Latest pivot pin scrap Tenders | Government pivot pin scrap Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

Central Government/Public Sector

CTN :45233420

30 May, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : rate contract for spares of generator (200 mw210 mw 250 mw 500 mw bhelmake) for ntpc stations - caf gasket,0107444600000/081,bhel, earthing brush assy,11391601000-00,bhel, adhesive sicomet-50,01391201068-00/6, rubber cord,01493101006-00&5, o-ring,01493101006-00/12,bhel, plug,01360601033-00/13,bhel, profile,01350201023-00&20,bhel, rbrb gasket,01660170018c&007,thri 108/44, washer,01360601033c & 14,bhel,rtr assy, o ring,32x3mm,bhel,gen,thri 108/44, packing,viton,bhel,h2 clr,thri108/44, prof prbn 501-006,91350201000c&03,bhel, ring,01393401003c&18,bhel,thri108/44, seal elmnt,01393401003c,bhel,thri108/44, hp hose te,11391801000c,bhel,thri108/44, contact pin,01360301017-00&16,bhel, round nut,01360301017-00&21,bhel, threaded ring,01360301017-00&23,bhel, sealing cover,01360301017-00&24,bhel, washer,01360301017-00 & 22,bhel, o-ring,01360301017-00&36,bhel, o ring-tg60158,166x6,bhel,thri 108/44, o-ring,01360301017-00/37,bhel, round cord,000012550100016,lmz, o-ring,01360301017-00&38,bhel, gasket,bhel,thri108/44, silicon compound-k,01360301017-00/39, o-ring,bhel,thri108/44, hardener t37,01360301017-00/40,bhel, gasket-front,bhel,thri 108/44, gasket,bhel,thri108/44, h2 seal ring te,bhel,thri108/44, h2 seal ring ee,bhel,thri108/44, o-ring,8,bhel,thri 108/44, o ring,bhel,thri 108/44, gasket-rear,bhel,thri 108/44, o ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o ring,bhel,thri 108/44, o ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, hardner hv998,bhel,thri108/44, o ring,bhel,thri 108/44, o ring,bhel,thri 108/44, o ring,bhel,thri 108/44, o ring,bhel,thri 108/44, o-ring,bhel,thri108/44, folium tape,aa2561611060, te-seal strip,01391201012-00/10,bhel, micanite flex sh,bhel, oring,01350801032c,242x6,bhel,thri108/44, asbestos powder,tgemis1-var-00&83, o-ring,01360601033-00/15,bhel, o-ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, profile,01393401003c&009,lg:2060mm,bhel, lock washer,01393401003c&006,bhel, glass tape,tgew25000012,turbo generator, gasket,91393601004c&5,bhel, lead,tgemisi-var-00&528, gasket,91393601004c&3,bhel, cross cotton tape,34,turbo generator, globe valve,11491301006-00 & 12,bhel, methyl ethyl ketone,emtmisc/var-00, solder,sn40sb, skid shoe,0136120100900002,bhel, high press hose,0139010102800011,bhel, gasket,0139120104100048,bhel,tari-108/46, gasket,0142140102000004,bhel, 108/46:rubber perbunan, brazing wire,91350701000-34,bhel, gasket seal body ee,0000537204501006, brush holder,0000512500000017, gasket,0000535100100005,bhel, strap,91350801004/37,bhel, ass mica tape,5670.269 68,bhel, sealing washer,5516.006c & 8,generator, sealing washer,5200069/40,bhel, sealing washer,000012550100069,bhel, gasket,31393501005&3,turbo generator, insulating washer,8710.138-062,bhel, insulating sleeve,6.8770.025/52, seal half ring,00005377007015, resin,tgemis 1/00 116,bhel,cy-232, aerosil powder,gr200,tgemis 1/00 86,bhel, varnish conducting,tgemis/00 56,bhel, varnish sib 642,tgemis/00 73,bhel,210mw, sealing washer,8370.070&20,thw-200-2, sealing ring,8370.071/20,turbo generator, insulating sleeve,82.8770.242&18,bhel, insulating washer,2.8710.011/10,bhel, washer,0-5372.002-00&47,turbo generator, insulating gasket,2.8766-015,generator, rubber,8503-000-6,thw-200-2, isopht.terylene tape,00005670269/00 69, sealing ring,05516.006c & 5,generator, sealing washer,1255.001c & 70,generator, sealing washer,00001255006/68, terminal bushing,00001255008/44, terminal bushing,00001255008/45, oil catcher,generator, sealing washer,0-136-03-01003 & 14, insulating bush,0-136-03-01003/17, nut,5200082/26,turbo generator, washer,0-139-34-01003 & 023, insulation washer,0-145-04-01019&26, insulation box,5200082 & 21, sealing washer,00005516006&8, washer,5200082-15

Central Government / Public Sector

CTN :45302372

01 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot non ferrous scrap - brass lump scrap - 98200045(15) cond.& u/s brass lump scrap consisting of flow lamp, oxygen regulators, 63a 5 pin plug components, spcc panel components, catenary ending cones, catenary splices, bushes, bolts, nuts, gas cutting torches, gm valves, float valves, tap bib cock, cp angle valves, dropper clips, contact wire swivel clips, marut hand compression sprayer, brush holders, terminal connectors, pg clamps, bracket direct clamps, steel wire ending cones, briddle wire dopper clips, rods, key spindle, nozzle type, dv components, trunnion body for bmbc, etc. available in the bin with or without other attachments. total gross weight: 865.6 kgs. said to contain total brass content: 845.501 kgs approx., total ms content: 5.65 kgs approx, total aluminium content: 5.194 kgs approx, total stainless-steel content: 3.14 kgs approx, and plastic, rubber, etc: 6.115 kgs approx. hsn code:74040022; gst@18% on forward charge basis. note: 1) delivery on actual weighment basis only 2) segregation not permitted. 3) purchasers/firms are requested to physically inspect the lot before offering their bids. 4) post auction no representation shall be entertained.5) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 6) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. 7) railways does not guarantee for quality, quantity description etc. location: non-ferrous ward bin no: 1.

corporations/Associations/Others

CTN :45303046

13 Jun, 2026 NA

Puruliya - West Bengal

Tender For tender for supply of locking pin coupling rod and 110v relay - wshr of power cylinder 100mm/110mm , wshr of power cylinder 150mm/160mm , coupling rod , locking pin , mechanism locking pins , link for cntrl vlv smart postnr , relay coil- 110 vac contact 230 vac 10 a

corporations/Associations/Others

CTN :45146780

06 Jun, 2026 9.30 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of instruments for vats (video assisted thoracic surgery) - trocar,size11mm, autoclavable consisting of: trocar, with blunt tip, trocar cannula, flexible, without valve, length 8.5 cm, trocar, size6mm, autoclavable consisting of: trocar, with blunt tip, trocar cannula, flexible, without valve, length 8.5 cm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size11mm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size13mm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size6mm, trocar with blunt tip, with 45 luer-lock connection for insufflations, 11mm, working length 8.5cm, parenchymal forceps, atraumatic, straight jaws, single action jaws, size 5mm, length 28 cm, consisting of: mouret metal handle with haemostat style ratchet, axial with 4 locking positions for outer tube with working insert, lung forceps, dismantling, atraumatic, curved jaws, fenestrated single-action jaws in 5mm 28 cm, consisting of: mouret metal handle with haemostat style ratchet, axial with 4 locking positions for outer tube with working insert, parenchymal forceps, atraumatic, double curved jaws, size5mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, lung forceps, atraumatic, fenestrated, single curved jaws ,size5mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, lung nodule forceps, atraumatic, fenestrated, curved jaws, single action jaws, size 5 mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, grasping forceps, cobra-jaws, 1x2teeth, straight jaws, single action jaws, size5mm, length 28cm, consisting of: metal handle with 4 locking positions outer tube with working insert, clickline parenchymal forceps, atraumatic, dismantling, without connector pin for unipolar coagulation, single action jaws, single curved jaws, size 5 mm, length 28 cm, consisting of: metal handle along with outer sheath with forceps insert, for use with linear staplers., grasping forceps, rotating, with connectorpinforunipolarcoagulation,size5mm,length30 cm, atraumatic, fenestrated, curved, single action jaws, consisting of plastic handle, without ratchet, with larger contact area, outer tube insulated & insert, kelly dissecting and grasping forceps dismantling, curved jaws, double action jaws, size 5mm, length 28 cm, consisting of: metal y-handle, with absorber1 geometry, axial, with 4 locking positions, outer tube with forceps insert, scissors insulated, straight jaws, curved scissor-blades, double action jaws, size5mm ,length 28cm, with connector pin for unipolar coagulation, consisting of: insulated metal handle with 4 locking positions, insulated outer tube with working insert, scissors, insulated, distally angled outer sheath, curved scissor-blades, scissor blades open horizontally to angulation, double action jaws, size5mm, length28cm, with connector pin for unipolar coagulation, consisting of: insulated metal handle with 4 locking positions, insulated outer tube with working insert, scissors, insulated, distally angled outer sheath, straight scissor-blades, scissor blades open parallelly to angulation, single action jaws, size 5 mm, length 28 cm, with connector pin for unipolar coagulation, consisting of: insulated metal y-handle with 4 locking positions, insulated outer tube with working insert, biopsy forceps, insulated, distally angled outer sheath, single action jaws, size 5 mm, length 28 cm, with connector pin for unipolar coagulation, consisting of: insulated metal y-handle with 4 locking positions, insulated outer tube with working insert, suction-coagulation cannula, with connector pin for unipolar coagulation with handle,size5 mm, length 28-30 cm in both distally angled sheath and straight sheath option, coagulating and dissecting electrode, l-shaped, insulated, with connector pin for unipo

CTN :45303974

04 Jun, 2026 10.0 Thousand

Tuticorin - Tamil Nadu

Tender For annual tender 2026-27 supply for electrical goods in the year in authoor town panchayat - 4 feet flourescent tube light, 40w copper choke, 40w tube light starter, 36w / 40w tubelight electronic choke, tube light side lock holder, insluation gum tape roll - isi, 1/18 vir copper wire [1/44] [90mtr], 3/20 cts copper wire [3/36] [90mtr], 7/20 cts copper wire [7/34] [90mtr], 7/16 cts copper wire [7/67] [90mtr], 19/16 cts copper wire [19/51] [90mtr], 1.5 sq.mm 3 core copper cable, 2.5 sq.mm 3 core copper cable, 4 sq.mm 3 core copper cable, 6 sq.mm 3 core copper cable, 10 sq.mm 3 core copper cable, 16 sq.mm 3 core copper cable, 36w 4pin lamp holder, 36w lamp clip, 24w t5 holder, led fitting top protection glass - street light, led fitting top protection glass - flood light, 20 / 25 mm 1 no gi bend pipe, with 2nos of pole clamps with bolts and nuts, 32 / 40 mm 1 no gi bend pipe, with 2nos of pole clamps with bolts and nuts, 6amps to 32 amps sp mcb, 40amps 2pole isolator, 63amps 4pole isolator, 32a d.p switch, mcb box, fuse unit 16 amps 240v, fuse unit 32 amps 415v, fuse unit 63 amps 415v, fuse unit 100 amps 415v (heavy duty), fuse unit 200 amps 415v (heavy duty), fuse unit 300 amps 415v (heavy duty), fuse unit 400 amps 415v (heavy duty), fuse unit 500 amps 415v (heavy duty), main switches spn 32 amps, main switches tpn 32 amps, main switches tpn 63 amps, main switches tpn 100 amps, main switches tpn 315 amps, 63a 4pmc changeover switch, 100a 4pmc changeover switch, automatic on/off street light timer switch with 24hrs 7 days programable digital timer clock, 40 amps 4 pole contactor with coil, mcb switch and connector fully wired with all accessories, street light meter/main box with wooden board, main switch, fuse carrier fully wired with all accessories, electronic 7 days 24 hrs programable ditial timer clock, 63 amps 4 pole contact with coil, 220v - 250v contactor coil, power capacitor, 9w led bulb, 15w led bulb, 30w led lamp, 24w t5 power saver lamp, 2x24w t5 power saver choke, 36w 4 pin non retrofit type cfl power saver lamp, 36w 4 pin non retrofit type cfl power saver choke, 20w high bright led 4 feet light, 20w led power saver street light fitting, 25w led power saver street light fitting, 30w led power saver street light fitting, 36w led power saver street light fitting, 50w led power saver street light fitting, 60w led power saver street light fitting, 80w led power saver street light fitting, 120w led power saver street light fitting, 150w led power saver street light fitting, 100w led power saver flood light fittings, 150w led power saver flood light fittings, 200w led power saver flood light fittings, 40w all-in-one solar led street light fittings, 60w all-in-one solar led street light fittings, 80w all-in-one solar led street light fittings, 18w to 25w led chip board, 30w to 36w led chip board, 45w to 60w led chip board, 72w to 90w led chip board, 120w to 200w led chip board, 18w to 25w led heavy duty electronic driver, 30w to 36w led heavy duty electronic driver, 45w to 60w led heavy duty electronic driver, 72w to 90w led heavy duty electronic driver, 120w to 200w led heavy duty electronic driver, 10 kv surge protector, 48` ceiling fan with all accessories, d.o.l motor starter up-to 10 hp, 10metre hot dip galvanised octogonal pole with round ring arm and 4nos of strong 5feet anchor bolts, templates, and nuts etc.. complete set, 1 hp to 10hp single phase control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., 5 hp to 7.5hp three phase fasd - auto-start / dry run protection control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., 10 hp to 25hp three phase fasd - auto-start / dry run protection control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., service charges automatic on/off st

CTN :45235847

08 Jun, 2026 NA

Tirunelveli - Tamil Nadu

Tender For corrigendum : supply of street light materials in thirukkurungudi tp - 4 feet flourescent tube light, 40w copper choke, 40w tube light starter, 36w / 40w tubelight electronic choke, tube light side lock holder, insluation gum tape roll - isi, 1/18 vir copper wire [1/44] [90mtr], 3/20 cts copper wire [3/36] [90mtr], 7/20 cts copper wire [7/34] [90mtr], 7/16 cts copper wire [7/67] [90mtr], 19/16 cts copper wire [19/51] [90mtr], 1.5 sq.mm 3 core copper cable, 2.5 sq.mm 3 core copper cable, 4 sq.mm 3 core copper cable, 6 sq.mm 3 core copper cable, 10 sq.mm 3 core copper cable, 16 sq.mm 3 core copper cable, 36w 4pin lamp holder, 36w lamp clip, 24w t5 holder, led fitting top protection glass - street light, led fitting top protection glass - flood light, 20 / 25 mm 1 no gi bend pipe, with 2nos of pole clamps with bolts and nuts, 32 / 40 mm 1 no gi bend pipe, with 2nos of pole clamps with bolts and nuts, 6amps to 32 amps sp mcb, 40amps 2pole isolator, 63amps 4pole isolator, 32a d.p switch, mcb box, fuse unit 16 amps 240v, fuse unit 32 amps 415v, fuse unit 63 amps 415v, fuse unit 100 amps 415v (heavy duty), fuse unit 200 amps 415v (heavy duty), fuse unit 300 amps 415v (heavy duty), fuse unit 400 amps 415v (heavy duty), fuse unit 500 amps 415v (heavy duty), main switches spn 32 amps, main switches tpn 32 amps, main switches tpn 63 amps, main switches tpn 100 amps, main switches tpn 315 amps, 63a 4pmc changeover switch, 100a 4pmc changeover switch, automatic on/off street light timer switch with 24hrs 7 days programable digital timer clock, 40 amps 4 pole contactor with coil, mcb switch and connector fully wired with all accessories, street light meter/main box with wooden board, main switch, fuse carrier fully wired with all accessories, electronic 7 days 24 hrs programable ditial timer clock, 63 amps 4 pole contact with coil, 220v - 250v contactor coil, power capacitor, 9w led bulb, 15w led bulb, 30w led lamp, 24w t5 power saver lamp, 2x24w t5 power saver choke, 36w 4 pin non retrofit type cfl power saver lamp, 36w 4 pin non retrofit type cfl power saver choke, 20w high bright led 4 feet light, 20w led power saver street light fitting, 25w led power saver street light fitting, 30w led power saver street light fitting, 36w led power saver street light fitting, 50w led power saver street light fitting, 60w led power saver street light fitting, 80w led power saver street light fitting, 120w led power saver street light fitting, 150w led power saver street light fitting, 100w led power saver flood light fittings, 150w led power saver flood light fittings, 200w led power saver flood light fittings, 40w all-in-one solar led street light fittings, 60w all-in-one solar led street light fittings, 80w all-in-one solar led street light fittings, 18w to 25w led chip board, 30w to 36w led chip board, 45w to 60w led chip board, 72w to 90w led chip board, 120w to 200w led chip board, 18w to 25w led heavy duty electronic driver, 30w to 36w led heavy duty electronic driver, 45w to 60w led heavy duty electronic driver, 72w to 90w led heavy duty electronic driver, 120w to 200w led heavy duty electronic driver, 10 kv surge protector, 48` ceiling fan with all accessories, d.o.l motor starter up-to 10 hp, 10metre hot dip galvanised octogonal pole with round ring arm and 4nos of strong 5feet anchor bolts, templates, and nuts etc.. complete set, 1 hp to 10hp single phase control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., 5 hp to 7.5hp three phase fasd - auto-start / dry run protection control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., 10 hp to 25hp three phase fasd - auto-start / dry run protection control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., service charges automatic on/off street light timer sw

CTN :45263449

01 Jun, 2026 NA

Tirunelveli - Tamil Nadu

Tender For annual tender-2026-27-street light materials supply-veeravanallur town panchayat - insluation gum tape roll - isi, 1/18 vir copper wire [1/44] [90mtr], 3/20 cts copper wire [3/36] [90mtr], 7/20 cts copper wire [7/34] [90mtr], 7/16 cts copper wire [7/67] [90mtr], 19/16 cts copper wire [19/51] [90mtr], 1.5 sq.mm 3 core copper cable, 2.5 sq.mm 3 core copper cable, 4 sq.mm 3 core copper cable, 6 sq.mm 3 core copper cable, 10 sq.mm 3 core copper cable, 16 sq.mm 3 core copper cable, 36w 4pin lamp holder, 36w lamp clip, 24w t5 holder, 20 / 25 mm 1 no gi bend pipe, with 2nos of pole clamps with bolts and nuts, 32 / 40 mm 1 no gi bend pipe, with 2nos of pole clamps with bolts and nuts, 6amps to 32 amps sp mcb, 40amps 2pole isolator, 63amps 4pole isolator, 32a d.p switch, mcb box, fuse unit 16 amps 240v, fuse unit 32 amps 415v, fuse unit 63 amps 415v, fuse unit 100 amps 415v (heavy duty), fuse unit 200 amps 415v (heavy duty), fuse unit 300 amps 415v (heavy duty), fuse unit 400 amps 415v (heavy duty), fuse unit 500 amps 415v (heavy duty), main switches spn 32 amps, main switches tpn 32 amps, main switches tpn 63 amps, main switches tpn 100 amps, main switches tpn 315 amps, 63a 4pmc changeover switch, 100a 4pmc changeover switch, automatic on/off street light timer switch with 24hrs 7 days programable digital timer clock, 40 amps 4 pole contactor with coil, mcb switch and connector fully wired with all accessories, street light meter/main box with wooden board, main switch, fuse carrier fully wired with all accessories, electronic 7 days 24 hrs programable ditial timer clock, 63 amps 4 pole contact with coil, 220v - 250v contactor coil, power capacitor, 9w led bulb, 15w led bulb, 30w led lamp, 36w 4 pin non retrofit type cfl power saver lamp, 36w 4 pin non retrofit type cfl power saver choke, 20w high bright led 4 feet tube light, 20w led power saver street light fitting, 25w led power saver street light fitting, 30w led power saver street light fitting, 36w led power saver street light fitting, 50w led power saver street light fitting, 60w led power saver street light fitting, 80w led power saver street light fitting, 120w led power saver street light fitting, 150w led power saver street light fitting, 100w led power saver flood light fittings, 150w led power saver flood light fittings, 200w led power saver flood light fittings, 40w all-in-one solar led street light fittings, 60w all-in-one solar led street light fittings, 80w all-in-one solar led street light fittings, 18w to 25w led chip board, 30w to 36w led chip board, 45w to 60w led chip board, 72w to 90w led chip board, 120w to 200w led chip board, 18w to 25w led heavy duty electronic driver, 30w to 36w led heavy duty electronic driver, 45w to 60w led heavy duty electronic driver, 72w to 90w led heavy duty electronic driver, 120w to 200w led heavy duty electronic driver, 10 kv surge protector, 48` ceiling fan with all accessories, d.o.l motor starter up-to 10 hp, 10metre hot dip galvanised octogonal pole with round ring arm and 4nos of strong 5feet anchor bolts, templates, and nuts etc.. complete set, 1 hp to 10hp single phase control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., 5 hp to 7.5hp three phase fasd - auto-start / dry run protection control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., 10 hp to 25hp three phase fasd - auto-start / dry run protection control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., service charges automatic on/off street light timer switch box, service charges for mini mast lighting system, service charges for high mast lighting system

CTN :45257673

29 May, 2026 NA

Tirunelveli - Tamil Nadu

Tender For corrigendum : tenkasi district courtallam town panchayat -maintenance of streetlights and supply of electrical spare parts required for town panchayat buildings. - 4 feet flourescent tube light, 40w copper choke, 40w tube light starter, 36w / 40w tubelight electronic choke, tube light side lock holder, insluation gum tape roll - isi, 1/18 vir copper wire [1/44] [90mtr], 3/20 cts copper wire [3/36] [90mtr], 7/20 cts copper wire [7/34] [90mtr], 7/16 cts copper wire [7/67] [90mtr], 19/16 cts copper wire [19/51] [90mtr], 1.5 sq.mm 3 core copper cable, 2.5 sq.mm 3 core copper cable, 4 sq.mm 3 core copper cable, 6 sq.mm 3 core copper cable, 10 sq.mm 3 core copper cable, 16 sq.mm 3 core copper cable, 36w 4pin lamp holder, 36w lamp clip, 24w t5 holder, led fitting top protection glass - street light, led fitting top protection glass - flood light, 20 / 25 mm 1 no gi bend pipe, with 2nos of pole clamps with bolts and nuts, 32 / 40 mm 1 no gi bend pipe, with 2nos of pole clamps with bolts and nuts, 6amps to 32 amps sp mcb, 40amps 2pole isolator, 63amps 4pole isolator, 32a d.p switch, mcb box, fuse unit 16 amps 240v, fuse unit 32 amps 415v, fuse unit 63 amps 415v, fuse unit 100 amps 415v (heavy duty), fuse unit 200 amps 415v (heavy duty), fuse unit 300 amps 415v (heavy duty), fuse unit 400 amps 415v (heavy duty), fuse unit 500 amps 415v (heavy duty), main switches spn 32 amps, main switches tpn 32 amps, main switches tpn 63 amps, main switches tpn 100 amps, main switches tpn 315 amps, 63a 4pmc changeover switch, 100a 4pmc changeover switch, automatic on/off street light timer switch with 24hrs 7 days programable digital timer clock, 40 amps 4 pole contactor with coil, mcb switch and connector fully wired with all accessories, street light meter/main box with wooden board, main switch, fuse carrier fully wired with all accessories, electronic 7 days 24 hrs programable ditial timer clock, 63 amps 4 pole contact with coil, 220v - 250v contactor coil, power capacitor, 9w led bulb, 15w led bulb, 30w led lamp, 24w t5 power saver lamp, 2x24w t5 power saver choke, 36w 4 pin non retrofit type cfl power saver lamp, 36w 4 pin non retrofit type cfl power saver choke, 20w high bright led 4 feet light, 20w led power saver street light fitting, 25w led power saver street light fitting, 30w led power saver street light fitting, 36w led power saver street light fitting, 50w led power saver street light fitting, 60w led power saver street light fitting, 72w led power saver street light fitting, 90w led power saver street light fitting, 120w led power saver street light fitting, 100w led power saver flood light fittings, 150w led power saver flood light fittings, 200w led power saver flood light fittings, 40w all-in-one solar led street light fittings, 60w all-in-one solar led street light fittings, 80w all-in-one solar led street light fittings, 18w to 25w led chip board, 30w to 36w led chip board, 45w to 60w led chip board, 72w to 90w led chip board, 120w to 200w led chip board, 18w to 25w led heavy duty electronic driver, 30w to 36w led heavy duty electronic driver, 45w to 60w led heavy duty electronic driver, 72w to 90w led heavy duty electronic driver, 120w to 200w led heavy duty electronic driver, 10 kv surge protector, 48` ceiling fan with all accessories, d.o.l motor starter up-to 10 hp, 10metre hot dip galvanised octogonal pole with round ring arm and 4nos of strong 5feet anchor bolts, templates, and nuts etc.. complete set, 1 hp to 3hp single phase control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., 5 hp to 7.5hp three phase fasd - auto-start / dry run protection control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., 10 hp to 25hp three phase fasd - auto-start / dry run protection control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in

State Government

CTN :45190381

08 Jun, 2026 14.90 Lacs

Anuppur - Madhya Pradesh

Tender For corrigendum : procurement of spares for sadc damper actuator, installed at 210 mw atps, mppgcl, chachai - for sadc actuators type : a0404112214 , sadc actuator assembly(model-a0404112214) consists of:- accessories- 04’’x04’’ cylinder, pneumatic double acting class-1 positioner fitted with 04 pressure gauge of 40mm dial, double acting alr, air filter regulator, ss tubing, fork with pin. , class-1 pneumatic double acting positioner with accessories:- manifold assembly, 04 connectors, 40mm dial pressure gauges, crank lever assembly and feedback lever etc. , pneumatic double acting positioner with in built non contact type hall sensor operated pft only , seal kit for class 1 positioner(seal, gasket and o-rings) , sleeve & spool assembly complete with 12mm o-ring for class – 1 positioner , leather bellow with clamp & nut bolt for sadc power cylinder , diaphragm assembly with seal, gasket & o-ring set for class -1 positioner , double acting air lock relay port size 1/8 inch npt (f) , main spring holder assembly for class -1 positioner , crank lever assembly mounted on cover-a base plate of class-1 positioner , double acting aluminium manifold assembly with sleeve & spool & “o ring” , feedback lever complete assembly with nuts and spring washer , o-rings & seal kit for sadc power cylinder , crank assembly sealed zz type bearing , anodised, zinc plate fork for sadc cylinder , fork pin for coupling cylinder with damper

Pivot Pin Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others

corporations/Associations/Others

State Government