Get complete information related to latest Pipes Fitting Item Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pipes Fitting Item Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pipes Fitting Item Tenders.
Tender For ttps mechii ahp unit iv v bah eco and aph break down maintenance of hdpe pipes of various size from 32 mm od to 450m welding of punctured joint new joints dismantling and reerection of the hdpe pipe of old new and rubber lining of ms pipe of vari
Tender For amtc. of ephs in sector 10 ue kurukshetra providing and laying of di pipe 150mm di specials and cid joints complete in all respect and all other works contingent thereto
Tender For providing and fixing of open gym equipment in various parks of sector 26 , ward no 18, panchkula. - works details, air walker: providing, designing and fixing of air-walker of size 100 550 1480mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. base plate cover shall be made up of virgin lldpe plastic by rotational moulding with minimum 4.00mm thickness u v resistant and colour as approved by engineer-in charge. high quality grip rubber should be used on handles. foothold shall be made of nylon alloy with rounded edge to prevent impact and injury. maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by engineer in charge. equipment to be fitted with inbuilt limiters. the equipment should be fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc., horse rider station: providing, designing and fixing of horse rider station each of size 1000 x 600 1100 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. all welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zine primer paint to be applied at all welding points prior to finishing. padals shall be made up nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly.bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to be fitted within built limiters to prevent unwanted movements. all open ends of pipe to be coloured by gi/lldpe caps for user safety. the equipment lope fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc., leg press: providing, designing and fixing of stair stepper in a combinationof pair and a single step of size 2000 x 550 x 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick.all welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber at top end. padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly.bearing used shall be maintenance free, duly oiled sealed and
Tender For (2nd call) construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities & staging 16 mt. including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber &providing, laying, jointing, interconnection of 90mm dia, 75 mm dia to 63 mm hdpe pe-100 , pn-6 pipe & …. mm dia upvc class 6 kg/sqcm with suitable joints & 65 mm dia gi pipe, valve specials and all fittings including all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity single phase, 50 hz, 220v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe, ss /nylon wirer opeand connection cable including verification of tubewell yield& electric connection from cseb, construction of brick masonry switch room of size 1.2*1.2*2.1 mtr ,construction of boundary wall around the over head tank, installation of 01 no. electro chlorinator , construction of chlorinator room of size 2.4*2.4*3.0 mtr , providing functional household tap connection(f.h.t.c) in individual households and government instiution etc. complete with trial run operation & maintanance for 06 months under single village of piped water supply scheme under jal jeevan mission for village purantarai block dantewada, district – dantewada
Tender For (2nd call) construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities & staging 16 mt. including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber &providing, laying, jointing, interconnection of 90mm dia, 75 mm dia to 63 mm hdpe pe-100 , pn-6 pipe & …. mm dia upvc class 6 kg/sqcm with suitable joints & 65 mm dia gi pipe, valve specials and all fittings including all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity single phase, 50 hz, 220v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe, ss /nylon wirer opeand connection cable including verification of tubewell yield& electric connection from cseb, construction of brick masonry switch room of size 1.2*1.2*2.1 mtr ,construction of boundary wall around the over head tank, installation of 01 no. electro chlorinator , construction of chlorinator room of size 2.4*2.4*3.0 mtr , providing functional household tap connection(f.h.t.c) in individual households and government instiution etc. complete with trial run operation & maintanance for 06 months under single village of piped water supply scheme under jal jeevan mission for village badegodre block dantewada, district – dantewada
