Latest pivot spares Tenders | Government pivot spares Tenders

State Government

CTN :41355801

12 Aug, 2025 NA

Delhi - Delhi

Tender For repairing of all gear box and its accessories at wazirabad barrage. - dismantling of gearbox by removing both end couplings and extracting the complete shaft assembly from the barrage gates. this includes removal of thrust and steel blocks using skilled labour and specialized lifting equipment. the gearbox top cover (top half) shall be removed, followed by detachment of the bottom half from the main gearbox body. all internal components parts gear, changer gear assembly, bearing, limit shift assembly and shaft shall be carefully removed in sequence, ensuring proper identification and documentation of their orientation and order for accurate reassembly., dismantling of drumbox assembly by removing both end couplings and extracting the complete shaft,bear and gear assembly from the drum box .. all internal components parts gear, changer gear assembly, bearing, limit shift assembly and shaft shall be carefully removed in sequence, ensuring proper identification and documentation of their orientation and order for accurate reassembly., thorough cleaning of all components to remove debris, contaminants, and residual lubricants using appropriate cleaning agents and methods. detailed inspection of each component to assess condition, identify wear, damage, or corrosion, and document findings for further repair or replacement as required., repair of limit switch assembly of gear box including the complete overhauling /oiling and greasing including replacement of parts as per sample ., replacement of normally open (no) switch and contactor with a relay, along with the complete installation of electrical components for the gear box in the hoisting mechanism of the barrage system, replacement of brake pad as per sample along with complete fitting and integration in the gearbox assembly, replacement of brake coil as per sample along with complete fitting and integration in the gearbox assembly, replacement of bearing no 6315/c4 djb approved makes, replacement of bearing no 6312m/c3 djb approved makes, replacement bearing no 6308 2rs1 djb approved makes, replacement bearing no 6310 2rs1 djb approved makes, complete assembly of the gearbox, including packing, greasing, and installation of both end shafts with cast iron (c.i.) couplings and bolts. ensure proper alignment and secure fastening to maintain efficient power transmission and operational reliability, complete overhauling and lubrication of all moving and critical components of the drum box assembly of the gearbox, using appropriate tools such as grease guns and nipples. the work shall be carried out by skilled labor as per site requirements. ensure proper lubrication with the specified grade and viscosity of grease to maintain optimal performance and prevent wear and tear of mechanical parts including internal parts of painting, the work involves achieving precise/making alignment of the shaft connecting the drum box and gear box in the hoisting mechanism of the barrage. proper alignment is critical to prevent deviation from the guide grooves during operation particularly during lifting and to ensure long-term stability and accuracy of sluice gate movement.the job includes dismantling the existing shaft (which transmits motion between the drum box and gear box), carrying out realignment, and reinstalling the shaft with high precision. to restore the system to optimal operating condition, the work shall also involve the replacement of associated hardware components as required such as bearings, couplings, keys, and fasteners.this intervention is essential for the reliable and efficient functioning of the sluice gate lifting system and to prevent operational issues during gate actuation., after cleaning and overhauling the gear and shaft of the gearbox, refit and them in their original positions with making alignment with all movement parts of gear box and ensure that they are functioning properly., conduct load testing of 3under sluice and 3weir side gates and weir side gates during

State Government

CTN :41354685

18 Aug, 2025 2.22 Lacs

Kolkata - West Bengal

Tender For ipgmer-sskm hospital-repairing of ug sewer line with 150 mm dia and 100 mm dia upvc pipe and construction of inspection pit and s/f/f polymer reinforced core pit cover at east side of pgt hostel during the year 2025-26. (civil works and s p works)

CTN :41333623

18 Aug, 2025 29.32 Lacs

Multi City - Rajasthan

Tender For tn-mm-2089 supply of spares of esp for 6 x 250 mw, unit 1 to 6, stage i to iv, stps, rvun suratgarh - outer arm (c.e. rapping), outer arm (e.e. rapping), grip coupling, shock pad 30x80x155, gland coupler for coll. electrode rapp. sys., plain bearing, inner arm, pin wheel-ii (small), c.i. bearing for vertical shaft eerm, sleeve tube, shaft insulator housing cover, sleeve bearing with bracket for vertical shaft eerm, u-guide, inspection door grip washer

CTN :41351994

20 Aug, 2025 NA

Kanchrapara - West Bengal

Tender For supply of gasket for modified inspection cover for tm type hs15250 a to clw drg.10s- 778-684 rev 1. [ warranty period: 30 months after the date of delivery ]

CTN :41101352

12 Aug, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of manholes for grse acoustic research ship project : : - wt_manhole cover co600x400_ch100 - aotype , ot_manhole cover co600x400 - do type , wt_manhole cover co600x400 - do type , contingency spare - nitrile gasket_600x400 , contingencyspare - neoprene gasket_600x400 , contingencyspare - spanner for conical nut , contingency spare - conical nut , mtc and gc - soft copy , mtc and gc - hard copy , inspection and test certificate - soft copy , inspection and test certificate - hard copy

