Latest piston liner Tenders | Government piston liner Tenders

CTN :40821460

08 Jul, 2025 NA

Multi City - Rajasthan

Tender For requirement of safety, rescue and security items for ssctps fy 2025-26, suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap, gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch), barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5, chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160, acid/ alkali proof gloves having size of 18 inch with palm m, normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton, fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics, safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white, safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green, impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003, foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592, carry sheet ( stretcher)l x b: 212 x 75 cm with self weight 1 kg , load limit 159 kg , lift type: horizontal, wind indicator made of light weight pu coated nylon material. double stitch at all joints. plastic eyelets gives anticorrosion proper ties. the complete wind sock comes with a polymer packing. 2 dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe., ear plugs corded epsav-570, nose/ dust mask rpsav -p2, flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164, vapour respirator with head stripes to accommodate twin cartridges with exhalation valve, safety net consisting of pp rope dia: 4mm, mesh size: 100 mm,outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr, ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a), heat shield hand gloves made of normal and tannedsplit leather of reddish brown colour. insulating thermalbarrier as inner layer gives heat protection upto 250 degrees.thumb re inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344, insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991, electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991, hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350 c temperature.it should be atira tested for 250 c splash, tested to iso 5025,9151,6942,9185 and en 1875-3, chemical splash goggles with indirect ventilation, protect against splash and a hard coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003, chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003, elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv, chemiflex latex gloves, length-300 mm, en size- l coating material- natur

CTN :40808350

04 Jul, 2025 13.22 Lacs

Ganganagar - Rajasthan

Tender For requirement of safety, rescue & security items for ssctps fy 2025-26,suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap , gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch) , barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5 , chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160 , acid/ alkali proof gloves having size of 18 inch with palm m , normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton , fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics , safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white , safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green , impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003 , foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592 , carry sheet (stretcher) l x b: 212 x 75 cm with self weight 1 kg, load limit 159 kg, lift type: horizontal , wind indicator made of light weight pu coated nylon material. double stitch at all joints. , plastic eyelets gives anticorrosion proper-ties. the complete wind sock comes with a polymer packing. 2" dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe. , ear plugs corded epsav-570 , nose/ dust mask rpsav-p2 , flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164 , vapour respirator with head stripes to accommodate twin cartridges with exhalation valve , safety net consisting of pp rope dia: 4mm, mesh size: 100 mm, outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr , ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a) , heat shield hand gloves made of normal and tannedsplit leather of reddish-brown colour. , insulating thermalbarrier as inner layer gives heat protection upto 250 degrees. thumb re-inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344 , insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991 , electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991 , hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350c temperature.it should be atira tested for 250c splash, tested to iso 5025,9151,6942,9185 and en 1875-3 , chemical splash goggles with indirect ventilation, protect against splash and a hard-coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003 , chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003 , elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv , chemiflex latex gloves, length-300 mm, en si

CTN :40780975

10 Jul, 2025 NA

Multi City - Multi State

Tender For supply of high viscous nylon-66 insulating liner (t-6938). [ warranty period: 30 months after the dat e of delivery ]

CTN :40506872

21 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras purchase of spares - weasher 3 by 8 inch bsf , o ring , nut brush terminal(os sl no-187) , bearing cap bolt(os sl no-7) , spnr de 14x15mm(ces cps260) , bolt self lock 1.5 inch f by whsg , hexagon socket screw (os sl no-142) , stud for silencer connection , set screw for front cover(os sl no-157) , nut cyl head , o ring , dowel pin (os sl no-133) , joint (os sl no-140) , joint (os sl no-111) , nut for air cleaner mtg stud (os sl no-149) , spl screw 5 by 16 bsf , o ring for rocker bracket , stud 5 by 16 inch x 1.25 inch long , joint , bearing bush de , joint for transfer block (os sl no-122) , joint (os sl no- 128) , bolt crankshaft to adaptor , special simmonds nut , spring , stud for injector pipe clamp , locking plate (os sl no-16) , joint (os sl no-103) , shim 0.0003 feet thick (os sl no-131) , shim 0.0005 feet thick(os sl no-132) , gasket(os sl no-188) , hose 9 by 16-0.5mtr , gasket , joint (os sl no-141) , o ring for delivery pipe flange , bolt (ms sl no-117) , joint for air clearance base (os sl no-150) , insulating washer (os sl no-190) , rubber faced washer for cyl head cover (os sl no-1 , stud cyl head to ex manifold (os sl no-151) , valve cap(p-21) , timing pointer (os sl no-58) , bolt fly wheel (p-57) , abutment washer , rubber shroud (os sl no-137) , split pin (os sl no-207) , jublee clip (os sl no-255) , exhaust manifold gasket (os sl no-153) , gasket cover cylinder(chicago260) , joint timing case to back plate , circlip (os sl no-202) , plug (p-37) , joint back plate to crank case , plier insulated 150mm(ces-34) , joint for inlet manifold (os sl no-148) , joint for rear cover (os sl no-163) , o ring (p-11) , o ring (os sl no-121) , joint for front cover (os sl no-159) , locator pos terminal (os sl no-191) , ferrule , connection piece , gasket for discharge pipe , gasket for discharge pipe , grease cap 3 by 8 bsf(chicago) , oil seal (os sl no-129) , insulator washer (os sl no-192) , filer element assy , joint for side cover rh rear (os sl no-162) , brush spring , spring inner , hammer engineer ballpein 0.5 kg , brush(a l page-109) , hose 9 by 16-1.8mtr , bearing bush , o ring (os sl no-96) , felt pad (os sl no-224) , banjo bolt , tab washer , joint crankshaft seal hsg to f by w hsg (os sl no-66) , insulator (os sl no-186) , tee coonection(p-13) , hose 9 by 16-2mtr , brush connector positive , valve spring , valve , l bracket (p-55) , dowel pin(dia14x30)(ces-33) , joint for side cover rear to c by c(os sl no-161) , centre tube (os sl no-155) , bolt , main bearing cap (p-7) , bush assembly , ceramic insert (os sl no-136) , joint (ms sl no-16) , heatsink assy positive , bushing body o pump (p-7) , s assy of pipe feed pump to filter (os sl no-102) , covering plate (os sl no-70) , oil seal , oil seal burton wood(ctlg p-23) , oil relief valve(ms sl no-03) , anti vibration mount(p-25) , set screw (os sl no-50) , oil filter cap (os sl no-167) , s assy of pipe feed pump to filter (os sl no-104) , tee connection(p-13) , s a of pipe filter to fuel pump(os sl no-105) , spring (pinion)(os sl no-212) , fan belt (oem) , auxiliary diode , insulator (os sl no-195) , kit thrust washer(os sl no-4) , plug(p-29) , water pump seal (os sl no-135) , o ring (p-29) , lead assy y positive (os sl no-189) , o ring(p-3) , s a of pipe oil , c e bearing (os sl no-231) , regulator , flexible hose(p-29) , roller bearing hofman (os sl no-83) , ball bearing hoffman (os sl no-84) , o ring(p-3) , front cover (os sl no-156) , taper roller bearing (os sl no-130) , heat sink assy aux (os sl no-197) , driving shaft (os sl no-134) , joint housing to back plate(ms sl no-67) , bush assembling kit(p-61) , element filter , filter service indicator(chicago p-20) , liner cyl s by s outer dia y (p-7) , de bearing , p2p controller service kit(os em r655 dt 01.02.19) , bearing sre , hose filter to fuel pump , rotor assy(a l page-99) , ring set(p-15) , cable(p-11) , kit main bearing(chicago) , oil by pass valve , s a of fan 19.5 in dia 6 blade (os sl no-12

CTN :40717348

05 Jul, 2025 NA

Kupwara - Jammu And Kashmir

Tender For supply of piston ring set , starter motor armature , piston assembly , connecting rod , rotor assy , piston liner assy , engine packing kit

Central Government / Public Sector

CTN :40761724

15 Jul, 2025 NA

Kazipet - Telangana

Tender For rate contract for manufacture and supply of high viscous nylon-66 insulating liner (hv n liner) to rdso drg. no. t-8751,alt.3 suitable to 60 kg (uic)/60e1 rails for use with wider base psc s leepers with latest alterations, if any and confirming to irs specification irs:t-44-2023, with latest am endment, if any as on tod. ]

Central Government And Public Sector

CTN :40746946

17 Jul, 2025 NA

Bongaigaon - Assam

Tender For 1-in-12 bg 60 kg weldable cms crossing (wcmsc) on psc sleepers in accordance with rd sos standard drawing no. t-6412 including supply of 6mm thick grooved rubber sole plates (drawing no. rdso/t-6204 to rdso/t-6211, rdso/t-6843 to rdso/t-6846), excluding standard fish plates, fish bolts and nuts, e.r clips, insulating liner etc.with latest alteration, if any (the term latest alterations wherever used will mean the alteration up to 5 days before the actual date of opening of tender.). [ warranty period: 30 months after the date of delivery ]

CTN :40700026

15 Jul, 2025 NA

Varanasi - Uttar Pradesh

Tender For manufacturing & supply of 60 kg high viscous nylon-66 insulating liner (hvn liner) to rdso drg. no. t- 3706 with alteration no. 8 or latest and conforming to irs specification no. t-44-2023 (second r evision) or latest corrigendum issued before 15 days from the tender opening date. [ warranty period: 3 0 months after the date of delivery ]

CTN :40700025

15 Jul, 2025 NA

Gonda - Uttar Pradesh

Tender For manufacturing & supply of high viscous nylon-66 insulating liner (hvn liner) to rdso drg. n o. t- 3707 & 3708 with alteration no. 8 or latest and conforming to irs specification no. t-44-2023 (second revision) or latest issued before 15 days from the tender opening date. [ warranty period: 30 months aft er the date of delivery ]

Central Government / Public Sector

CTN :40624572

08 Jul, 2025 NA

Kazipet - Telangana

Tender For manufacture and supply of 11200 mm o/r (curved) fan shaped switches for 1 in 16, t/ out for bg 60 kg (uic) on psc sleepers to rdso drg. no. t-5692 alt.4 with latest alteration if any upto the actual date of closing of tender conforming to irs specification: t-10-2025 with latest amendment , if any upto the actual date of closing of tender, with stock rails and all parts including check rails as li sted in the drawing t-5692 but excluding ncr grooved rubber sole plates, insulating liner, elastic rai l clip, plate screw, fish plates and fish bolts. ]

Piston Liner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government And Public Sector

Central Government / Public Sector