Tender For corrigendum : supply of replacement of lt incoming panels at various locations and cable termination d d - room panel-2 as per technical spec and sow. , supply of gas operator room panel-3 as per technical spec and sow. , install, replacement, testing and commissioning of gas operator room panel-3 as per technical spec and sow. , supply of 3. 5c x 400 sq. mm aluminum cable. ss4 to gas operator room as per technical spec and sow. , laying, fixing, testing and commissioning of 3. 5c x 400 sq. mm aluminum cable. ss4 to gas operator room as per technical spec and sow. , supply of 3. 5cx 70 sq. mm aluminum cable. ss4 to fire service dept. as per technical spec and sow. , laying, fixing, testing and commissioning of 3. 5cx 70 sq. mm aluminum cable. ss4 to fire service dept. as per technical spec and sow. , supply of 3. 5c x 25 sq. mm cable. pump house 1 to pump house operator room as per technical spec and sow. , laying, fixing, testing and commissioning of 3. 5c x 25 sq. mm cable. pump house 1 to pump house operator room as per technical spec and sow. , supply part for end termination. as per technical spec and sow. , service part for end termination. as per technical spec and sow. , supply part for new earthings with 75mm ci cast iron pipe and gi flat as per is standards 3043 and as per technical spec and sow , service part for new earthings with 75mm ci cast iron pipe and gi flat as per is standards 3043 and as per technical spec and sow , supply of gi flat 25 x 6mm necessary joints with nut and bolts from earth pit to panel boards. as per technical spec and sow. , laying of gi flat 25 x 6mm necessary joints with nut and bolts from earth pit to panel boards. as per technical spec and sow. , civil works - breaking of existing concrete and excavate the cable trench up to 60cm depth provide sand 45mm thick lay the3. 5 core 400sq. mm lt 1. 1kv ss4-gas operator room , civil works - breaking of existing black top road and excavate the cable trench up to 60 cm depth provide sand 45mm thick lay the 3. 5 core 70sq. mm lt. ss4 to fire service dept. , a. foundations for lt panels at all locations, b. creation of power room for lt panels in gas operator room with al partition
Tender For on risk & cost piped water supply scheme for village- gowardhanpur (patelpara) ,gowardhanpur(khaspara,loharpara, ,gowardhanpur(barkirka) block- wadrafnagar district – balrampur(c.g.)construction, testing and commissioning of r.c.c. elevated service reservoir of 00 kl capacities – 00 no. & staging 12 mtr& staging 12 mtr {steel structure 12 m height & 10 kl (5000l x 2no.) – 5 no. and steel structure 09 m height & 10 kl (5000l x 2no.)- 00no.} pe tank & elevated service reservoirs of rcc staging and hdpe slim tank of capacity 5000 ltr of 00 no. 9 mtr staging (with switch room of size 1.8mx1.8mx3m) and 10000 ltr of 00 no. 12 mtr staging.including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber.providing, laying, jointing, interconnection, testing and commissioning of rising main upvc class 10 kg/sqcm 90 mm dia 00 m & hdpe 75mm dia 00 m & 63 mm dia 990 m., distribution upvc class 6kg/sqcm 90mm dia. 00 m., 110 mm dia. 00 m., 140 mm dia. 00 m. 160 mm dia. 00 m.& distribution hdpe class 6kg/sqcm 63 mm dia. 5438 m., 75 mm dia. 1426m.with suitable joints gi pipe, valve, specials and all fittings including all allied civil works, supplying & installation of energy taging n five star bee rating isi marked required capacity single phase / three phase, 50 hz, 220v,, deep well submersible pump stainless steel body, suitable for 4”/6” tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications butexcludingpipe,ss/nylonwireropeandconnection cable including verification of tubewell yield& electric connection from cspdcl, construction of brick masonry switch room, construction of boundary wall around the over head tank, installation of electro chlorinator , construction of chlorinator room of providing functional household tap connection (f.h.t.c. 164 ) in individual households and government instiution etc. complete with trial run of 03 months after that o&m of 06 months under piped water villege gowardhanpur (patelpara) ,gowardhanpur(khaspara,loharpara, ,gowardhanpur(barkirka) block- wadrafnagar district – balrampur(c.g.)
Tender For providing, laying and jointing socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (200 mm dia di k-9 pipe) conforming to is8329/2000 with suitable rubber gasket (push on) joints as per is:5382/85 including testing of joint (laying conforming to is 12288 : (200 mm dia di k-9 pipes.) & balance work of old agreemented work (risk & cost of contractor)with latest amendment including valves & specials as per specification with materials including all allied civil works & trial run for three month under charama augmentation water supply scheme.
Tender For bid to ras bid to ras bid to ras bid to ras corrigendum : supply of mechanical engg labs and workshop equipment d d - hydraulic system trainer kit , pneumatic system trainer kit , pelton wheel turbine test rig , francis turbine test rig , brake master cylinder , balancing machine , hydrometer , diesel fuel supply system , abs system trainer , transparent truck clutch structure model , electric vehicle kit , digital pyrometer , metallurgical microscope , spark test apparatus , standard prepared readymade samples or specimen with photographs , tool kit , ampere meter , pressure gauge , compound gauge , ring spanner set , thermometer with case , swaging tool set , voltmeter , valve key , leak detector to detect cfc and hfcs , thermostatic switch etc fitted on board , model of refrigeration cycle , digital anemometer , gas charging kit , model of open type refrigerant compressor , water cooler of 100 litre capacity , split ac test rig , actual cut section model of screw compressor , actual cut section model of rotary compressor , vapour absorption refrigeration test rig , vaccum pump , ice plant trainer , sling psychrometer , thermocouple , infrared thermometer , metallic cut section models of boiler mountings , model of nestler boiler , actual cut section model of four stroke single cylinder diesel engine , model of amal carburettor , digital vernier callipar , digital micrometer , height gauge , go-no go thread plug gauge , go-no go snap gauge , go-no go ring gauge , cylinder rollers and spherical balls , slip gauges set , vernier bevel protractor , surface plate , tool maker microscope , auto collimator with stand , angle deckor with set of angle gauges , profile projector , cylindrical bore gauge , screw thread micrometer , sine bar 125mm , sine bar 250 mm , feeler gauge , wire gauge , radius gauge , comparator stand , angle plate , mechanical comparator , clinometer , gear tooth vernier , metallic try square , meteric thread pitch gauge , electronic weighing machine , digital tachometer , simply supported beam apparatus , apparatus for determining centre of gravity of regular and irregular lamina , models of different wooden joints , models of screw threads , models nuts and bolts , models of locking devices , models of keys and cotter joints , models of riveted joints , models of bearing , models of pulleys , model of drilling jig , models of different types of gears , planner , milling machine conventional , power hacksaw , welding screen , gloves , oxygen regulator with spanner , motor coil winding machine , digital clip on meter , earth leakage circuit breaker, single phase , earth leakage circuit breaker, three phase , residual current circuit breaker, single phase , residual current circuit breaker, three phase , heat convector , desert cooler , electric oven , voltage stabilizer , digital energy meter , analog meggar , digital earth tester , plier , cutting plier 8 inch , leg vice 4 inch , round die handle , tap wrench- 5 by 16th of an inch to 1 inch , pipe vice , grinder , bench grinder 0.5 hp motor , scriber 8 inches , sheet steel wire gauge , circle cutting machine , edge folding machine , foot shear machine , rivet snap 0.25, 0.5, 0.75, 1 inch , rivet set 0.25, 0.5, 0.75, 1 inch , hand stake , funnel stake , round stake , taper stake , shovel , riddle , foundry bellow , silica sand , bentonite clay type , molasses , ladle , ladle holder , oil fired tilting type furnace , sand mix muller , moulding board //bid details 2 / 109
Tender For (4th call) construction, testing and commissioning of g.i. steel structure and pvc tank cap 10000 lt. and staging 9.00 m. - 02 nos & providing, laying, jointing, interconnection, testing and commissioning of 75 mm dia to 63 mm hdpe pe-100 , pn-6 pipe & …. mm dia upvc class 6 kg/sqcm with suitable joints & 65 mm dia gi pipe, valve specials and all fittings including all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity single phase, 50 hz, 220v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe, ss /nylon wirer opeand connection cable including verification of tubewell yield& electric connection from cseb, construction of brick masonry switch room of size 1.2*1.2*2.1 mtr ,construction of boundary wall around the over head tank, installation of 01 no. electro chlorinator , construction of chlorinator room of size 2.4*2.4*3.0 mtr , providing functional household tap connection(f.h.t.c) in individual households and government instiution etc. complete with trial run operation & maintanance for 06 months under single village of piped water supply scheme under jal jeevan mission for village dorriras block kuakonda, district – dantewada. .निविदा पुराने दर (p.h.e. sor (01.06.2020) पर आमंत्रित है