Latest pivot retainer Tenders | Government pivot retainer Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

Central Government And Public Sector

CTN :45308052

11 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For manufacturing and supply of ultrasonic digital testing equipment for welded rail joints with coloured lcd tft screen, trigonometrical function and a-scan storage as per rdsos. specification no. m&c/ndt/129/2005, rev-ii, aug, 2014 with all standard accessories or similar [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45050688

26 May, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of welding portion and welding of rail joints by alumino thermic skv process (single shot crucible with automatic tapping thimble technology) including supervision, tools and plant and consumables etc. under the jurisdiction of assistant divisional engineer manendragarh of bilaspur division.

Central Government And Public Sector

CTN :45056589

26 May, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of welding portion and welding of rail joints by alumino thermic skv process (single shot crucible with automatic tapping thimble technology) including supervision, tools and plant and consumables etc in anuppur-katni section of bilaspur division.

Central Government And Public Sector

CTN :45209370

09 Jun, 2026 NA

Bhilai - Chhattisgarh

Tender For supply of welding portion and welding of rail joints by alumino thermic skv process (single shot crucible with automatic tapping thimble technology) including supervision, tools & plants and consumables etc. under the jurisdiction of aden/i/bhilai of raipur division.

Central Government And Public Sector

CTN :45209369

09 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For supply of welding portion for welding of rail joints by alumino thermic skv process (single shot crucible with automatic tapping thimble technology) including supervision, tools & plants and consumables etc. under the jurisdiction of aden/bhatapara of raipur division.

Central Government And Public Sector

CTN :45252767

16 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of welding portion and welding of rail joints by alumino thermic skvprocess (single shot crucible with automatic tapping thimble technology)including supervision, tools and plant and consumables etc. under the jurisdictionof aden/central/bsp of bilaspur division.

Central Government And Public Sector

CTN :45252768

16 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of welding portion and welding of rail joints by alumino thermic skvprocess (single shot crucible with automatic tapping thimble technology)including supervision, tools and plant and consumables etc. under the jurisdictionof aden/pendra of bilaspur division.

Central Government/Public Sector

CTN :45261948

28 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)nr 10039660434 boxn (2 )se 10079635553 boxn (3)nfr 10059660100 boxn (4)se 99078460021 brhn (5)se 10079665284 boxn (6) er 72029565792 bobrn note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 06 nos (62.340 mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod, not returnable items 1. foot step 2. loaded tie rod 3. sets of pipe lot qty. on approx basis weight 06 nos (62.340 mts) advice n0te no.-25-03387 dt-20.03.26.,003391 dt-20.03.26 and 25-03385 dt-20.03.2026note:- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot

Central Government/Public Sector

CTN :45306995

05 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap rail 52 kg remarks :- kachcha/pakka road is near the lot. no wear and tear has been provided for any scrap rails. delivery shall be made on sectional weight per meter basis only. quantity is physically available. lot no. has been painted on the lot. actual measurement is painted on each rail in meters. cutting of rails above 06 meters is allowed for ease of transportation. quantity as per-ss-11 is 1385.82 mtrs, 153 nos. 72.063 mts and is physically available at site. stockholder shall be fully responsible for any addition, deletion, alteration and variation after joint inspection . fish plates joggled fish plates glued joints, dunnage and other fitting shall be return to the stockholder. similar scrape materials lying nearby shall not be delivered, only the listed lot shall be delivered. bidders are advised to inspect the lot personally before bidding, no any claim will be entertained after sale of the lot. lot is ok for sale on above observation. sse (p.way )kjt.

Pivot Retainer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors