Latest pitch gauge Tenders | Government pitch gauge Tenders

Central Government/Public Sector

CTN :45702805

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no wc-07001fac/icf note : - 1 advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b.lot no. bpl/crws/26-27/cond. coach/15/0068 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45702806

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decoram, non-ferrous & restricted items will not be delivered) coach no 1-wc-910037 art/beml2-wc -920016 art/beml 3-wc-910036 art/rcf note : - advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b.lot no. bpl/crws/26-27/ cond. coach/15/0069 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. note: delivery will be made on actual nos basis.

Central Government/Public Sector

CTN :45702798

02 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - 98414501: cond. & u/s. electrical scrap consiting of inverter ,transformer for pre cooling, battery charger sorts and size, stabilizer, current regulators,ac/dc welding rectifier/plant,chokes, meters, capacitors, led lights/tube, vacuum cleaner, knob, torch lights of sorts and sizes, coach guidence parts, switches of various types, electrical parts, ballast, street lights, nugger, chokes, chargers, regulator, pre cooling switch,roof mounted electric loco ac cab,frequency controller, starter, fuse, terminals,timer relay, kwh meters, circuit board, amplifier, panel board, led light,socket,tube light holder, multi colour lamp, digital tempreature meter, chargeable lamp, soldering iron, tester, volt meter, various type of meters, insulation tester, megger,solar board and water heater,solar sets, analog starter,tlb instrument,different type of dlb instrument,boost charger, sms alert,holder, electric detector, ethernet card, relay panel, ups, smps atx, lan extender,port switch, media converters, optical fiber cable equipment, ethernet switch,ara terminal/fuse, recttifier,dc dc converter, earth electrod,vhm charger,head lamp, relay timer ,led lamp,led shunt routesolar panel,spd,spt, trasmitter,receiver,alarm system,smr ei, cab ac,pressure gauge, multimeter, heating elements, speaker, amplifier, lamp shades, speedometer,vcd,different type of relay,base assembly,pcb card,program switch,bl box,different type of ammeter,pedal switch,ups various,fl choke,single phase meter,mcb various amps,electronic timer switch,single phasing preventer, ballast off size,capacitors of various sizes,fan regulater, and such other similar electrical scrap as is where is condition. note: 1).if any non ferrous items found in loose conditon should be returned to the custodian,(2) pick and choose not permitted. (3) crane/jcb loading permitted.location: tree no.04 ,middle of scrap yard /ssd/ptj.

State Government

CTN :45697547

10 Jul, 2026 NA

Kotdwar - Uttarakhand

Tender For procurement of auto electrician and electronics trade equipments allen key set of 12 pieces, back probe tools, caliper inside, calipers outside, center punch, dividers, electrician screw driver, hammer ball peen, hands file, logic probe, pliers combination, screw driver, screw driver, scriber, spanner d.e. set of 12 pieces, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t- bar, ratchet and, steel rule 30 cm inch and metric, steel tool box with lock and, key (folding type), test light, wire cutter and stripper, ac alternator slip ring puller, adjustable spanner, air blow gun with, standard accessories, air impact wrench with, standard accessories, air ratchet with standard, accessories, allen key set of 12 pieces, ammeter, angle plate adjustable, angle plate size, anti theft device, auto electrical test bench, battery -charger, battery terminal cleaner tool, battery tester, belt tensioner gauge, blow lamp, caliper inside, calipers outside, car jet washer, car stereo, chisel, chisels cross cut, circlip pliers expanding and, contracting type, clamps c, clamps c, clamps c, cleaning tray, copper bit soldering iron, dc ohmmeter, depth micrometer, dial gauge type 1 gr. a, (complete with clamping devices, and stand), distributor -duel advance type,, reluctance type, dividers, drift punch copper, drill point angle gauge, drill twist, electric soldering iron 230 v 25, watts, electric testing screw driver, electrical horns ( different types ), engineer's square, executive auto electrical tool kit, feeler gauge 20 blades (metric), file flat, file, half round, file, square, file, square, file, triangular, files assorted sizes and types, including safe edge file (20 nos), flat file, flat file, glow plug tester, granite surface plate, grease gun, growler, hacksaw frame adjustable, hammer ball peen, hammer chipping 0, hammer copper, hammer mallet, hammer plastic, hand operated crimping tool (i), for crimping up to 4mm and, (ii) for crimping up to 10mm, hand reamers adjustable, hand shear universal, hand vice, high rate discharge tester (cell, tester), hollow punch set of seven, pieces, insulated screw driver, insulated screw driver, left cut snips, lifting jack screw type, magneto spanner set with 8, spanners, magnifying glass, marking out table, multimeter digital, multi-point fuel injection pump, oil can, oil stone, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, philips screw driver set of 5 pieces, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, portable electric drill machine, portable headlight aiming kit, prick punch, punch letter 4mm (number), scriber, scriber with scribing black, set of stock and dies - metric, soldering copper hatchet type, spanner clyburn, spanner d.e. set of 12 pieces, spanner t. flocks for screwing up, and up- screwing inaccessible, positions, spanner, adjustable, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t-bar, ratchet and, universal upto 32 mm set of 28, pieces with box, spark lighter, spark plug spanner, steel measuring tape, steel rule, steel rule, straight edge gauge, straight edge gauge, stud extractor set of 3, stud remover with socket handle, surface gauge with dial test, indicator plunger type i.e. 0.01 mm, tachometer (counting type), taps and dies complete sets (5, types), taps and wrenches - metric, telescope gauge, temperature gauge, tester sparking plug 'neon' type, thermostat, thread pitch gauge metric, bsw, timing lighter, universal puller for removing, pulleys, bearings, v' block, vernier caliper, vice grip pliers, voltmeter, wire gauge (metric), work bench, 4 point relays, 5 point relays, air bag simulator, air conditioned mpfi vehicle, with auto transmission and, air conditioning service unit (car), air conditioning trainer kit, alternator assembly used for lmv, arbor press hand operated 2, ton capacity, general installation/ machineries, cut section model of moc

State Government

CTN :45143851

06 Jul, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various precision measuring instruments for tmd at sikka tps. - insize-1118-150b digital vernier calipers, digital vernier calipers size - 0-300 mm mitutoyo make, vernier caliper "mitutoyo" make, size- 0- 300 mm, vernier caliper "mitutoyo" make, model 532-101 size- 0- 180 mm, vernier caliper "mitutoyo" make, model 532-101 size- 0- 280 mm, vernier dial 0.00 to 200 mm, dial vernier caliper: size: 300mm (l.c: 0.02mm/0.001) suitable to take inside, outside, depth and step precision measurements. dual reading scale (metric and inch). mfg. from hardened ss and satin finish., dial gauge: 0-5mm model no: 1044a, dial indicator plunger type with back lug suitable for magnetic base, height gauge etc. graduation: 0.01 mm, range: 0 mm - 5 mm, dial reading: 0-100, accuracy: 0.013 mm., extension rod, length 150 mm suitable for mitutoyo make dial indicator plunger, mitutoyo dial indicator 0.01mm to 10mm, dial gauge: 0-30 mm model no: 3052a-19, mitutoyo make dial gauge with magnetic stand: 0-10mm, magnetic stand order 70115, mitutoyo make magnetic stand,701, magnetic stand with flexible column, model:7012-10, magnetic stand model 7033 - 10, make mitutoyo, long stem 1 for mitutoyo make magnetic stand 7010, dia 12 mm bottom connector m8x1.25 length 300 mm, long stem 2for mitutoyo make magnetic stand 7010, dia 10 mm length 500 mm, insize telescopic inspection mirror size 32 mm, 360d rotation 500 mm long, adjustable ss handle, feeler guage 0.03 to 0.5mm (184-302s), make; - mitutoyo, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, feeler gauge: 0.01 - 1 mm, length - 300 mm (long leaf). 32 leaves: 0.01 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm., feeler gauge: 0.01 - 1 mm, length - 600 mm (long leaf). 32 leaves: 0.01 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm., measure tape 3 mtr long, measure tape 5 meter, measure tape 30 meter, freemans make measure tape 15 metre long, digital outside micrometer with large digital display. size: 0 - 25mm, resolution: 0.0001 mm., digital outside micrometer with large digital display. size: 25 - 50mm, resolution: 0.0001 mm., mitutoyo make outside micrometer, 0 to 25 mm, 102/217, outside micrometer size - 50-75 mm mitutoya make, outside micrometer size 75-100 mm, outside micrometer 0-150 model 104-135a, mitutoyo make insidemicrometer, range-25 to 50mm, model:141-105, inside micrometer range 50-500 mm lc-0.01mm, mitutoyo make depth micrometer, 00 to 150 mm, 129/116, mitutoyo make depth gauge, range 300 mm,530/119, bore guage 18-35 mm (511 - 701) make: - mitutoyo., bore guage 35-60 mm (511 - 701) make: - mitutoyo., digital bevel protector 150 mm (187-501), make: - mitutoyo, mitutoyo make thread pitch gauge up to 100mm, surface plate, granite as per is 8512-2:1990 size 600x600 mm with stand 755 mm

Central Government And Public Sector

CTN :45653040

30 Jun, 2026 NA

Bangalore - Karnataka

Tender For unified screw pitch gauge to make mitutoyo model no 188-111 or exactly similar in baker/starrett/accu. note: calibration/ test certificate from nabl shall be submitted along with the supply [ warranty period: 30 months after the date of delivery ] ]

CTN :45675374

09 Jul, 2026 NA

Multi City - Bihar

Tender For auction sale of others - 1 control terminal block 16 mm 03 nos. 2 hp/lp cut out 05 nos. 3 scrap scroll compressor 10 nos. 4 scrap blower motor, 1.5 hp, 1400 rpm with top 18 nos. 5 scrap condenser fan motor, 1 hp, 1400 rpm with top 18 nos. 6 ss welded round guard 03 nos. 7 dryer filter (1.5¿ solder type) 29 nos. 8 hartige ( coupler) connector 24 pin 46 nos. 9 hartige ( coupler) connector 16 pin 20 nos. 10 dumper actuator 5 nos. 11 male female plug and socket for dumper actuator 5 nos. 12 pressure transmitter ( 0-10 bar) 20 nos. 13 pressure transmitter ( 0-40 bar) 26 nos. 14 glass bulb cartridge 130 degree 59 nos. 15 scrap esti switch assembly with cartridge 9 nos. 16 air heater set consisting 400 watt ( 15 nos.) coil with insulated backelite sheet 3 nos. 17 scrap low pressure control switch (auto reset) 38 nos. 18 scrap high pressure control switch (auto reset) 50 nos. 19 scrap control pressure switch (auto reset) 24 nos. 20 expansion valve 22 nos. 21 hp gauge (0-40 bar) 13 no. 22 lp gauge (0-10 bar) 13 no. 23 set point generator switch 5 nos. 24 top cover (part-i inside) 4 nos. 25 hygrostat 35-100% 8 nos. 26 scrap compressor contactor -type ls-1 bk 00 dc 110 volt 44 nos. 27 scrap condenser motor contactor -type 1.54k10e dc 110 volt 37 nos. 28 scrap blower motor contactor -type 1.54k10b dc 110 volt 27 nos. 29 dc-dc converter for flapper motor, 110 v/24 v , 1.5 amp 3 nos. 30 bottom cover (part-i inside) 4 nos. 31 electronic controller (srmc-20) 5 nos. 32 top cover (part-ii inside) 4 nos. 33 multifunctional monitoring relay, 750 volt 33 nos. 34 scrap dc-dc converter , 110 v/24 v, 20 amp/1.5 amp 20 nos. 35 return filter, fresh air cassette filter 73 nos. 36 scrap bush bearing clutch plate, commutator, carbon brush holder including carbon 4 nos. 37 bottom cover (part-ii outside) 4 nos. 38 b-check kit for dg 14 set 39 solenoid switch of self-starter 2 nos. total ferrous - 958 kg total copper - 71 kg

Central Government/Public Sector

CTN :45635565

30 Jun, 2026 NA

Hubli - Karnataka

Tender For supply of thread pitch gauge set (q3)

Central Government/Public Sector

CTN :45637832

25 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot non ferrous scrap - 98200070 scrap released different items of copper alloys such as gun metal / brass/ bronze with or without major / minor ferrous / non ferrous attachements such as spring, splasher, handle, patti, fins, washer, tap, nut bolt, trunion, pressure gauge,valve, regulator, parts released from valve any other brass/bronze/gun metal item at this location with/ without ferrous/ non ferrous attachment etc.un serviceable to railway use , off sorts, types, makes, capacity and sizes, broken / unbroken, burnt / unburnt and damaged / undamaged. with or without rust, dust, oil, paint, adhesives, wet and grease on as it is basis. loading by railway. note: bidders are advised to see the lot physically .delivery will be made as on as it basis. loading by railway.custodian: dms/nf/mx. confisticated lot no. 0904000226

Central Government/Public Sector

CTN :45626912

29 Jun, 2026 NA

Ambedkar Nagar - Uttar Pradesh

Tender For supply of 100272568 - 10 - t2280550048 - inside micrometer,5- 30mm,0.001mm , 100272568 - 20 - t2280550109 - inside micrometer,25-50mm,0.001mm , 100272568 - 30 - t2280515056 - micrometer,50-300mm,0.01mm , 100272568 - 40 - t2280521503 - micrometer,outside,0- 150mm,0.01mm , 100272568 - 50 - t2280520306 - micrometer,outside,100-200mm,0.01mm , 100272568 - 60 - t2280522153 - micrometer,outside,300- 400mm,0.01mm , 100272568 - 70 - t2288100997 - magnetic stand,295mm , 100272568 - 80 - t2288980344 - dial gauge,0-5mm , 100272568 - 90 - t2288980345 - dial gauge,0-10mm , 100272568 - 100 - t2288266303 - feeler gauge,0.05-1mm , 100272568 - 110 - t2288260305 - feeler gauge,0.03-2mm , 100272568 - 120 - t2280452001 - vernier caliper,0-150mm,0.02mm,530- 312 , 100272568 - 130 - t2280453004 - vernier caliper,metric inch,0-300mm , 100272568 - 140 - t2280451202 - vernier caliper,digital,0-600mm , 100272568 - 150 - t2280411419 - vernier caliper,0- 1000mm,0.02mm , 100272568 - 170 - t2288341167 - thread pitch gauge,0.4-6mm , 100272568 - 180 - t2285300804 - dial gauge,lever,0-8mm , 100272568 - 190 - t2280620093 - bevel protractor,universal,0- 300mm

Pitch Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors