Latest piston cylinder Tenders | Government piston cylinder Tenders

CTN :45559703

16 Jul, 2026 NA

Ernakulam - Kerala

Tender For tender for supply of spring washer , rpm meter (tacho meter) , gasket , set of hoses , guard tube , v belt a-39 , screw hexagon , spring washer , spring dowel pin , valve spring , clamp , screw banjo (9411033404) , reducer , washer copper , washer copper , washer copper , washer injector , o ring , o ring , o ring , o ring , o ring , o ring , oil seal , gasket , cylinder liner , valve stem guide , washer thrust , tension roller assembly , intermediate flange , gasket shaped , shaped gasket , gasket shaped , gasket , shim , flexible pipe 800mm lg , cogged belt ax-40 , contl switch pr sa 1.5cm , paper insert oil centr fug , washer set , bush , s/w pump repair kit , pulley v belt , main bearing bush , injection pp drive compl. , l o filler neck fabricate , fuel filter , gasket 3 thermostat casng , rubber ring for he 8 shel , gasket , hose rubber , air inlet pipe , fresh water pump spares , o ring , washer , cylinderal pin , pipe connection , push rod sleeve , spring , flat seal ring , temp. transmitter , hex scre m10x30lg , screw m 12x60 , hexbolt m12x1.75x40 10.9c , m8 x 20 hexagon screw , hexagon screw m10x1.5x30-10.9c , screw , screw hexagon , hex srew m12x40 cl18.8 , stud , stud bolt , washer spring (srl.no.6&16) , spring washer , spring ring , spring washer , ring locking , ring locking , ball bearing , bearing ball 6204 , cap roto , clip hose , screw banjo (9411033404) , gasket-water pipe oilcool , washer copper , washer , o ring , o ring , o ring , o ring , ring round cord , seal oil , injector assy , filter disposable , mounting vibration damper (washer ) , safety valve l.o.f head , zinc anode , screw plug , piston assy w/o piston , cylinder liner , ring set , washer , bolt connecting rod , bush connecting rod , bush main bearing , piston cooling nozzle , gasket shaped , gasket , gasket shaped , gasket , gasket shaped , lub oil pipe , washer packing , ring rubber , hose 80x70 , exhaust junction , nest tubes v12 oilcooler , piece connecting , rotor cap , washer disc , flex pipe - f pump 450 mm , bolt main brg m18x2.5x165 , pipe clip , injector cmpl mico , set of high pressure pipe , banjo screw

CTN :45565907

23 Jun, 2026 NA

Vapi - Gujarat

Tender For supplying of materials and supplying and spreading of materials at various places of vapi municipal area. annual rate 2026-2027 - supplying of yellow earth, garden soil at site as directed., supplying of hard murram at site as directed., supplying of coarse clean sharp sand at site as directed., supplying of crushed stone aggregates, chippings etc. of disintegrated pieces, eletatrious and organic matter (for bitumen surface dressing etc.) and grading as per i.r.c.code., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii) 40 mm to 90 mm size metal, (iv)9 thick rubble, supplying bricks., supplying of granular sub base by providing coarse graded material, mixing by mix in place method with rotavator at omc, with grading material of 53 mm to 26.5 mm size @35 percent,26.5mm to 4.75 mm @ 45 percent and 2.36mm below @ 20 percent at site as directed., providing wet mix base course maximum 200 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, including cost of materials labour plant and equipment etc complete, construction of granular sub-base by providing coarse graded material(metal), spreading in uniform layer on prepared surface mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, etc, complete as directed by engineer in charge., providing and laying wet mix base course maximum 150 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, spreading into grade and camber with mechanical paver and consolidation with vibratory road roller including cost of material labour plant and equipment etc complete as directed by engineer in charge., supplying and spreading of following materials at site as directed by engineer in charge including rolling and consolidation with vibratory roller as directed by enigineer in charge., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii)40 mm to 90 mm size metal, (iv)9 thick rubble, supplying and spreading hard murram including rolling and consolidation with vibratory roller as directed by enigineer in charge., note:- all rate are required compulsory

CTN :45434015

18 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of motorized treadmil , camber curl and triceps , fst dual adjustable pulley , triangle colour rubber plates twenty eight oblique fifty mm per kg 2 point 5 kg five kg comma 7 point five kg comma ten kg comma 15 kg comma 20 kg and 25 kg , zig zag olympic rod , plastic collar , rubber flooring tile black , angled leg press , spin bike , prone leg curl or leg extension , adjustable bench , pull down or low row , shoulder press or chest press , back extension

CTN :45473048

15 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of leaf spring (material as per is:3431-1982 or en45) for tongue assemble of uniquemake surface traverser capacity -80 ton .size-section-80mm x 13mm, camber-approx 58 mm, effective length-1065 mm (approx) with material test certificate from nabl/govt. approved test lab. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45411616

12 Jun, 2026 NA

Kutch - Gujarat

Tender For supply of miscellaneous items for imd section in kltps - flexible hose pipe: i.d.: 3/4" , sae 100 r6 rubber flexible hose pipe, i.d.: 3/4" with length: 1 mtr. both end hose connection type: crimped 3/4" bsp(f) swivel high pressure fitting , , ups 600 va, i/p 230v ac. , , phoenix contact make fuse tb model: tb - 4 hesi (5x20) ei part no.: 3075773 , , phoenix contact make fuse tb model: tb - 4 hesi (5x20) ei part no.: 3075773 , , phoenix make terminal, part no.: pxc.3210156, model: pt 2.5- mt. , , phoenix contact make relay module model: rif-0 rpt-24dc/1 part no.: 2903361 , , double acting piston cylinder with reed switch bore diameter: 63mm stroke length: 300 mm , , double acting piston cylinder with reed switch bore diameter: 40mm stroke length: 300 mm , , seal kit for doble acting magnetic power cylinder having bore of 63mm and stroke of 300mm , , seal kit for double acting magnetic power cylinder having bore of 40mm and stroke of 300mm

CTN :45373463

09 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For supply of shocker assy complete , ball joint , bush silent block assy lla , bush silent block upper control arm , bush silent block upper lla front , lower arm assy , solenoid switch assy , sprocket comp cam chain , mounting eng front , ball joint upper control arm , camber cam nut , nut hex , stabiler assy rod , bearing , door lock front rh , pipe assy

Central Government/Public Sector

CTN :45365852

20 Jun, 2026 40.00 Lacs

Kalimpong - West Bengal

Tender For repair to certain roads including road furniture at kalimpong mil stn under ge 867 ews - m&l for repairs to pot holes of depth exceeding 30 mm thick, area not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads , paths etc cutting around edges to at least 25mm in depth, and making good by applying tack coat with paving bitumen grade 10 pack primer (vg-10) @ 5kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder with paving bitumen grade 30 pack (vg-30) @9.8 kg per 10 sqm blinded with 0.09 cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm, complete all as specified and directed., m&l for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with bitumen primer using paving bitumen grade 10 pack (vg-10) @ 5kg per 10 sqm, complete all as specified and directed., m&l for premix bituminous macadam using paving bitumen of grade 30 pack (vg-30) @ 4% by weight of total mix laid / rolled and compacted to required gradient and camber with 8 to12 tonne power road roller and rolled to a uniform smooth surface (consolidated thickness 75 mm or less), complete all as specified and as directed., m&l for 40 mm thick consolidated thickness bituminous premixed carpet with 0.54 cu.m per 10 sqm of stone chipping and mixed with 29.20 kg per 10 sqm of binder using paving bitumen grade 30 pack (vg-30) laid and rolled with 8 to 12 tonne power road roller and compacted to required camber and gradient, complete all as specified and directed., m&l for liquid seal coat by applying paving bitumen of grade 30 (vg-30) @ 9.8 kg per 10 sqm blinded with 6.3 mm size stone chipping @ 0.09 cum per 10 sqm and rolled to a uniformed smooth surface by 8 to 12 tonne power road roller, complete all as specified and directed., providing and lying mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29 using approved coarse aggregates, fine aggregates filler materials and bitumen, prepared by using mastic cooker including cost and carriage of all ingredients, cost of heating aggregates and binder mixing in specified proportions conforming to approved job mix formula and laid to required level and slope after cleaning the surface, compacting, sealing the construction joints and surface finishing conforming to specifications including providing antiskid surface with bitumen pre-coated fine arraigned hard stone chipping of 13.20mm nominal size at the rate of 0.005 cum per 10 sqm and at an approximate spacing of 10 cm centre to centre in both directions, pressed into surface when the temperature of surfaces not less than 200c, protruding 1 mm to 4mm over mastic surface including the hire charges of all tools and plants and machinery, pay of operators, cost of fuel and lubricants and quality control all complete as per clause 516 of specification for road and bridge works of morth (5th revision). 25mm thick (pakur) vg-30 (po, 10/20 (p), complete all as specified and directed, supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed., supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with pama striplens reflector of model no. da 972.0 fixed with and incl ms stud of suitable size as per manufactures instructions and all as specified and directed., m&l for applying ther

Central Government/Public Sector

CTN :45365796

27 Jun, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi

Central Government And Public Sector

CTN :45364730

29 Jun, 2026 NA

Gandhidham - Gujarat

Tender For providing quarry material& laying & spreding for kandla & veera area -eoi - providing primary rock of 0.1 to 0.5t for road work/ground including cost of quarrying, royalty, loading, unloading, transportation and spreading in layers from existing ground to required level, levelling, dressing side slopes etc., complete with all labour and materials complete including settlement etc., as directed by the engineer in charge. level ( 200 to 300 mm layers) , supplying and stacking of quarry spall /granular material for embankment of approach roads/plot with including cost of excavation, royalty, loading, unloading transportation complete with all labour and materials or as directed by engineer in charg , laying, spreading, compacting and shifting of quarry spalls material with loading, unloading and transporting. the material shall be spread in uniform thickness and compacted in layers using vibratory rollers of 8-10 capacity with watering to achieve proper grade and camber. the work shall include consolidation to meet specified compaction values and surface accuracy, complete in all respects as directed by the eic( 200 mm to 300 mm layer wise)

State Government

CTN :45299485

02 Jun, 2026 NA

Kutch - Gujarat

Tender For supply of miscellaneous instrumentation and mechanical items for imd section including flexible hose pipes , sae rubber flexible hose pipes, ups units , phoenix contact fuse terminal blocks , phoenix terminal blocks, phoenix contact relay modules , double acting piston cylinders with reed switches , and complete seal kits for magnetic power cylinders

Piston Cylinder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government