CTN :41287395

08 Aug, 2025 6.06 Lacs

Chandigarh - Chandigarh

Tender For replacement of electrical accessories, ceiling fan and tube lights in inspection bungalow building, sector 19 chandigarh. - dsr item no. 1.10 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required., group c, dsr item no. 1.15 rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /pvc conduit including dismantling as required., group c, dsr item no. 1.21 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 20 mm, 25 mm, dsr item no 1.17 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, dsr item no.1.24 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., 5/6 a switch, 3 pin 5/6 a socket outlet, dsr item no.1.25 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., dsr item no.1.26 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required., dsr item no.1.27 supplying and fixing following size/ modules, gi box along with modular base & cover plate for modular switches in recess etc. as required., 1 or 2 module (75 mmx75 mm), 3 module (100 mmx75 mm), 4 module (125 mmx75 mm), 6 module (200 mmx75 mm), 8 module (125 mmx125 mm), 12 module (200 mmx150 mm), dsr item no.1.31 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required., dsr item no.1.32 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 a & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required., dsr item no.1.57 supplying & fixing suitable size gi box with modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, "c" curve including connections, painting etc. as required., dsr item no. 2.10 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required., single pole, dsr item no.2.5 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer) as required (note: vertical type mcb tpdb is normally used where 3 phase outlets are required)., 8 way (4 + 24), double door, s/i/t/c of 1x18/20watt. led box type fittings made of crca sheet with 1 nos. led tube rods. the fittings should be installed on existing surface. the led tube rod should be of philips/ wipro/ havells/ bajaj/ crompton/ trilux/ panasonic/ lt/ jaquar/ surya make of polycarbonate material only. (as per complete item no. 14 of the dnit)., s/i/t/c o

Central Government/Public Sector

CTN :41290895

22 Aug, 2025 NA

Koraput - Odisha

Tender For supply of spares of jumbo platform trucks d d - 52-7041-brass-nut-and-bolt , 52-10964-main-moving- cont-assy , 52-638-copper-tips , 52-35182-insulater- tube , 52-7042-insulating-bushing , 52-30835-base- plate , 52-640-no-fix-contact , 52-634-no-open- moviong-contact , 52-30838-pin-with-cup-washer , 52-10030-compression-spring , 52-10031-tension- spring , 52-637-contact-holder , 52-10033-tension- spring , 52-35186-insulating-strip , 52-639-contact- brazed , 52-10034-brass-strip , 52-629-contact- brazed , 52-10035-fuse , 52-646-horn , 52-30827- aresistance-small , 52-645-reverse-forward-switch , 52-27354-no-contactor , 52-25277-speed- controller , 52-7043-copper-lugs , 52-30843-copper- lugs , 52-644-ignition-switch , 52-10036-horn-push- button , 52-21844-gasket-inspection , 52-98791- gasket-inspection , 52-672-ball-bearing , 52-98778- dust-cover , 52-673-thrust-bearing , 52-750-seal- washer , 52-751-oil-seal , 52-10037-roller-bearing , 52-10038-ball-bearing , 52-10039-thrust-bearing , 52- 10040-ball-bearing , 52-10041-ball-bearing , 52-10044- steering-coller

Central Government And Public Sector

CTN :41309224

19 Aug, 2025 NA

Raipur - Chhattisgarh

Tender For supply of modified inspection cover with threaded block of size : 40 x 40 x 15 mm -2 nos . and hex hea d bolt size:18x40mm of 8.8 grade -2 nos. for hitachi traction motor to drawing no. skel-4737 for dimensio nal/ other pupose and drg.no. 10r 793-526 for raw material purpose. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41281069

22 Aug, 2025 NA

Coimbatore - Tamil Nadu

Tender For manufacture and supply of 3 aspect frp made road warning signal unit (modified) to drg.no.cwm 0 0114 alt-1 or latest in set. one set consists of :- 1) cabinet to drg.no.cwm 00214 alt-1 or latest:1 no. 2) cover to dr g.no.cwm 00314 alt-1 or latest : 1 no. 3) hooter supporting plate to drg.no.cwm 00414 or latest:1 no. 4) base to drg.no.cwm 00514 alt-1 or latest: 1 no. 5) hood to drg.no.cwm 00614 or latest : 3 nos. 6) all fasteners to assembl e total assembly as per drg.no.cwm00114 alt-1 or latest, including fixing of all parts like led in cabinet, base on po le etc. technical specification and quality acceptance checklist for third party inspection as per enclosed annexure s. [ warranty period: 24 months after the date of delivery ]

CTN :41251538

08 Aug, 2025 NA

Sagar - Madhya Pradesh

Tender For tender for supply of boqmt37 d d- philips head screw driver 100 mm long ti , screw driver 8 , ring spanner 16x17 mm f1-5120-001597 , wheel nut spanner & tommy bar complete , light extension inspection no 2 with 10 , seal front oil 32x47x6 , head assy cylinder , sensor water temperature , bush , cord set high tension , lamp assy fornt fog , cover fuse box

Pivot Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector