Latest pivot scrap Tenders | Government pivot scrap Tenders

State Government

CTN :45146120

25 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - 3 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 3 h.p. submersible pump set with column pipe from bore well, cost towards rewinding and repairing of 3 h.p submersible motor with s/f suitable winding wire, bronze bush etc. all complete after the deduction of cost of scrap materials., cost towards repairing of 3 h.p. submersible pump with s/f bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 40 mm dia. upvc column pipe., cost towards supplying and fitting (1) 40 mm dia g.m. full way valve 1 no (2) 40 mm dia nr valve 1 no (3) 40 mm dia g.i. bend 2 nos. (4) 40 mm dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrap materials., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., supplying and installation suitable size panel board for 3 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., providing all labour, tools tackles and technicians for lowering of 3 h.p submersible pump set with all accessories in the bore well, 5 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 50 mm dia. upvc column pipe., supplying and installation suitable size panel board for 5 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., providing all labour, tools tackles and technicians for lowering of 5 h.p. submersible pump set with all accessories in the bore well, 7.5 h.p. submersible set -, providing all labour, tools, tackles and technicians for taking out 7.5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 7.5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 7.5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., providing all labour, tools tackles and technicians for lowering of 7.5 h.p. submersible pump set with all accessories in the bore well, transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., provision for leakage repairing of different size of upvc sch- 80 pipe in place of existing / cracked and damaged pipe of isi approved make or equivalent make damaged pipe in trenches and replacement of pipe and fitting so as to give 1 m average cover over the socket of pipes with disposal of exc

CTN :45203461

04 Jun, 2026 10.00 Lacs

Bhopal - Madhya Pradesh

Tender For supply of elctric item coolar repair and others items - supply of electric item, supply coolar, and plumbering item, repairing work and other item, desert cooler (iron body) complete 90 100 liters, desert cooler (fiber body) complete 90 100 liters, desert cooler (iron body) complete, 70 80 liters, desert cooler (fiber body) complete, 70 80 liters, room cooler (iron body) complete, 40 50 liters, room cooler (fiber body) complete, 40 50 liters, cooler motor (copper winding), all capacity, cooler pump, all capacity, cooling pad (wood wool / honeycomb), fan blade / cooler fan, air deflector / front grill (jali), motor stand / clamp, bearing (motor/fan), capacitor, belt (if applicable), water tank repair / replacement, float valve, drain plug, overflow pipe, water distribution pipe system, switch board with regulator, electric wiring work, mcb / fuse protection, earthing wire, 3 pin plug top, wheel / stand, iron body repair (welding, painting), fiber body repair (crack fixing), installation charges (new cooler), transportation charges, complete servicing (cleaning, repair, testing & commissioning), old cooler repair (complete overhauling) per unit, disposal of scrap / old parts, warranty on parts & service minimum 1 year, new cooler technical specification (air delivery, power, copper motor), rate inclusive of all taxes, ceiling fan new, 48 inch / 1200 mm, wall fan new, 16 inch / 400 mm, ceiling fan motor, wall fan motor, fan blade (ceiling/wall), capacitor (fan), fan regulator, oscillation mechanism (wall fan), fan guard / grill (wall fan), down rod (ceiling fan), shackle / clamp kit (ceiling fan), fan wiring & installation, fan repairing / servicing (complete), bearing replacement (fan), fan cleaning & overhauling, pvc pipe 1 inch, pvc pipe 1.5 inch, pvc pipe 2 inch, pvc pipe 3 inch, pvc pipe 4 inch, pvc elbow 1 inch, pvc elbow 1.5 inch, pvc elbow 2 inch, pvc elbow 3 inch, pvc elbow 4 inch, pvc tee 1 inch, pvc tee 1.5 inch, pvc tee 2 inch, pvc tee 3 inch, pvc tee 4 inch, pvc socket 1 inch, pvc socket 1.5 inch, pvc socket 2 inch, pvc socket 3 inch, pvc socket 4 inch, pvc reducer 1x inch, pvc reducer 2x1.5 inch, pvc bend 2 inch, pvc bend 3 inch, pvc bend 4 inch, pvc door tee 2 inch, pvc door tee 3 inch, pvc door tee 4 inch, pvc p trap 1.5 inch, pvc p trap 2 inch, pvc floor trap 4x4 inch, pvc floor trap 5x5 inch, pvc nahani trap standard size, pvc end cap 1 inch, pvc end cap 2 inch, pvc end cap 3 inch, pvc end cap 4 inch, pvc pipe clamp all sizes, pvc solvent cement 100ml, pvc solvent cement 250ml, cpvc pipe inch, cpvc pipe inch, cpvc pipe 1 inch, cpvc elbow inch, cpvc elbow inch, cpvc elbow 1 inch, cpvc tee inch, cpvc tee inch, cpvc tee 1 inch, cpvc socket inch, cpvc socket inch, cpvc socket 1 inch, cpvc union inch, cpvc union inch, cpvc union 1 inch, cpvc female adapter inch, cpvc female adapter inch, cpvc male adapter inch, cpvc male adapter inch, cpvc brass elbow inch, cpvc brass tee inch, cpvc ball valve inch, cpvc ball valve inch, cpvc ball valve 1 inch, cpvc tank nipple inch, cpvc tank nipple inch, cpvc tank nipple 1 inch, cpvc pipe clamp all sizes, cpvc solvent cement standard, bib cock tap inch, pillar cock tap inch, angle valve inch, concealed stop cock inch, sink cock standard size, swan neck tap standard size, ptmt tap inch, brass tap inch, shower set standard size, health faucet standard size, jet spray set standard size, connection pipe 18 inch, connection pipe 24 inch, connection pipe 36 inch, waste coupling standard size, bottle trap 1.25 inch, flush valve standard size, western commode standard size, indian toilet seat standard size, wash basin standard size, urinal standard size, cistern tank 5 liter, cistern tank 10 liter, pvc flush pipe standard size, seat cover standard size, basin waste pipe 1.25 inch, mirror standard size, soap dish standard size, towel rod standard size, water tank 500 liter, water tank 1000 liter, water tank 2000 liter, ball valve inch, ball valve inch, ball valve 1 inch, tan

corporations/Associations/Others

CTN :45222653

29 May, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of u/s 200/210 ltr rusted empty steel drums,u/s ms coal pipes and bend scrap with ceramic lining scrap,u/s cast iron scrap,u/s conveyor roller ms scrap without rubber lining,u/s mixed ms scrap,u/s grinding ring steel scrap,u/s grinding ball scrap,u/s grinding roll scrap,u/s bull ring segment scrap,u/s esp/ gi sheet / ms tin scrap,u/s boiler air heater tube steel (including bend and damage tube) scrap,u/s air heater tube cut piece scrap,u/s boiler water wall panel scrap,u/s economizer tube coil scrap,u/s crusher hammer scrap,u/s ms pipe scrap,u/s bearing scrap,u/s aluminium scrap/ aluminium cap of bulb and tube scrap,u/s chock scrap,u/s measuring instrument/ all type and fitting scrap/ elect item scrap -25 kg,u/s lighting fitting scrap,u/s cu-ni-90/10 condenser tube scrap,u/s ss condenser tube scrap,u/s carbon brush scrap,u/s uncomplete different size panel scrap (3 nos ),u/s 1600 amp. 6.6kv sf6 breaker interrupter unit scrap,u/s 2500 amp. 6.6kv sf6 breaker interrupter unit scrap,u/s gear box sdn-630 (write off),u/s dc motor 132kw and 125 kw scrap,u/s generator transformer 200mva,u/s lube oil with drum,u/s transformer oil with drum,u/s battery scrap (25kg),u/s plastic scrap (5 kg),u/s e-waste scrap,u/s beml make hydraulic loading machine pc 220fs shovel,u/s beml make bulldozer d-80-12a

Central Government / Public Sector

CTN :45218667

22 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - elec. loco scrap : actual lot no. 03122605 0719. pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) ms loco scrap of cond. & unserviceable diesel/elec loco scrap of dampers slacks speri blocks cotter pins roller pins side tm end shields, gear wheels qty.(approx 4.995mt) saddles, liners, cbc handles, dampers sperry blocks (with rubber attachments) stoppers fulk arms brake hangers brn wagon twisted locks twi u clamps j brackets msu racers pe enclosures end covers panto base panto servomotors and covers, gear wheels camshafts inner and centre bearing shells cab fan covers liners stay plates tfp bend pipes side stoppers split pins brake shoes hitachi tm end covers rgr fixing plates cht cable base plates tmds end covers sl brackets smgr crank shaft end shields, impellers axel box covers, cp beds, pe&ce encloses, cotter pins, roller pins, housing for traction bar, side stopper, brake hanger with shoe, rsi covers seat fixing base centre pivot side barer bottom plates net for air inlets, terminal cover, deflectors, cht turrets, panto springs, servo motors, relay panels crank shafts ,guiding rods, das pot covers, brake cylinder loose parts, ,foot steps, hand brake assembly, j brackets, liners, shock absorbers, sand brackets panto springs, axel box covers ,racers collars, butterfly valves cp beds, manifold, cht turrets, side stopper, bolts and nuts pipe pcs, mvmt ducts, sand nosels, tm covers hand brake assembly, sand ejectors pins and other miscellaneous mech./memo/elec. of sorts & sizes full or broken with or without attachments. this material available at lot no.514a,0119,411b location: road no.3&4 cross road. and 1to4 cross and 2&3cross and road1 (image attached) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery

Central Government/Public Sector

CTN :45134659

19 May, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned various rejected ms spares items with or without ss or ci attachments is as below and as available in the location. delivery will be given as is where is basis. approximate weighment of above items is 932kgs. note: purchaser can inspect the materials thoroughly before e-auction, lot will be delivered as is where is basis only. 1). 13 teeth sprocket : qty. 26 nos. wt. 4.0kg/no. total wt. 104kg. approximately. 2). 14 teeth sprocket : qty. 10 nos. wt. 3.4kg/no. total wt. 34kg. approximately. 3). 32 teeth sprocket : qty. 04 nos. wt. 11.2kg/no. total wt. 44.8kg. approximately. 4). 20 teeth sprocket : qty. 15 nos. wt. 3.9kg/no. total wt. 58.5kg. approximately. 5). plummer blocks (small) : qty. 16 nos. wt. 3.4kg/no. total wt. 54.4kg. approximately. 6).plummer blocks (big) : qty. 13 nos. wt. 6.8kg/no. total wt. 88.4kg. approximately. 7). directional control valve (small) : qty. 04 nos. wt. 3.0kg/no. total wt. 12.0kg.appr. 8). directional control valve (big) : qty. 02 nos. wt. 10.8kg/no. total wt. 21.6.0kg.appr. 9). safety fire ball valve : qty. 01 no. wt. 7.0kg/no. total wt. 7.0kg.approximately 10).load hook (small) : qty. 06 nos. wt. 17.0kg/no. total wt. 102.0kg.approximately. 11).gear coupling : qty. 04 nos. wt. 10.5kg/no. total wt. 42.0kg.approximately. 12).load hook (big) : qty. 02 nos. wt. 80.0kg/no. total wt. 160.0kg.approximately. 13).wear plate (broken) : qty. 02 nos. wt. 18.75.0kg/no. total wt. 37.5kg.approximately. 14).filter cell : qty. 01 nos. wt. 21.0kg/no. total wt. 21.0kg.approximately. 15).support block : qty. 01 nos. wt. 33.6.0kg/no. total wt. 33.6kg.approximately. 16).bend saw blades : qty. 04 nos. wt. 0.9kg/no. total wt. 3.6kg.approximately. 17).ball screw rod : qty. 01 nos. wt. 3.2kg/no. total wt. 3.2kg.approximately. 18).pulley : qty. 02 nos. wt. 17kg/no. total wt. 34kg.approximately. 19).pivot pin nut : qty. 03 nos. wt. 11.8kg/no. total wt. 35.4kg.approximately. 20).dia pulley assembly : qty. 07 nos. wt. 5.0kg/no. total wt. 35kg.approximately. total 20 items approximate weight : 932.0kgs. delivery unit : in number.

Central Government/Public Sector

CTN :45135183

21 May, 2026 NA

Goa - Goa

Tender For auction sale of pway scrap - pl no. 98011224 lot no. ubl-svm-cnr-009-r-25-k cond & un-serviceable 52 kg cl-iii rails condemned and un-serviceable rails scrap consisting of rails 52 kg cl-iii,rails c/a [ 1 meter] rails = 76 nos, 935.55 rm total rails: 76 nos, total rm= 935.55 rm, total qty= 48.546 mts, in between svm-cnr stn kms 73-400/500 lh side near lc 17a, in goa state. under the custody of sse/p-way/svm,[delivery of rails will be affected on sectional weighment basis without applying factor of wear and tear] [rails of length below one meter, if available in the lot are not for sale and are to be returned to custodian]. [while delivery if any fish plate, bend fish plate, bolts, nuts etc. attached to rails to be returned to railways] note: 1] other p. way items nearby the lot are not for sale and to be returned to the custodian. 2] prospective bidders are advised to inspect the lots, put up for e-auction and as mentioned in the relevant auction catalogue, prior to bidding. 3] the detailed inventory, qty, road approach and location of the lot is as per the joint inspection report. 4] the purchasers should survey the material for road approach, location and qty before bidding the lot. after bidding no correspondence will be entertained.5) all the bidders are advised to request a delivery date at least 7 days prior the delivery request date.6) it is advised that all the bidders must select 3 unique date references to avoid rejection of delivery request.

Central Government/Public Sector

CTN :45125907

21 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - m.s. melting( i.e. rail pieces below one mtrs of various poundage 60/52kg/ 100/ 90/82/75/35lbs, erc /broken erc,broken gate structure of angle, fish plates , broken jfp, broken f/plate of various poundage, bridge checker plate, conversion material, wooden &t/out bearing plate, slide chairs, welding riser material , two way keys, ¿j¿ type erc, m.s. liner, check rail cut pcs, t/rails, s/r, w/r,v/rail cut pieces, washers, tie bars, tie bars fencing, nut bolts various types ,g/joints of rail 60/52kg, bridge girder broken materials ,st & xing sleepers cut pcs, sej cut rail pcs of t/r, stretcher bar, switch chairs ,plate screw, rail dollies , light weight rail cum road trolly, welded chain, m.s.angle, m.s.rod, m.s.sheet, stand, welding equipment & tools box, crucible charge, bend pipe, chisel, various type boards, plier com, various type drills , cutter 52kg/60kg, crushible carring ring,fork, stand, nozzal, moluld shoes 60kg/52kg, tourch house pipe switch fittings & various types of p.way fittings etc¿¿¿.¿¿.

Central Government/Public Sector

CTN :45125910

21 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - m.s. melting( i.e. rail pieces below 01 mtrs of various poundage 60/52kg/ 100/ 90/82/75/35lbs, erc,broken gate structure of angle, fish plates , broken jfp, f/plate of various poundage, bridge plate, conversion material, t/out bearing plate, slide chairs, two way keys, ¿j¿ type erc, m.s. liner, c/r , t/rails, s/r, w/r,v/rail cut pieces, washers, tie bars/ fencing, nut bolts various types ,g/j of rail 60/52kg, bridge girder broken materials ,st & xing sleepers cut pcs, sej cut rail pcs of t/r, stretcher bar, plate screw, bar strainghting crow bar, beater- pick, pans. mortor, wire, basket, shovel, rail- tong, hs lamp, wire clow, pawrah, various type hammers, augers, adzes, blunt ended crow bar , bar tommy, ballast rake, boxes tools iran, chain gates, cold sets, jim crew, push trolly, pick. axes , panches pin slopping, solid box spanner, empty drum 20litrs cap. e.r.c extractor, first aid box for rail fracture, rail dollies , adjustable spanner- f/ bolt & light weight , light weight rail cum road trolly, chamfering bit, thermit welding tools equipment & accessories 52kg/60kg and mechanical equipment , push trolly wheels, welded chain, m.s.angle, m.s.rod, m.s.sheet, ballast screen, straight edgs 1 m long/10cm, universal molding, vapariser keys, stand, welding equipment & tools box, crucible charge, bend pipe, chisel, various type boards, plier com, various type drills , cutter 52kg/60kg, crushible carring ring,fork, stand, nozzal, moluld shoes 60kg/52kg, tourch house pipe switch fittings & various types of p.way fittings etc¿¿¿.¿¿.

Central Government/Public Sector

CTN :45135286

22 May, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms consisting of condemned, corroded, bend and straight doors and all long and sort size condemned, corroded, bend and straight ms sheet, doorway cross bar, released from boxn wagons. weight= 90 mts. for custodian information ss-11 no. jbp/nkj/c and w/ms 03/26/61 dt. 10.03.2026. ds-8 note no. 141987 dt. 13.04.2026. mode of delivery by actual weight only.

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

Pivot Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors