 s&f in replacement 80 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 11 m&l for rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 complete all as specified and directed. 12 excavation with the help of jcb and labour charges.
Tender For inviting rates for construction material supply for financial year 2025-26 - inviting rates for construction material supply for financial year 2025-26, boulder with spreading 0.75 to 20 c.m., fata with spreading rubble stone, soft murrom with spreading, hard murrom with spreading, bajra with spreading, course sand sand, fine sand barman sand, crusher stone duststone dust, 06 mm metal crushed. metal, 12 mm metal crushed. metal, 20 mm metal crushed. metal, 40 mm metal crushed. metal, 90 mm metal crushed. metal, flag stone 50 mm to 100 mm thick flag stone, flag stone 150 mm to 200 mm thick dasa, bricks (fly ash)8 x 4 x 4, bricks (local)9 x 4 x 3, half round r.c.c. pipe150mm dian.p.-2, half round r.c.c. pipe250 mm dian.p.-2, half round r.c.c. pipe300 mm dian.p.-2, half round r.c.c. pipe450 mm dian.p.-2, r.c.c. hume pipe300 mm dian.p.-3, r.c.c. hume pipe450 mm dian.p.-3, r.c.c. hume pipe600 mm dian.p.-3, r.c.c. hume pipe1000 mm dian.p.-3, r.c.c. hume pipe1200 mm dian.p.-3, r.c.c. cement pole2.40 m hight, r.c.c. cement pole3.0 m hight, barbed wire steel9.38 k.g. per 100r. m., wire mesh (steel)50x50 mm strengthing 4mm with nut bolt baser, angle iron all size mild steel, steel bar all size up to 25 mmmild & torsteel, winding wire, stainless steel febrication work with fixing labour charge, steel door & windows with all fittingsangel iron 30x30x5 mm flat iron 25x5 mm sheet 18 gauge, collapsible shutter with all fitting (steel), iron chamber/drain grill (complete spot fitting with labour), corrogated g.i. sheet0.63 mm0.63 mm, cement p.p.c. isi markisi mark 50kg beg, cement o.p.c. isi markisi mark 50kg beg, centring shutering with fitting and cartling below plinth level, centring/shutring with fitting & cartingabove plinth level, putty double coat with finishinglabour, roller machine with diesel & operetor, 16 to 18 mm thik plan white marble/green marble/zebra black marble/red marble, 25mm thick kota stone, 16 to 18 mm thick granite stone of any colour and shade, vetrified tiles60 x 60 cm 10mm thick 15:15622, glazed tiles300 x 300 mm 10 mm thick 15:15622, tiles / marble fitting labour charge, pvc floor carpet, w.c. 580 x 440 mm with footrest & p-trap with fittingodisa petarn, w.c. european type with fittingisi marked white solid plastic seat and lideuropean type, w.c. european type with fittingisi marked black solid plastic seat and lideuropean type, chequr tiles with fitting18 to 20mm thick ordnory cement, m.s. tube steel frame febrication work including all fitting labour charge, m.s. angle steel frame febrication work including all fitting labour charge, providing and laying cement concrete m20 grade work with required & equipmentlabour, aluminium fram work complete (glass/acp sheet/grill), hydra machine, poclain machine, water proofing treatment on roofs of slab by cement slurry mixed with water proofing compound complete, wall painting with plastic emulsion paint of approved paint, removing white or colour wash by scrapping and sand papering complete, distempring with oil bound distamper water proof paint complete, repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq mm including cutting the patches in propper shape, providing & fixing granite bhumipujan / lokarpan patthar with photo and writing work complete, providing and fixing on wall wallpaper complete, providing and fixing 12 mm toughened glass with accessories labour fitting complete, providing ply 19 mm thick, providing and fixing mica sheet complete, providing carpentar for furniture work, providing and fixing 60 mm thick paver block 30 n/sqmm, brick masonary work with open bhatta complete, statue colour paint complete, water proofing treatment on roofs of slab by asian paint, indigo, etc with water proofing compound 3 layer with crakseal, putty, labuar complete, pvc pipe 3 inch dia 4kg/cm2, marble chips flooring completed work with material labour, pvc pipe 3 inch dia 4kg/cm2 elvo
Tender For state scheme (nabard) /25-26/tikari /01 - 1) name of work: construction of high level rcc bridge over morahar river in between mahiyarpur to kurmawaan, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diasmeter all complete job as per specifiactions and direction of e/l, providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 .all complete job as per design upto 5 m height, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications. elastomeric bearing & pad, providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :--furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach s
Tender For state scheme (nabard)/25-26/jhanjharpur/01 - 1) construction of hl rcc bridge in karhara to malleh road over bhutia balan river-ch-2.10 km, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diameter. all complete job as per specifications and direction of e/i., providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m-30 mechanically mixed concrete in sub structure with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design upto 5 m hieght, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :-- furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach slab:-- reinforced cement concrete approach slab including
Tender For state scheme(nabard)/25-26/kishanganj-2/01 - construction of rcc h.l. bridge in malgachh to lat at ch.-0.600 km., h.l. bridge work, foundation, excavation for structures, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material., i) upto 3m depth, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., ii. pcc grade m-15 (levelling course for pile cap), r.c.c. grade m 30 in pile foundation complete as per dwg & tech specification., pile cap in rcc m-30 (using batching plant, transit mixer and concrete pump), bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., ii. 1200 mm dia (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, providing steel liner 10 mm thick for curbs and 6mm thick for steining of wells including fabricating and setting out as per detailed drawing, carrying out load test on any pile as per standard procedure laid down in the is:2911 specification including construction of test cap, dismantling the cap after test and cleaning the site and maintaining complete records of load, a) initial load test on test pile for 2.5 times the design load specified in drawings, 1.2 m dia pile, b) routine pile load test on pile for 1.5 times the design load specified in drawings, 1.2 m dia pile (2% of piles in total)., c) horizontal pile load test on pile for 1.5 times the design load specified in drawings, 1.2 m dia pile (2% of piles in total) ., substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specification, i) upto 5m height (using batching plant, transit mixer and concrete pump), ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), r.c.c. grade m-35 in substructure complete as per dwg & tech specification, ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8, i) sandy material, providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8, superstructure, providing and laying reinforced cement concrete in superstructure complete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5, ii. rcc m-30 (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in superstructrue complete as per drawings and technical sp
Tender For supply of red or , filling in plinth and floors with contractors material or brought from outside and approved by engineer incharge , providing and fixing country cut teak wood double or single leaf second class fully panelled door shutter , providing and fixing partitions made up of cctw frame of size 75 mm x 50 mm at 60 cm , library area table providing and fixing of free standing table at 1350lx750dx 750ht , providing and arrangemnt of mid back, normal syncro mechanism , fixed armrest , gaslift for seat height adjustment, standard 5 prong or nylon base with leather upholstery , free standing table at 1500lx600dx750ht providing and fixing table of size 1500 x 600 x 750 mm. , toughened glass 12 mm , conference table at 3600lx1400dx750ht providing and fixing of main table made up of 18plus18mm thick mdf top with pvc membrane finish and waterfall edge profile. , providing and arrangemnt of high back, synchronized mechanism with multiple locking, adjustable armrest, , supplying and fixing samsung led backlit lcd 55 3840x2160 uhd smart tv,tizen os mount type both table , providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour , providing and fixing rollar blinds ami make or approved make and shade of 38mm round aluminium channel with blackout fabric , providing and laying antiskid ceramic tiles of approved quality of size 30 cm x 30 cm , providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding i.s. for dado and skirting in required position , providing and fixing on walls or ceiling or floor 15 mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion , providing and fixing on walls or ceiling or floor 25 mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion , providing and fixing on walls or ceiling or floor 40 mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion , providing and fixing c.p. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange , providing and fixing 450mm x 550mm size superior type belgium mirror with 16mm dia. nickel plated towel rod , providing and fixing 100 mm dia stabiliser pipe or p.v.c. soil vent or waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps , providing and fixing white european type wall hung pan, of size 350mm x 355mm x 570 mm concealed flush tank with floor mounting frame , providing and constructing brick masonry inspection chamber 90cm x 45cm x 90cm , providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber , sliding window 3 track 2 glass shutter plus 1 flymesh of approved make with dgu, providing and fixing of sliding , carpenter i class skilled , providing and fixing table top white wash basin of size 120x635x405mm rubber plugs and brass chain
Tender For renovation of labs and toilets in aecs 1 in senior secondary and primary section at jaduguda - demolishing cement concrete , dismantling tile work in floors and roofs , dismantling of flushing cistern , dismantling doors, windows and clerestory windows , providing and laying plain cement concrete , providing and laying in position reinforced cement concrete work , providing and laying steel reinforcement for r.c.c. work , providing and fixing centering and shuttering , providing 15 mm thick cement plaster , providing and fixing ist quality ceramic glazed wall tiles , providing and laying vitrified tiles in different sizes , providing and applying two coats of white washing , providing and applying one coat of cement primer , providing and applying wall painting with acrylic emulsion paint , supplying and laying two or more coats painting with synthetic enamel paint , providing and fixing factory made isi marked steel glazed doors ,windows and ventilators , providing and fixing 35mm thick isi marked flush door shutters , providing and fixing isi marked oxidised m.s. handles , providing and fixing oxidised m.s. casement stays , providing and fixing water closet squatting pan , providing and fixing white vitreous china pedestal type water closet , providing and fixing isi marked oxidised m.s. tower bolt , providing and fixing glass panes , white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps. , white vitreous china wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer , providing and fixing 15 mm nominal bore c.p brass angle valve for basin mixer and geyser points , providing and fixing c.p. brass stop cock , providing and fixing c.p. brass bib cock , providing and fixing 600x450mm bevelled edge mirror of superior glass , providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats , providing and fixing 600x120x5 mm glass shelf with edges round off , providing and fixing c.p. brass toilet paper holder , providing and fixing c.p. brass shower rose with 15 or 20mm inlet , providing and fixing one piece construction white vitreous china squatting plate , providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin , 15 mm dia nominal bore , 20 mm dia nominal bore , 25 mm dia nominal bore , 75mm dia sand cast iron s and s pipe , 100 mm dia sand cast iron s and s pipe , half brick masonry with common burnt clay , providing and fixing 18 mm thick granite of any size,colour and shade , providing and fixing 10 mm thick acid and or alkali resistant tiles , providing and fixing 25mm thick cup board shutter isi marked , providing and fixing 15 mm nominal bore c.p. brass long body bib cock , providing and fixing white vitreous china laboratory sink , structural steel work in single section, fixed with or without connecting plate